A neural network seismic detector

This experimental study focuses on a detection system at the seismic station level that should have a similar role to the detection algorithms based on the ratio STA/LTA. We tested two types of neural network: Multi-Layer Perceptrons and Support Vector Machines, trained in supervised mode. The universe of data consisted of 2903 patterns extracted from records of the PVAQ station, of the seismography network of the Institute of Meteorology of Portugal. The spectral characteristics of the records and its variation in time were reflected in the input patterns, consisting in a set of values of power spectral density in selected frequencies, extracted from a spectro gram calculated over a segment of record of pre-determined duration. The universe of data was divided, with about 60% for the training and the remainder reserved for testing and validation. To ensure that all patterns in the universe of data were within the range of variation of the training set, we used an algorithm to separate the universe of data by hyper-convex polyhedrons, determining in this manner a set of patterns that have a mandatory part of the training set. Additionally, an active learning strategy was conducted, by iteratively incorporating poorly classified cases in the training set. The best results, in terms of sensitivity and selectivity in the whole data ranged between 98% and 100%. These results compare very favorably with the ones obtained by the existing detection system, 50%.

Model comparison for temperature estimation inside buildings

This paper presents a comparison between a physical model and an artificial neural network model (NN) for temperature estimation inside a building room. Despite the obvious advantages of the physical model for structure optimisation purposes, this paper will test the performance of neural models for inside temperature estimation. The great advantage of the NN model is a big reduction of human effort time, because it is not needed to develop the structural geometry and structural thermal capacities and to simulate, which consumes a great human effort and great computation time. The NN model deals with this problem as a “black box” problem. We describe the use of the Radial Basis Function (RBF), the training method and a multi-objective genetic algorithm for optimisation/selection of the RBF neural network inputs and number of neurons.

Anytime information processing based on fuzzy and neural network models

In modern measurement and control systems, the available time and resources are often not only limited, but could change during the operation of the system. In these cases, the so-called anytime algorithms could be used advantageously. While diflerent soft computing methods are wide-spreadly used in system modeling, their usability in these cases are limited.

Neural network classification of cerebral embolic signals

The presence of circulating cerebral emboli represents an increased risk of stroke. The detection of such emboli is possible with the use of a transcranial Doppler ultrasound (TCD) system.

B-splines neural network assisted PID autotuning

This papers describes an extantion of previous works on the subject of neural network proportional, integral and derivative (PID) autotuning. Basically, neural networks are employed to supply the three PID parameters, according to the integral of time multiplied by the absolute error (ITAE) criterion, to a standard PID controller.

On-line adaptation of neural network

The Proportional Integral and Devirative (PID) controller autotuning is an important problem, both in practical and theoretical terms. The autotuning procedure must take place in real-time, and therefore the corresponding optimisation procedure must also be executed in real-time and without disturbing on-line control.

Recent developments in neural network PID autotuning

PID controllers are widely used in industrial applications. Because the plant can be time variant, methods of autotuning of this type of controllers, are of great economical importance, see (Astrom, 1996). Since 1942, with the work of Ziegler and Nichols (Ziegler and Nichols, 1942), several methods have been proposed in the literature. Recently, a new technique using neural networks was proposed (Ruano et al., 1992). This technique has been shown to produce good tunings as long as certain limitations are met.

Neural network assisted autotuning of industrial PID controllers

A recent servey (1) has reported that the majority of industrial loops are controlled by PID-type controllers and many of the PID controllers in operation are poorly tuned. poor PID tuning is due to the lack of a simple and practical tuning method for avarage users, and due to the tedious procedurs involved in the tuning and retuning of PID controllers.

Comparison of alternative approaches to neural network PID autotuning

In this paper, a scheme for the automatic tuning of PID controllers on-line, with the assistance of trained neural networks, is proposed. The alternative approaches are presented and compared.

A neural network PID autotuner

Proportional, Integral and Derivative (PID) regulators are standard building blocks for industrial automation. Their popularity comes from their rebust performance and also from their functional simplicity. Whether because the plant is time-varying, or because of components ageing, these controllers need to be regularly retuned.

A neural network controller

Proportional, Integral and Derivative (PID) regulators are standard building blocks for industrial automation. The popularity of these regulators comes from their rebust performance in a wide range of operating conditions, and also from their functional simplicity, which makes them suitable for manual tuning.

A new formulation of the learning problem for a neural network controller

In this paper we consider the learning problem for a class of multilayer perceptrons which is practically relevant in control systems applications. By reformulating this problem, a new criterion is developed, which reduces the number of iterations required for the learning phase.

Predicting the greenhouse inside air temperature with RBF neural networks

The application of the Radial Basis Function (RBF) Neural Network (NN) to greenhouse inside air temperature modelling has been previously investigated (Ferreira et al., 2000a). In those studies, the inside air temperature is modelled as a function of the inside relative humidity and of the outside temperature and solar radiation. A second-order model structure previously selected (Cunha et al., 1996) in the context of dynamic temperature models identification, is used.