Comparative fixed gear studies in the Cyclades (Aegean Sea): size selectivity of small-hook longlines and monofilament gill nets

Fishing trials with monofilament gill nets and longlines using small hooks were carried out at the same fishing grounds in Cyclades (Aegean Sea) over 1 year. Four sizes of MUSTAD brand, round bent, flatted sea hooks (Quality 2316 DT, numbers 15, 13, 12 and 11) and four mesh sizes of 22, 24, 26 and 28 turn nominal bar length monofilament gill nets were used. Significant differences in the catch size frequency distributions of the two gears were found for four out of five of the most important species caught by both the gears (Diplodus annularis, Diplodus vulgaris, Pagellus erythrinus, Scorpaena porcus and Serranus cabrilla), with longlines catching larger fish and a wider size range than gill nets. Whereas longline catch size frequency distributions for most species for the different hook sizes were generally highly overlapped, suggesting little or no differences in size selectivity, gill net catch size frequency distributions clearly showed size selection, with larger mesh sizes catching larger fish. A variety of models were fitted to the gill net data, with the lognormal providing the best fit in most cases. A maximum likelihood method was also used to estimate the parameters of the logistic model for the longline data. Because of the highly overlapped longline catch size frequency distributions parameters could only be estimated for two species. This study shows that the two static gears have different impacts in terms of size selection. This information will be useful for the more effective management of these small-scale, multi-species and multi-gear fisheries. (C) 2002 Elsevier Science B.V. All rights reserved.

Species and size selectivity in a 'red' sea bream longline 'metier' in the Algarve (southern Portugal)

A longline 'metier' using small hooks for 'red' sea breams (Pagellus acarne and Pagellus erythrinus) in the Algarve (south of Portugal) was studied. Experimental longlining was carried out with three sizes of "Mustad" round bend, flatted, spade end Quality 2316 DT hooks (numbers 11, 13 and 15) and two types of bait: razor shell (Ensis siliqua) and mud shrimp (Upogebia pusilla). A total of 3 328 fish and at least 36 species were caught with 33 600 hooks fished in 28 longline sets. Five species of sea breams (Sparidae) accounted for 79% of the catch: Pagellus acarne, Pagellus erythrinus, Diplodus vulgaris, Spondyliosoma cantharus, and Boops boops. High catch rates of 20-30 fish per 100 hooks were made in a number of 1 200 hook longline sets, with total catch weights of 40 to more than 60 kg per set. In general, the smallest hook (number 15) had the highest catch rate. Bait type did not significantly affect the catch size distributions. Although more fish were caught with the razor shell bait, higher catch rates of 'red' sea breams were obtained with mud shrimp. Catch rates were also affected by the location of the fishing grounds and the time of the set, with the highest catch rates obtained when the longline was set within two hours before sunrise. A wide size range was caught for each species, with highly overlapped catch size frequency distributions for the three hook sizes used. Except for Spondyliosoma cantharus, few illegal-sized fish were caught, even with the smallest hook. The logistic model fitted by maximum likelihood was used to describe hook selectivity for Diplodus vulgaris, Pagellus acarne, Pagellus erythrinus, and Spondyliosoma cantharus. (C) Ifremer-Elsevier, Paris.

Aplicação de métodos de customer relationship management ao tratamento de dados para o desenvolvimento de negócios

Tese de Doutoramento, Gestão, na especialidade de Marketing, Faculdade de Economia, Universidade do Algarve, 2007

Effects of environmental conditions on planktonic abundances, benthic recruitment and growth rates of the bivalve mollusc Ruditapes decussatus in a Portuguese coastal lagoon

Controlling environmental parameters for the early stages of marine invertebrates have received little attention, particularly in field studies. This study involves measurement of abundances and growth rates of the bivalve Ruditapes decussatus Linnaeus 1758 during its planktonic larval and early benthic life stages in a coastal lagoon: Ria Formosa, Portugal. Measured abundances were compared with tidal amplitude, water temperature, salinity, wind velocity and direction, and a food availability indicator 2chlorophyll a). Data were obtained on abundance and prodissoconch length of the larvae, measured two tothreetimes perweek,and ofpost-larval stagesindividuals thathadsettled inartificial collectors over10months.Larval and juvenile cohorts were identified using size-frequency distributions and larval ages estimated by larval shell growth lines.

