Connectivity patterns and early life history of the black-faced blenny Tripterygion delaisi (Cadenat and Blache, 1970)

Tese de doutoramento, Ciências do Mar, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015

Electrical characterization of the rectifying contact between aluminium and electrodeposited poly(3-methylthiophene)

A detailed investigation both of the DC and of the AC electrical properties of the Schottky barrier formed between aluminium and electrodeposited poly(3-methylthiophene) is reported. The devices show rectification ratios up to 2 x 10(4) which can be increased further after post-metal annealing. The reverse characteristics of the devices follow predictions based on the image-force lowering of the Schottky barrier, from which the doping density can be estimated, As the forward voltage increases, the device current is limited by the bulk resistance of the polymer with some evidence for injection limitation at the gold counter-electrode at high bias. In the bulk-limited regime, the device current is thermally activated near room temperature with an activation energy in the range 0.2-0.3 eV. Below about 150 K the device current is almost independent of temperature. Capacitance-voltage plots obtained at frequencies well below the device relaxation frequency indicate the presence of two distinct acceptor states, A set of shallow acceptor states are active in forward bias and are believed to determine the bulk conductivity of the polymer. A set of deeper accepters are active only for very small forward voltages and for all reverse voltages, namely when band banding causes the Fermi energy to cross these states. The density of these deeper states is approximately an order of magnitude greater than that of the shallow states. Evidence is presented also for the influence of fabrication conditions on the formation of an insulating interfacial layer at the rectifying interface. The presence of such a layer leads to inversion at the polymer surface and a modification of the I-V characteristics.

Trophic food web and ecosystem attributes of a water reservoir of the Ria Formosa (south Portugal)

Using a top-down modelling approach, a balanced trophic food web model of a water reservoir of the Ria Formosa lagoonal system was constructed. Few adjustments of input data were necessary to run the model since most of the parameters were estimated at the study site and the characteristics of the water reservoir allowed a high degree of control and precision in terms of sampling and data collection. Trophic levels of the 14 compartments included in the model varied between 1.0 for primary producers and detritus to 3.4 for carnivorous fish and the 14 groups were aggregated in a food chain with six trophic levels. The water reservoir has a detritus based food chain, with the majority of the biomass concentrated in the first two levels, the producers level and the herbivore/detritivore level (97.6%). The transfer efficiencies were low, and decreased with increasing level number, varying between 6.0 and 0.2%. The degree of "ecosystem maturity" was difficult to establish, but several parameters indicate that it could be high. The water reservoir studied, which has similar environmental and ecological characteristics as the Ria Formosa lagoon. is near its carrying capacity. (C) 2004, Elsevier B.V. All rights reserved.