Coupling anchovy eggs and hydrodynamic model as an assessement tool for estuarine ecohydrological management

Nitrate and urban waste water directives have raised the need for a better understanding of coastal systems in European Union. The incorrect application of these directives can lead to important ecological or social penalties. In the paper this problem is addressed to Ria Formosa Coastal Lagoon. Ria Formosa hosts a Natural Park, important ports of the southern Portuguese coast and significant bivalve aquaculture activity. Four major urban waste water treatment plants discharging in the lagoon are considered in this study. Its treatment level must be selected, based on detailed information from a monitoring program and on a good knowledge of the processes determining the fate of the material discharged in the lagoon. In this paper the results of a monitoring program and simulations using a coupled hydrodynamic and water quality / ecological model, MOHID, are used to characterise the system and to understand the processes in Ria Formosa. It is shown that the water residence time in most of the lagoon is quite low, of the order of days, but it can be larger in the upper parts of the channels where land generated water is discharged. The main supply of nutrients to the lagoon comes from the open sea rather than from the urban discharges. For this reason the characteristics and behaviour of the general lagoon contrasts with the behaviour of the upper reaches of the channels where the influence of the waste water treatment plants are high. In this system the bottom mineralization was found to be an important mechanism, and the inclusion of that process in the model was essential to obtain good results.

A three-dimensional hydrodynamic model with generic vertical coordinate

A three-dimensional primitive equation model and its application to a tidal estuary is described. The model solves the primitive equations for incompressible fluids with Boussinesq and hydrostatic approximations. The discretization is based on the finite volume method and allows a general vertical coordinate. The computational code is implemented in such a way that different vertical coordinates can be used in different parts of the domain. The model was designed to be able to simulate the flow both in the open ocean and in coastal and estuarine zones and can be coupled in a simple way to ecological models. The model was implemented successfully in several estuarine and coastal areas. Results are show for the Sado estuary in Portugal to illustrate model accuracy and potential. Quantitative validation is based on field data (water levels and velocities) while qualitative verification is based on the analysis of secondary flows.

Hydrodynamic model intercomparison for the patos lagoon (Brazil)

An intercomparison study is carried out between two models with different formulations and spatial discretizations in order to overcome the limitations posed by the standard calibration and validation procedures and improve confidence in the hydrodynamic results for the Patos Lagoon. Numerical simulations were carried out applying the TELEMAC and MOHID models, based on the same boundary conditions and identical calibration coefficients so differences in calculated flow conditions result from the formulations and parameterizations of each model. Results from both models are compared with measurements from three stations inside the lagoon. Preliminary results indicate that both models compare well with the measurements and with each other. These results increase the confidence on hydrodynamic results for the Patos Lagoon and provide the first step towards water quality studies for the area.

Hydrodynamic and sediment fluxes through the inlets of the Ria Formosa

Tese de dout., Ciências do Mar, da Terra e do Ambiente (Ciências do Mar-Oceanografia Física), Faculdade de Ciências e Tecnologia, Univ. do Algarve, 2011

Towards a hydrodynamic operational model of the Algarve coast and St. Vincent Cape

This study attempts to implement a hydrodynamic operational model which can ultimately be used for projecting oil spill dispersal patterns and also sewage, pollution and can also be used in wave forecasting. A two layer nested model was created using MOHID Water, which is powerful ocean modelling software. The first layer (father) is used to impose the boundary conditions for the second layer (son). This was repeated for two different wind dominant regimes, Easterly and Westerly winds respectively. A qualitative comparison was done between measured tidal data and the tidal output. Sea surface temperature was also qualitatively compared with the model’s results. The results from both simulations were analysed and compared to historical literature. The comparison was done at the surface layer, 100 metre depth and at 800m depth. In the surface layer the first simulation generated an upwelling event near Cape St. Vincent and within the Algarve. The second simulation generated a non-upwelling event within which the surface was flow reversed and the warm water mass was along the Algarve coastline and evening turning clockwise around Cape St. Vincent. At the 100 metre depth for both simulations, velocity vortexes were observed near Cape St. Vincent travelling northerly and southerly at various instances. At 800metre depth a strong oceanic flow was observed moving north westerly along the continental shelf.

