Electrical characterization of the rectifying contact between aluminium and electrodeposited poly(3-methylthiophene)

A detailed investigation both of the DC and of the AC electrical properties of the Schottky barrier formed between aluminium and electrodeposited poly(3-methylthiophene) is reported. The devices show rectification ratios up to 2 x 10(4) which can be increased further after post-metal annealing. The reverse characteristics of the devices follow predictions based on the image-force lowering of the Schottky barrier, from which the doping density can be estimated, As the forward voltage increases, the device current is limited by the bulk resistance of the polymer with some evidence for injection limitation at the gold counter-electrode at high bias. In the bulk-limited regime, the device current is thermally activated near room temperature with an activation energy in the range 0.2-0.3 eV. Below about 150 K the device current is almost independent of temperature. Capacitance-voltage plots obtained at frequencies well below the device relaxation frequency indicate the presence of two distinct acceptor states, A set of shallow acceptor states are active in forward bias and are believed to determine the bulk conductivity of the polymer. A set of deeper accepters are active only for very small forward voltages and for all reverse voltages, namely when band banding causes the Fermi energy to cross these states. The density of these deeper states is approximately an order of magnitude greater than that of the shallow states. Evidence is presented also for the influence of fabrication conditions on the formation of an insulating interfacial layer at the rectifying interface. The presence of such a layer leads to inversion at the polymer surface and a modification of the I-V characteristics.

Robustness of the Estuarine Fish Assessment Index (EFAI) regarding water body definition criteria

According to the Water Framework Directive (WFD) transitional waters should be differentiated according to type and, in some cases, divided into different water bodies. This raises a dilemma in trying to define parts of a continuum. In the sequence of WFD several indices have been proposed including the Estuarine Fish Assessment Index, which can be applied taking an estuary as a whole (EFAI - without water bodies division) or divided in water bodies (EFAI(WB)). The purpose of this work is to analyze the robustness of the Estuarine Fish Assessment Index, based on three different ways of dividing Portuguese estuaries into water bodies according to different criteria (criterion 1 - distance to the estuary mouth, criterion 2 - salinity and criterion 3 - morphology, salinity and human dimension as pressure and state). In this study we evaluated at which degree these three criteria could influence the ecological quality ratio (EQR) results, when the index was applied to water body level (EFAI(WB)). Also, for each estuary, the EQR(WB) results for each criterion of EFAI(WB) were combined and weighted according to the water bodies areas (EFAI overall weighted - EFAI(Ow)). Finally, it was compared if the results obtained for each criterion with the EFAI(OW) were similar to the results of the index application taking the estuary as a whole (EFAI without water bodies division). No significant differences were found in both cases, which indicated that this index is a robust method regarding the division of the estuaries in different water bodies, which is an important element of a fish-based multimetric tool for assessing estuarine ecological quality. However, in some cases, different ecological quality statuses were achieved when applying the EFAI(Ow) or the EFAI. This work addressed several aspects regarding the possible division of water bodies at the WFD context. (C) 2012 Elsevier Ltd. All rights reserved.