11 resultados para Merluccius gayi peruanus Ginsburg
em SAPIENTIA - Universidade do Algarve - Portugal
Resumo:
This study was conducted to determine the reduction in bycatch and the loss of target catch in trawl hauls for three commercial crustacean species (yellow squat lobster, Cervimunida johni, nylon shrimp, Heterocarpus reedi, and red squat lobster, Pleuroncodes monodon) in central Chile. Two experiments were carried out using the covered codend method; the first used different mesh sizes (56 and 70 mm, knot-centre to knot-centre) and shapes (diamond and square), and the second tested different reduction devices (escape panel and sorting grid). We analysed the escape proportions of the species caught and the size frequency distributions of the target species and Chilean hake (Merluccius gayi), the main commercial bycatch species. The results demonstrate that it is feasible to significantly reduce bycatch while keeping losses within acceptable ranges. In particular, the best option for yellow squat lobster was the combination of a 70-mm diamond mesh with an escape panel that reduced non-target and target catches by 48% and 7%, respectively. For nylon shrimp, the best option was the use of a 56-mm diamond mesh with a sorting grid that reduced non-target and target catches by 41% and 11%, respectively. Although the results for red squat lobster were not as promising, they will help to guide future research.
Resumo:
Dissertação mest., Gestão da Água e da Costa, Universidade do Algarve, 2007
Resumo:
A study of European hake Merluccius merluccius gill net selectivity was undertaken off the Algarve (Southern Portugal), between 1999 and 2001. Four nominal mesh sizes (70, 80, 90 and 100 mm) were used in fishing trials and the 'share each length class catch total' (SELECT) method was used to fit gill net selectivity curves. Hake were caught in the same size range by all mesh sizes, between 17 and 65 cm total length. While most fishes were wedged, significant and similar proportions were entangled in all mesh sizes, contributing to the wide size range, and in some cases, bimodal shape of catch size frequency distributions. Insignificant numbers of undersized hake were caught, with most catches consisting of mature female fish. Catch rates decreased sharply with increasing mesh size. The bimodal model gave the best fit for hake that were wedged, with estimated modal lengths of 40.1, 46.7 and 51.0 cm for the 70, 80 and 90 mm nominal mesh sizes, respectively. The high catch per unit effort of the smallest mesh size, with most fish caught being female, together with the fact that the modal length of the fitted selectivity curve is well below the size at maturity for hake in Portuguese waters, suggests that the 80 mm nominal mesh size is more appropriate for ensuring resource sustainability.
Resumo:
Dissertação mest., Biologia Marinha, Universidade do Algarve, 2009
Resumo:
As part of two research projects for analysing bycatch and discards, we quantified catch composition, catch rates, bycatch and discard,, in two important commercial bottom trawl fisheries (crustacean and fish trawls) off the Southern coast of Portugal (Algarve). Stratified sampling by onboard observers took place from February 1999 to March 2001 and data were collected from 165 tows during 52 fishing trips. Commercial tat-get species included crustaceans: blue and red shrimp (Aristeus antennatus), deep-water rose shrimp (Parapenaeus longirostris), Norway lobster (Nepharops norvegicus); and fishes: scabreams (Diplodus spl). and Pagellus Spp.), horse Mackerels (Trachurus spp.) and European hake (Merluccius merluccius). The trawl fisheries are characterised by considerable amounts of bycatch: 59.5% and 80.4% of the overall total catch for crustacean and fish trawlers respectively. A total of 255 species were identified, which belonged to 15 classes of organisms ( 137 vertebrates, 112 invertebrates and algae). Crustacean trawlers had higher bycatch biodiversity. Bony fish (45.6% and 37.8%) followed by crustaceans (14.6% and 11.5%) were the dominant bycatch components of both crustacean and fish trawlers respectively. The influence of a number of factors (e.g. depth, fishing gear, tow duration and season) on bycatch and discards is discussed.
