Electrical characterization of the rectifying contact between aluminium and electrodeposited poly(3-methylthiophene)

A detailed investigation both of the DC and of the AC electrical properties of the Schottky barrier formed between aluminium and electrodeposited poly(3-methylthiophene) is reported. The devices show rectification ratios up to 2 x 10(4) which can be increased further after post-metal annealing. The reverse characteristics of the devices follow predictions based on the image-force lowering of the Schottky barrier, from which the doping density can be estimated, As the forward voltage increases, the device current is limited by the bulk resistance of the polymer with some evidence for injection limitation at the gold counter-electrode at high bias. In the bulk-limited regime, the device current is thermally activated near room temperature with an activation energy in the range 0.2-0.3 eV. Below about 150 K the device current is almost independent of temperature. Capacitance-voltage plots obtained at frequencies well below the device relaxation frequency indicate the presence of two distinct acceptor states, A set of shallow acceptor states are active in forward bias and are believed to determine the bulk conductivity of the polymer. A set of deeper accepters are active only for very small forward voltages and for all reverse voltages, namely when band banding causes the Fermi energy to cross these states. The density of these deeper states is approximately an order of magnitude greater than that of the shallow states. Evidence is presented also for the influence of fabrication conditions on the formation of an insulating interfacial layer at the rectifying interface. The presence of such a layer leads to inversion at the polymer surface and a modification of the I-V characteristics.

Investigation of electron acceptor states in poly(3-methylthiophene)

Both the DC and AC admittance of Schottky barrier diodes formed at the interface of aluminium and poly(3-methyl thiophene) have been investigated in some detail. The capacitance-voltage plots for the devices suggest the presence of two acceptor states, one shallow and one deep. The total concentration of acceptor states, 10 24-10 26 m -3 depending on the degree of undoping, agrees well with estimates from the reverse I-V characteristics assuming image force lowering of the interfacial potential barrier.

Age, growth and reproduction of the Axilary Seabream, "Pagellus acarne" (Risso, 1827), from the South coast of Portugal

Axillary seabream, Pagellus acarne, caught by longlines in the Algarve (Southern Portugal), were sampled between August 1995 and August 1996. Age was studied by counting growth increments on otoliths and the estimated von Bertalanffy parameters were Linf = 28.82 cm, K = 0.29 year-1 and t0 = -1.47 year for males and Linf = 32.30 cm, K = 0.18 year-1 and t0 = -2.56 year for females. Evidence of the annual periodicity of the deposition of increments was found by marginal increment analyses. Macroscopic analysis of the gonads and the gonad somatic index showed that reproduction occurred over an extensive period of time, from May to November. Lengths at first maturity were 18.10 and 17.60 cm for males and females, respectively. This species was characterized as being a protandric hermaphrodite.