Développement d’un système d’actionnement utilisant la combustion d’une source d’énergie chimique pour la robotique mobile

Les systèmes d’actionnement couramment utilisés sur les systèmes de robotiques mobiles tels que les exosquelettes ou les robots marcheurs sont majoritairement électriques. Les batteries couplées à des moteurs électriques souffrent toutefois d’une faible densité de stockage énergétique et une faible densité de puissance, ce qui limite l’autonomie de ces dispositifs pour une masse de système donnée. Une étude comparative des systèmes d’actionnement potentiels a permis de déterminer que l’utilisation d’une source d’énergie chimique permettait d’obtenir une densité de stockage énergétique supérieure aux batteries. De plus, il a été déterminé que l’utilisation de la combustion directement dans un actionneur pneumatique souple permettrait d’obtenir une densité de puissance beaucoup plus élevée que celle des moteurs électriques. La conception, la fabrication et la caractérisation de plusieurs types d’actionneurs pneumatiques pressurisés directement par la combustion d’une source d’énergie chimique ont permis d’évaluer la faisabilité de l’approche, dans un contexte de robotique mobile, plus précisément pour des tâches de locomotion. Les paramètres permettant d’obtenir une efficacité énergétique élevée ont été étudiés. Il a été démontré que le ratio de compression et le ratio d’expansion doivent être optimisés. De plus, comme les pertes thermiques sont le mécanisme de perte dominant, le ratio d’équivalence devrait être réduit au minimum. Parmi les carburants usuels, l’hydrogène permet d’atteindre les valeurs de ratio d’équivalence les plus faibles, ce qui en fait un choix de carburant idéal. Les résultats expérimentaux ont été utilisés pour corréler un modèle analytique d’un actionneur pneumatique à combustion. Ce modèle analytique est par la suite utilisé pour vérifier la faisabilité théorique de l’utilisation de l’approche d’actionnement pour fournir la puissance à un dispositif d’assistance à la locomotion.

Optimization of wastepaper sludge ash (WSA) in robust cementitious systems

Abstract : Wastepaper sludge ash (WSA) is generated by a cogeneration station by burning wastepaper sludge. It mainly consists of amorphous aluminosilicate phase, anhydrite, gehlenite, calcite, lime, C2S, C3A, quartz, anorthite, traces of mayenite. Because of its free lime content (~10%), WSA suspension has a high pH (13). Previous researchers have found that the WSA composition has poor robustness and the variations lead to some unsoundness for Portland cement (PC) blended WSA concrete. This thesis focused on the use of WSA in different types of concrete mixes to avoid the deleterious effect of the expansion due to the WSA hydration. As a result, WSA were used in making alkali-activated materials (AAMs) as a precursor source and as a potential activator in consideration of its amorphous content and the high alkaline nature. Moreover, the autogenous shrinkage behavior of PC concrete at low w/b ratio was used in order to compensate the expansion effect due to WSA. The concrete properties as well as the volume change were investigated for the modified WSA blended concrete. The reaction mechanism and microstructure of newly formed binder were evaluated by X-ray diffraction (XRD), calorimetry, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). When WSA was used as precursor, the results showed incompatible reaction between WSA and alkaline solution. The mixtures were not workable and provided very low compressive strength no matter what kinds of chemical activators were used. This was due to the metallic aluminum in WSA, which releases abundant hydrogen gas when WSA reacts with strong alkaline solution. Besides, the results of this thesis showed that WSA can activate the glassy phase contained in slag, glass powder (GP) and class F fly ash (FFA) with an optimum blended ratio of 50:50. The WSA/slag (mass ratio of 50:50) mortar (w/b of 0.47) attained 46 MPa at 28 days without heat curing assistance. A significant fast setting was noticed for the WSA-activated binder due to the C3A phase, free lime and metallic aluminum contained in the WSA. Adding 5% of gypsum can delay the fast setting, but this greatly increased the potential risk of intern sulfate attack. The XRD, TGA and calorimetry analyses demonstrated the formation of ettringite, C-S-H, portlandite, hydrogarnet and calcium carboaluminate in the hydrated binder. The mechanical performance of different binder was closely related to the microstructure of corresponding binder which was proved by the SEM observation. The hydrated WSA/slag and WSA/FFA binder formed a C-A-S-H type of gel with lower Ca/Si ratio (0.47~1.6). A hybrid gel (i.e. C-N-A-S-H) was observed for the WSA/GP binder with a very low Ca/Si ratio (0.26) and Na/Si ratio (0.03). The SEM/EDX analyses displayed the formation of expansive gel (ettringite and thaumasite) in the gypsum added WSA/slag concrete. The gradual emission of hydrogen gas due to the reaction of WSA with alkaline environment significantly increased the porosity and degraded the microstructure of hydrated matrix after the setting. In the last phase of this research WSA-PC blended binder was tailored to form a high autogenous shrinkage concrete in order to compensate the initial expansion. Different binders were proportioned with PC, WSA, silica fume or slag. The microstructure and mechanical properties of concrete can be improved by decreasing w/b ratios and by incorporating silica fume or slag. The 28-day compressive strength of WSA-blended concrete was above 22 MPa and reached 45 MPa when silica fume was added. The PC concrete incorporating silica fume or slag tended to develop higher autogenous shrinkage at low w/b ratios, and thus the ternary binder with the addition of WSA inhibited the long term shrinkage due to the initial expansion property to WSA. In the restrained shrinkage test, the concrete ring incorporating the ternary binder (PC/WSA/slag) revealed negligible potential to cracking up to 96 days as a result of the offset effect by WSA expansion. The WSA blended regular concrete could be produced for potential applications with reduced expansion, good mechanical property and lower permeability.