Resumo:
Trammel net discards in four southern European areas were considerable, with a total of 137 species (79.7% of the total) discarded 65, 105, 46 and 32 species in the Basque country (Spain), Algarve (Portugal), Gulf of Cadiz (Spain) and Cyclades islands (Greece), respectively. The overall discard rate in terms of catch numbers ranged from 15% for the Cyclades to 49% for the Algarve, with the high discard rate for the latter due largely to small pelagic fishes. Discards in the four areas consisted mainly of Trisopterus luscus (Basque country), Scomber japonicus (Algarve), Torpedo torpedo (Cadiz) and Sardina pilchardus (all three areas), and Diplodus annularis in the Cyclades. Strong seasonal variation in discarding was found, reflecting differences in metiers and the versatility of trammel nets as a gear. Discarding, both in terms of numbers of species and individuals decreased with increasing inner panel mesh size. The main reasons for discarding were: (1) species of no or low commercial value (e.g. Scomber japonicus; Torpedo torpedo), (2) commercial species that were damaged or spoiled (e.g. Merluccius merluccius), (3) undersized commercial species (e.g. Lophius piscatorius), and (4) species of commercial value but not caught in sufficient quantities to warrant sale (e.g. Sardina pilchardus). A decrease in soak time together with the appropriate choice of mesh sizes could contribute to a reduction in discarding and to improved sustainability and use of scarce resources in the small-scale, inshore multi-species fisheries of southern Europe. (C) 2007 Elsevier B.V. All rights reserved.
Resumo:
The crustacean trawl fishery off the Algarve coast (southern Portugal) takes place on the lower continental shelf and upper continental slope at depths between 150 and 600 m. This is a multi-species fishery targeting the shrimps Parapenaeus longirostris and Aristeus antennatus and the Norway lobster Nephrops norvegicus, with the latter two species the most important in the landings. The fishery is characterised by significant by-catch and discarding of a large number of species. As part of a study on the fate of trawl fishery discards, this component of the study focused on the quantification of the by-catch and discards of crustacean trawlers. Sampling took place on board seven commercial trawlers from June 1998 to October 1999. Data was collected from 48 tows in 22 fishing trips. The observers collected all of the catch that was discarded by the crew during the sorting operation and samples were taken to the laboratory for identification, weighing and measuring. The quantities of target species were recorded along with the presence of retained by-catch. Commercially valuable species that were retained included Plesiopenaeus edwardsianus, Aristeomorpha foliacea, Plesionika sp., and the fishes Lophius piscatorius and Merluccius merluccius. However, most of the species had no or little commercial value and were almost always discarded to the sea (90%). A total of 91 species were identified, 47 vertebrates and 44 invertebrates corresponding to 65 families. The Teleostei (78% and 68%) were the dominant group, both in number and weight. The species Micromesistius poutassou (34%), Gadiculus argenteus (10%) and Hoplostethus mediterraneus (8%) were the most important in weight. Ten species represented more than 82% of all discards in weight. Gadiculus argenteus (29%), Hoplostethus mediterraneus (21%) and Nezumia sclerorhynchus (10%) accounted for 60% of all discards in numbers. Data on the landed species composition is also presented.
Resumo:
Elasmobranch fish, particularly deep-sea sharks, are the most important component of the by-catch of the hake semipelagic near-bottom 'pedra-e-bola' longline fishery in the Algarve (South Portugal) and most of these fish are discarded. The effects of the removal of the lower hooks were evaluated, in terms of target and by-catch reductions, by quantifying the catches of each hook relative to the distance from the bottom. The analysis showed that most European hake (Merluccius merluccius), the target species of this fishery, were caught in the middle range of the hooks, with very few individuals caught near the bottom, whereas for sharks the situation was the opposite, with most hooked near the bottom. The removal of the lower three pairs of hooks would result in a small reduction in the catch of the target species, but a much more significant reduction in elasmobranch by-catch. In the specific case of the blackmouth catshark (Galeus melastomus), discard mortality would be further minimized due to the fact that the lower hooks capture significantly smaller animals that are always discarded compared with hooks that are more distant from the bottom.