An alternative methodology for fitting selectivity curves to pre-defined distributions

A non-linear least-squares methodology for simultaneously estimating parameters of selectivity curves with a pre-defined functional form, across size classes and mesh sizes, using catch size frequency distributions, was developed based on the model of Kirkwood and Walker [Kirkwood, G.P., Walker, T.L, 1986. Gill net selectivities for gummy shark, Mustelus antarcticus Gunther, taken in south-eastern Australian waters. Aust. J. Mar. Freshw. Res. 37, 689-697] and [Wulff, A., 1986. Mathematical model for selectivity of gill nets. Arch. Fish Wiss. 37, 101-106]. Observed catches of fish of size class I in mesh m are modeled as a function of the estimated numbers of fish of that size class in the population and the corresponding selectivities. A comparison was made with the maximum likelihood methodology of [Kirkwood, G.P., Walker, T.I., 1986. Gill net selectivities for gummy shark, Mustelus antarcticus Gunther, taken in south-eastern Australian waters. Aust. J. Mar. Freshw. Res. 37, 689-697] and [Wulff, A., 1986. Mathematical model for selectivity of gill nets. Arch. Fish Wiss; 37, 101-106], using simulated catch data with known selectivity curve parameters, and two published data sets. The estimated parameters and selectivity curves were generally consistent for both methods, with smaller standard errors for parameters estimated by non-linear least-squares. The proposed methodology is a useful and accessible alternative which can be used to model selectivity in situations where the parameters of a pre-defined model can be assumed to be functions of gear size; facilitating statistical evaluation of different models and of goodness of fit. (C) 1998 Elsevier Science B.V.

Gill net selectivity for European hake Merluccius merluccius from southern Portugal: implications for fishery management

A study of European hake Merluccius merluccius gill net selectivity was undertaken off the Algarve (Southern Portugal), between 1999 and 2001. Four nominal mesh sizes (70, 80, 90 and 100 mm) were used in fishing trials and the 'share each length class catch total' (SELECT) method was used to fit gill net selectivity curves. Hake were caught in the same size range by all mesh sizes, between 17 and 65 cm total length. While most fishes were wedged, significant and similar proportions were entangled in all mesh sizes, contributing to the wide size range, and in some cases, bimodal shape of catch size frequency distributions. Insignificant numbers of undersized hake were caught, with most catches consisting of mature female fish. Catch rates decreased sharply with increasing mesh size. The bimodal model gave the best fit for hake that were wedged, with estimated modal lengths of 40.1, 46.7 and 51.0 cm for the 70, 80 and 90 mm nominal mesh sizes, respectively. The high catch per unit effort of the smallest mesh size, with most fish caught being female, together with the fact that the modal length of the fitted selectivity curve is well below the size at maturity for hake in Portuguese waters, suggests that the 80 mm nominal mesh size is more appropriate for ensuring resource sustainability.

Quantifying the roles of competing static gears: comparative selectivity of longlines and monofilament gill nets in a multi-species fishery of the Algarve (southern Portugal)

Fishing trials with monofilament gill nets and longlines using small hooks were carried out in Algarve waters (southern Portugal) over a one-year period. Four hook sizes of "Mustad" brand, round bent, flatted sea hooks (Quality 2316 DT, numbers 15, 13, 12 and 11) and four mesh sizes of 25, 30, 35 and 40 mm (bar length) monofilament gill nets were used. Commercially valuable sea breams dominated the longline catches while small pelagics were relatively more important in the gill nets. Significant differences in the catch size frequency distributions of the two gears were found for all the most important species caught by both gears (Boops boops, Diplodus bellottii, Diplodus vulgaris, Pagellus acarne, Pagellus erythrinus, Spondyiosoma cantharus, Scomber japonicus and Scorpaena notata), with longlines catching larger fish and a wider size range than nets. Whereas longline catch size frequency distributions for most species for the different hook sizes were generally highly overlapped, suggesting little or no differences in size selectivity, gill net catch size frequency distributions clearly showed size selection. A variety of models were fitted to the gill net and hook data using the SELECT method, while the parameters of the logistic model were estimated by maximum likelihood for the longline data. The bi-normal model gave the best fits for most of the species caught with gill nets, while the logistic model adequately described hook selectivity. The results of this study show that the two static gears compete for many of the same species and have different impacts in terms of catch composition and size selectivity. This information will I;e useful for the improved management of these small-scale fisheries in which many different gears compete for scarce resources.

