Entre o olhar e o gesto, elementos para uma poética da imagem animada

O que é a animação? O que é o cinema? Qual é a relação entre ambos? Este livro busca responder a essas perguntas e ao mesmo tempo construir uma estrutura concetual para a interpretação do filme animado.

Understanding the importance of sediments to water ouality in coastal shallow lagoons

The undesirable enrichment of water by nutrients may be a problem, especially in areas with restricted exchange with the sea. The tidal regime flushes the system and contributes for the removal of phytoplankton, favouring phytobenthos as the target of enhanced nutrients. Water samples were collected during the years of 2006 and 2007-08 for nutrients, chlorophyll a and dissolved oxygen. Sediment sample s were also collected for pore water nutrients and benthic chlorophyll a. From comparison with previous work, a decrease in the nitrogen concentration in the water column can be pointed out, which may indicate an improvement of the water quality. Pore water DAIN represents approximately 75% of the total DAIN of the whole lagoon. Benthic chlorophyll a concentrations were much larger than in the water column, representing around 99% of the total chlorophyll existent in the lagoon. Benthic microalgae play a relevant role in this system and therefore standard monitoring programs of the WFD, which do not consider this component, may fail to track nutrient-driven changes in primary producers. Dissolved oxygen concentration could be near critical levels during the summer (early in the morning), especially in the inner channels.

Water framework directive implementation: intercalibration exercise for biological quality elements: a case study for the south coast of Portugal

This work summarises the Intercalibration Exercise (IE) required for the Common Implementation Strategy of the Water Framework Directive (WFD; 2000/60/EC) that was carried out in Portugal, and applied to a coastal region. The WFD aims to achieve good ec ological status for all waters in the European Community by 2015. The Ecological Status of a water body is determined us ing a range of Hydromorphological and Physico-Chemical Quality Elements as well Biological Quality Elements (BQE ). In coastal waters, the Biological Elements include Phytoplankton, Other Aquatic Flora and Benthic Inverteb rate Fauna. Good cooperation with the other Member States allowed the IE to proceed without a complete da ta set, and Portugal was ab le to intercalibrate and harmonise methods within the North Ea st Atlantic Geographica l Intercalibration Group for most of the BQE. The appropriate metrics and corre sponding methods were agreed under the framework of the RECITAL (Reference Conditions and Intercalibra tion) project, funded by the Port uguese Water Institu te, INAG. Some preliminary sampling was undertaken, but not su fficient to establish the Reference Conditions. The study area was a coastal lagoon in the southern part of Portugal. The focus was on the Phytoplankton Quality Element, but other BQE were also taken into account. Two sampli ng stations in Ria Formosa coastal lagoon were considered in this exercise: Ramalhete a nd Ponte. The metrics adopted by the Intercalibration Exercise groups were applied enabli ng the classification for the two sta tions of Good/High Status for the majority of the BQE parameters.

Methods to improve creativity and innovation: the effectiveness of creative problem solving

This chapter focuses on the development of organizational creativity, using the CPS methodology, aiming at demonstrating its effectiveness in using the individual and team divergent thinking improvement in identifying organizational problems. A study was undertaken using problem solving teams in seven companies, in which each individual was submitted to a pre-post test in attitudes towards divergent thinking and asked to express the evaluation of the method. All the information reported in the sessions was recorded. The results indicate a change in attitude favourable to divergent thinking, the provision of a professional, efficient method of organizing knowledge in such a way that can help individuals to find original solutions to problems, and an important way to lead teams to creativity and innovation, according with companies different orientations.

Environmental impacts on soil and groundwater at airports: origin, contaminants of concern and environmental risks