Advanced monitoring of South Portugal water bodies towards WFD

The challenge on implementation of the EU Water Framework Directive (WFD) fosters the development of new monitoring methods and approaches. It is now commonly accepted that the use of classical monitoring campaigns in discrete point is not sufficient to fully assess and describe a water body. Due to this the WFD promote the use of modelling techniques in surface waters to assist all phases of the process, from characterisation and establishment of reference conditions to identification of pressures and assessment of impact. The work presented in this communication is based on these principles. A classical monitoring of the water status of the main transitional water bodies of Algarve (south of Portugal) is combined with advanced in situ water profiling and hydrodynamic, water quality and ecological modelling of the systems to build a complete description of its state. This approach extends spatially and temporally the resolution of the classical point sampling. The methodology was applied during a 12 month program in Ria Formosa coastal lagoon, the Guadiana estuary and the Arade estuary. The synoptic profiling uses an YSI 6600 EDS multi-parameter system attached to a boat and a GPS receiver to produce monthly synoptic maps of the systems. This data extends the discrete point sampling with laboratory analysis performed monthly in several points of each water body. The point sampling is used to calibrate the profiling system and to include variables, such as nutrients, not measured by the sensors. A total of 1427 samplings were performed for physical and chemical parameters, chlorophyll and microbiologic contamination in the water column. This data is used to drive the hydrodynamic, transport and ecological modules of the MOHID water modelling system (www.mohid.com), enabling an integrate description of the water column.

Hydrological modelling of Maranhão and Pracana Basins, a first approach

Modelling the hydrology of hydrographic basins has shown itself as a useful tool in environment management. The hydrological models can be used for multiple purposes: estimate runoff from sequences of rainfall, access stream water quality, quantify the diffuse pollution that reaches water masses such as estuaries, rivers and lakes, etc. This study has as final objective to simulate and analyse the flow, sediment transport and water quality as a function of landuse and soil type in the basins of Maranhão and Pracana. The modelling system used is SWAT, Soil Water Assessment Tool. In this first phase of the study the hydrodynamic calibration of the model was performed using measurements of average daily flows in five stations. The model compares well with the measurements; the annual average flows are similar and the majority of the measured flow peaks coincide with the model peaks.

EU water framework directive: will the nitrate load reduction from diffuse sources produce the same results in all estuaries?

The impact of urban waste-water and non-point nitrate discharges in estuarine and near-shore coastal waters are analyzed. The study is focused on the effects of applying the European directives 91/271/EEC and 91/676/EEC to these systems. 4 Portuguese estuaries and two coastal lagoons with different characteristics are studied. A modelling system is applied and calibrated in each system. Three nitrate load scenarios are examined. It is shown that the morphologic and hydrodynamic characteristics of the domain largely control the ecological processes in these systems. The primary production limitation factors are split into “biologic” and “hydrodynamic” components. The physical limitation due to hydrodynamic and residence time is the most important factor. The combined limitation of “biologic” factors (temperature, light and nutrients availability) control productivity only in the systems where physical limitation is not important.

Hydroinformatics based decision.making integrating modelling, sampling and profiling: the Ria Formosa case

A Waste Water monitoring program aiming to help decision making is presented. The program includes traditional and inboard sensor sampling, hydrodynamic and water quality modeling and a GIS based database to help the decision making of manager authorities. The focus is in the quality of waters receiving discharges from Waste Water Treatment Plants. Data was used to feed model simulations and produce hydrodynamic, effluent dispersion and ecological results. The system was then used to run different scenarios of discharge flow, concentration and location. The results enable to access the current water quality state of the lagoon and are being used as a decision making tool by the waste water managers in the evaluation phase of the treatment plant project to decide the location and the level of treatment of the discharge.

Modelling antropogenic impact on primary production of sado estuary

The assessment of human impact on complex estuarine systems is a multidisciplinary task that is highly demanding in terms of measurements and fieldwork. Nowadays the use of inexpensive and reliably modeling tools can substantially reduce the amount of measurements needed to characterize a system. These tools are also a convenient way to forecast the future evolution of the system and to study the impact of different scenarios of human influence. In this communication a modeling system composed by hydrodynamic, transport and ecological models is used to assess the current trophic state of Sado Estuary (Portugal) and to predict the future trends of the system based on different scenarios of human intervention. Special care is taken to the impact of changing riverine nutrient loads. Sado estuary is a large European estuary that has been considered until now in good trophic conditions with eutrophication appearing only in some isolated spots. Nevertheless in recent years some studies point out that the situation is changing. Sado estuary is a system with strong environmental opposing interests. It hosts a major industrial and urban center around the city of Setúbal and the upper reaches are used to intensive cultures such as rice. On the other hand the estuary possess an important ecological value since it is used by several important species of fish as a spawning and nursery area and it’s wetlands are used by many species of birds as winter shelters. Due to it’s importance the majority of Sado Estuary is considered as Natural Reserve.