The hake deepwater semi-pelagic ("pedra-bola") longline fishery in the Algarve (southern Portugal)

A 2-year study of the European hake (Merluccius merluccius) semi-pelagic ("pedra-bola) longline fishery was carried out in the Algarve (southern Portugal). This fishery takes place on the continental slope at 200-700 m depths. using monofilament longlines that are lifted off the bottom at regular intervals by glass balls. Hook selectivity trials were carried out with four hook sizes (SIAPAL brand numbers 10, 9, 7 and 5) from March to August 1997 and May to August 1998. At least 32 species of fish and invertebrates were caught, with hake dominating the catch (41 and 45% of the catch in numbers), followed by Galeus melastomus (23 and 19%), Micromesistius poutassou (10 and 7%), Benthodesmus elongatus (8 and 5%), Etmopterus pusillus (6 and 9%) and Scyliorhinus canicula (5 and 4%). Apart from the hake, and some species of commercial value such as G. melastomus (only the large individuals), Ray's bream (Brama brama, 1.4 and 4%), silver scabbard fish (Lepidopus caudatus. 1 and 2.5%), swordfish (Xiphins gladius, <1%), wreckfish (Polyprion americanus, <1%). conger eel (Conger conger. <1%), and bluemouth rockfish (Helicolenus dactylopterus, <1%)- most of the other species are discarded, used as bait in traps or consumed by the fishermen. Catch rates (number of fish per 100 hooks) for hake and for all species combined decreased significantly with hook size. Hake catch size frequency distributions for the different hook sizes in 1997 and 1998 were highly overlapped, with the four different hooks catching a wide range of sizes. Although catch size frequency distributions for the different sized hooks were not significantly different in 1997, hake caught in 1998 were characterised by smaller sizes and size ranges. (C) 2001 Elsevier Science B.V. All rights reserved.

The reproductive biology of Spondyliosoma cantharus (L.) from the SW Coast of Portugal

The study of Spondyliosoma cantharus (L.) reproduction was carried out within the framework of a project on the Fisheries resources of the south-west coast of Portugal, and was based on the analysis of the spawning season, gonad maturation, size-at-maturity, fecundity, and hermaphroditism. Spawning took place from February to April, peaking in March. Analysis of the sex ratio by size class and season showed that females were more abundant throughout the year (M/F=0.57) and in the smaller size classes. Overall size at first maturity (L-50) was 20.10 cm total length (TL), with a significant difference between males (22.41 cm, TL) and females (19.98 cm, TL). Absolute fecundity (Fa) ranged from 37,506 to 112,074 oocytes, with a mean of 61,396. A power type relationship best described the relationships between absolute fecundity and TL (Fa = 436.27TL(1.575)), and somatic weight (Fa = 2979.7SW(0.585)). The number of oocytes/g of female somatic weight ranged from 217 to 549, with a mean of 346. The reproductive strategy of this species is characterised by protogynic hermaphroditism, as indicated by the presence of individuals in transition and of testes with vestiges of preceding ovaries associated with the significant differences in the size frequency distributions of the sexes.

Alternative codends to reduce bycatch in Chilean crustacean trawl fisheries

This study was conducted to determine the reduction in bycatch and the loss of target catch in trawl hauls for three commercial crustacean species (yellow squat lobster, Cervimunida johni, nylon shrimp, Heterocarpus reedi, and red squat lobster, Pleuroncodes monodon) in central Chile. Two experiments were carried out using the covered codend method; the first used different mesh sizes (56 and 70 mm, knot-centre to knot-centre) and shapes (diamond and square), and the second tested different reduction devices (escape panel and sorting grid). We analysed the escape proportions of the species caught and the size frequency distributions of the target species and Chilean hake (Merluccius gayi), the main commercial bycatch species. The results demonstrate that it is feasible to significantly reduce bycatch while keeping losses within acceptable ranges. In particular, the best option for yellow squat lobster was the combination of a 70-mm diamond mesh with an escape panel that reduced non-target and target catches by 48% and 7%, respectively. For nylon shrimp, the best option was the use of a 56-mm diamond mesh with a sorting grid that reduced non-target and target catches by 41% and 11%, respectively. Although the results for red squat lobster were not as promising, they will help to guide future research.