Environmental impacts of airports are similar to those of many industries, though their operations expand over a very large area. Most international impact assessment studies and environmental management programmes have been giving less focus on the impacts to soil and groundwater than desirable. This may be the result of the large attention given to air and noise pollution, relegating other environmental descriptors to a second role, even when the first are comparatively less relevant. One reason that contributes to such ‘‘biased’’ evaluation is the lack of systematic information about impacts to soil and groundwater from airport activities, something the present study intends to help correct. Results presented here include the review of over seven hundred documents and online databases, with the objective of obtaining the following information to support environmental studies: (i) which operations are responsible for chemical releases?; (ii) where are these releases located?; (iii) which contaminants of concern are released?; (iv) what are the associated environmental risks? Results showed that the main impacts occur as a result of fuel storage, stormwater runoff and drainage systems, fuel hydrant systems, fuel transport and refuelling, atmospheric deposition, rescue and fire fighting training areas, winter operations, electrical substations, storage of chemical products by airport owners or tenants, and maintenance of green areas. A new method for ranking environmental risks of organic substances, based on chemical properties, is proposed and applied. Results show that the contaminants with the highest risks are the perfluorochemicals, benzene, trichloroethylene and CCl4.

Qualidade em radiologia: análise da percepção da qualidade e satisfação em dois serviços de radiologia distintos, segundo os utentes da consulta externa

A elaboração deste trabalho deveu-se à necessidade de avaliar a qualidade percebida e a satisfação dos utentes/doentes de dois serviços de Radiologia distintos, sendo um deles certificados pelas normas ISO 9001:2000 e outro não certificado. O principal objectivo consistiu em avaliar o desempenho desses serviços de Radiologia e verificar se, na prática, um serviço com o sistema de gestão da qualidade (SGQ) implementado, se traduzia numa maior qualidade e satisfação dos serviços prestados, na perspectiva dos utentes/doentes. É um estudo quantitativo de natureza comparativa e descritivo-correlacional e a metodologia utilizada teve por base um questionário dirigido aos utentes da Consulta Externa baseado numa escala SERVPERF modificada - um instrumento usado para medir a qualidade dos serviços na perspectiva dos utilizadores, baseado nas dimensões dos atributos da qualidade. Os resultados obtidos não confirmaram as dimensões originais da escala SERVPERF, sendo que a qualidade dos serviços de Radiologia foi explicada com base em 5 de 6 novas dimensões. De relevar que os níveis de percepção da Qualidade e da Satisfação, em termos gerais, dos serviços estudados, apresentam-se mais influenciadas pelos atributos relacionados com a “Atenção personalizada em termos gerais” e com as situações de ausência de “Rigor do Serviço de Radiologia”, nos aspectos formais e informais. Não foram encontradas diferenças significativas nos níveis de percepção entre os dois hospitais pelo que se pode concluir que a implementação de um SGQ, não se traduziu num aumento da qualidade e satisfação dos utentes.

Ultralow voltage resonant tunnelling diode electroabsorption modulator

Embedding a double barrier resonant tunnelling diode (RTD) in a unipolar InGaAlAs optical waveguide gives rise to a very low driving voltage electroabsorption modulator (EAM) at optical wavelengths around 1550 nm. The presence of the RTD within the waveguide core introduces high non- linearity and negative di erential resistance in the current±voltage (I±V) characteristic of the waveguide. This makes the electric ®eld distribution across the waveguide core strongly dependent on the bias voltage: when the current decreases from the peak to the valley, there is an increase of the electric ®eld across the depleted core. The electric ®eld enhancement in the core-depleted layer causes the Franz±Keldysh absorption band-edge to red shift, which is responsible for the electroabsorption e ect. High-frequency ac signals as low as 100mV can induce electric ®eld high-speed switching, producing substantial light modulation (up to 15 dB) at photon energies slightly lower than the waveguide core band-gap energy. The key di erence between this device and conventional p-i-n EAMs is that the tunnelling characteristics of the RTD are employed to switch the electric ®eld across the core-depleted region; the RTD- EAM has in essence an integrated electronic ampli®er and, therefore, requires considerably less switching power.

Electric field switching in a resonant tunneling diode electroabsorption modulator

The basic mechanism underlying electric field switching produced by a resonant tunneling diode (RTD) is analyzed and the theory compared with experimental results; agreement to within 12% is achieved. The electroabsorption modulator (EAM) device potential of this effect is explored in an optical waveguide configuration. It is shown that a RTD-EAM can provide significant absorption coefficient change, via the Franz– Keldysh effect, at appropriate optical communication wavelengths around 1550 nm and can achieve up to 28-dB optical modulation in a 200- m active length device. The advantage of the RTD-EAM over the conventional reverse-biased p–n junction EAM, is that the RTD-EAM has, in essence, an integrated electronic amplifier and, therefore, requires considerably less switching power.