Caracterização sedimentar da plataforma interna do sotavento algarvio

Dissertação de Mestrado, Oceanografia, Faculdade de Ciências do Mar e do Ambiente, Universidade do Algarve, 2007

Sediment dynamics and tidal inlet relocation in mixed-energy settings: the case of Ancão inlet (Algarve - Portugal)

Tese de dout., Ciências do Mar, Faculdade de Ciências do Mar e do Ambiente, Univ. do Algarve, 2003

Electrochemical methodology to study labile trace metal/natural organic matter complexation at low concentration levels in natural waters

A new electrochemical methodology to study labile trace metal/natural organic matter complexation at low concentration levels in natural waters is presented. This methodology consists of three steps: (i) an estimation of the complex diffusion coefficient (DML), (ii) determination at low pH of the total metal concentration initially present in the sample, (iii) a metal titration at the desired pH. The free and bound metal concentrations are determined for each point of the titration and modeled with the non-ideal competitive adsorption (NICA-Donnan) model in order to obtain the binding parameters. In this methodology, it is recommended to determine the hydrodynamic transport parameter, α, for each set of hydrodynamic conditions used in the voltammetric measurements. The methodology was tested using two fractions of natural organic matter (NOM) isolated from the Loire river, namely the hydrophobic organic matter (HPO) and the transphilic organic matter (TPI), and a well characterized fulvic acid (Laurentian fulvic acid, LFA). The complex diffusion coefficients obtained at pH 5 were 0.4 ± 0.2 for Pb and Cu/HPO, 1.8 ± 0.2 for Pb/TPI and (0.612 ± 0.009) × 10−10 m2 s−1 for Pb/LFA. NICA-Donnan parameters for lead binding were obtained for the HPO and TPI fractions. The new lead/LFA results were successfully predicted using parameters derived in our previous work.

Influência de plumas de água doce na hidrodinâmica do estuário da Ria de Arousa (NW Espanha), uma abordagem de modelação matemática

Localizada na parte sul da costa da Galiza, a ria de Arousa, tem um interesse particular devido à sua importante indústria de exploração de marisco, especialmente culturas de bivalves. O crescimento, qualidade e mortalidade destes bivalves não só são afetados por possíveis incidentes de poluição, mas também por episódios de grande run-off, que podem produzir decréscimos sazonais significativos de salinidade. Neste contexto, a presente dissertação pretende contribuir para uma melhor compreensão de como as plumas de água doce provenientes dos rios vão influenciar os gradientes de salinidade e temperatura no estuário da ria de Arousa. O objetivo é proceder a uma melhoria da previsão hidrodinâmica do modelo operacional oceanográfico desta ria, que é executado diariamente pela MeteoGalicia. Para atingir esse objectivo executaram-se simulações numéricas para diferentes cenários de forçamento. Foram escolhidos dois períodos com diferentes condições meteorológicas: um período de inverno, coincidindo com chuvas fortes e um período de verão, coincidindo com a ausência de precipitação. Foi aplicado o modelo hidrodinâmico MOHID (Hydrodynamic Model) para simular os processos físicos da ria de Arousa, utilizando a metodologia de modelos encaixados. O forçamento para a superfície foi imposto através do modelo atmosférico WRF (Weather Regional Forecast), que fornece as variáveis meteorológicas necessárias. Para fronteira terra, uma ferramenta hidrológica foi implementada, o modelo SWAT (Soil water Assessment Tool), este providencia as descargas de água doce para os principais rios da região. É feita neste trabalho uma descrição da implementação deste sistema, assim como a caracterização da área de estudo. Os resultados do modelo foram comparados com medidas provenientes de bóias oceanográficas e perfis de CTDs (Conductivity-Temperature-Depth instrument) em diferentes localizações.