Resumo:
The effects of an increase in cod end mesh size from 55 to 60 and 70 mm and a change of mesh configuration from 55 mm diamond to 55 turn square mesh on the size selectivity of four by-catch species (the red shrimp Aristeus antennatus, the European hake Merluccius merluccius, the horse mackerel Trachurus trachurus and the blue whiting Micromesistius poutassou) commonly captured in the crustacean fishery off the Portuguese south coast, were evaluated. Selectivity parameters for blue whiting, the most abundant species in the catches, were estimated taking into account between-haul variation, while for the remaining species, captured in much lower quantities, the selectivity estimates were based on pooled data by length class for all hauls within the same cod end. Length at 50% retention, L-50, was found to increase with mesh size and with the change in mesh configuration for all the studied species. For blue whiting trawling depth and cod end catch were found to play a role in between-haul variation by increasing L-50 as well. The results suggest that an increase in the current minimum mesh size of 55-70 mm would be advisable to be compatible with the minimum landing sizes (MLSs) of 29 mm carapace length and 27 cm total length for red shrimp and hake, respectively, while it would greatly reduce the amount of discards, particularly those for blue whiting, that accounted for approximately 50% of the total catch weight. Horse mackerel was the only species for which the use of a larger mesh size would result in a significant escapement of individuals above the MLS of 15 cm. (C) 2002 Elsevier Science B.V. All rights reserved.
Resumo:
A 2-year study of the European hake (Merluccius merluccius) semi-pelagic ("pedra-bola) longline fishery was carried out in the Algarve (southern Portugal). This fishery takes place on the continental slope at 200-700 m depths. using monofilament longlines that are lifted off the bottom at regular intervals by glass balls. Hook selectivity trials were carried out with four hook sizes (SIAPAL brand numbers 10, 9, 7 and 5) from March to August 1997 and May to August 1998. At least 32 species of fish and invertebrates were caught, with hake dominating the catch (41 and 45% of the catch in numbers), followed by Galeus melastomus (23 and 19%), Micromesistius poutassou (10 and 7%), Benthodesmus elongatus (8 and 5%), Etmopterus pusillus (6 and 9%) and Scyliorhinus canicula (5 and 4%). Apart from the hake, and some species of commercial value such as G. melastomus (only the large individuals), Ray's bream (Brama brama, 1.4 and 4%), silver scabbard fish (Lepidopus caudatus. 1 and 2.5%), swordfish (Xiphins gladius, <1%), wreckfish (Polyprion americanus, <1%). conger eel (Conger conger. <1%), and bluemouth rockfish (Helicolenus dactylopterus, <1%)- most of the other species are discarded, used as bait in traps or consumed by the fishermen. Catch rates (number of fish per 100 hooks) for hake and for all species combined decreased significantly with hook size. Hake catch size frequency distributions for the different hook sizes in 1997 and 1998 were highly overlapped, with the four different hooks catching a wide range of sizes. Although catch size frequency distributions for the different sized hooks were not significantly different in 1997, hake caught in 1998 were characterised by smaller sizes and size ranges. (C) 2001 Elsevier Science B.V. All rights reserved.
Resumo:
Three long-line methods have been studied in the Algarve: 1) small-hook long-line for inshore (less than 30 m) ‘white’ sea breams (Sparidae); 2) small-hook long-line for deeper water (40-60 m) ‘red’ sea breams; and 3) deep water (500-700 m) semi-pelagic long-line for hake Merluccius merluccius (Linnaeus, 1758). Selectivity studies were carried out with three hook sizes in the first two cases: Mustad round-bent Quality 2369 hooks, numbers 15, 13, and 11, baited with a standardsized razor-shell Ensis siliqua (Linnaeus, 1758). Four hook sizes (numbers 10, 9, 7, and 5) of Stell round-bent, eyed hooks were used in the semi-pelagic long-line selectivity study, baited with a half of a standard-sized sardine. Some factors affecting catch composition and catch rates of the small hook long-lines were also evaluated: bait, gangion length, setting time, fishing ground, and depth. Species diversity was relatively high, with 40, 36 and 27 species, respectively, in the three studies. However, the catches were dominated by a limited number of species. Catch rates (number of fish per 100 hooks) were variable (< 5 %; > 20 %), with a general decrease in catch rate with increasing hook size in all the studies. In general, the catch size distributions for the different hook sizes for each species were highly overlapping, with little or no evidence of differences in size selectivity. Hooks caught a wide size-range for each species, with few or no illegal-sized fish, in most cases. Some implications of these results for the management of multi-species, multi-gear fisheries are discussed.