Molecular genetic analysis of a cattle population to reconstitute the extinct Algarvia breed

Background: Decisions to initiate conservation programmes need to account for extant variability, diversity loss and cultural and economic aspects. Molecular markers were used to investigate if putative Algarvia animals could be identified for use as progenitors in a breeding programme to recover this nearly extinct breed. Methods: 46 individuals phenotypically representative of Algarvia cattle were genotyped for 27 microsatellite loci and compared with 11 Portuguese autochthonous and three imported breeds. Genetic distances and factorial correspondence analyses (FCA) were performed to investigate the relationship among Algarvia and related breeds. Assignment tests were done to identify representative individuals of the breed. Y chromosome and mtDNA analyses were used to further characterize Algarvia animals. Gene- and allelic-based conservation analyses were used to determine breed contributions to overall genetic diversity. Results: Genetic distance and FCA results confirmed the close relationship between Algarvia and southern Portuguese breeds. Assignment tests without breed information classified 17 Algarvia animals in this cluster with a high probability (q > 0.95). With breed information, 30 cows and three bulls were identified (q > 0.95) that could be used to reconstitute the Algarvia breed. Molecular and morphological results were concordant. These animals showed intermediate levels of genetic diversity (MNA = 6.0 ± 1.6, Rt = 5.7 ± 1.4, Ho = 0.63 ± 0.19 and He = 0.69 ± 0.10) relative to other Portuguese breeds. Evidence of inbreeding was also detected (Fis = 0.083, P < 0.001). The four Algarvia bulls had Y-haplotypes H6Y2 and H11Y2, common in Portuguese cattle. The mtDNA composition showed prevalence of T3 matrilines and presence of the African-derived T1a haplogroup. This analysis confirmed the genetic proximity of Algarvia and Garvonesa breeds (Fst = 0.028, P > 0.05). Algarvia cattle provide an intermediate contribution (CB = 6.18, CW = -0.06 and D1 = 0.50) to the overall gene diversity of Portuguese cattle. Algarvia and seven other autochthonous breeds made no contribution to the overall allelic diversity. Conclusions: Molecular analyses complemented previous morphological findings to identify 33 animals that can be considered remnants of the Algarvia breed. Results of genetic diversity and conservation analyses provide objective information to establish a management program to reconstitute the Algarvia breed.

Identification of descendants of an extinct bovine population from the Algarve region of Portugal using numerical taxonomy analysis of morphological traits

The morphology of a sample of four bulls and 43 cows, presumed to be descendants of the extinct cattle breed ‘Algarvia’ (AG), was used to assign their relationship with animals from other Portuguese autochthonous breeds – Arouquesa (AR), Barrosa˜ (BA), Cachena (CA), Marinhoa (MA), Maronesa (MO), Minhota (MN), Mirandesa (MI), (only bulls), Alentejana (AL), Garvonesa (GA), Mertolenga (ME) and Preta (PR). Standard numerical taxonomic methods were applied to a set of 183 (cows) and 170 (bulls) traits, to derive average pairwise taxonomic distances among the sample of 257 cows and 76 bulls. Distance coefficients (morphological index of distance) ranged from 0.22 to 2.62 (cows) and from 0.49 to 2.13 (bulls). Unweighted pair group method using arithmetic averages (UPGMA)-based phenograms and a principal coordinate analysis showed that bulls were highly clustered and cows showed a tendency to cluster according to their geographical and breed origin. The AG population grouped together with GA, AL, ME and MN breeds in the Red Convex group. The average taxonomic distance among breeds was 1.02, the highest being 1.39 (ME versus BA) and the lowest being 0.64 (MA versus AR). The approach allowed for the identification of a phenotypically differentiated set of animals, comprising 19 cows and four bulls representative of the AG breed, and which can be targeted in further studies aiming at the recovery of this extinct breed.

Analysis of genetic diversity in Portuguese Ceratonia siliqua L. cultivars using RAPD and AFLP markers

Although carob (Ceratonia siliqua L.) is of great economic importance little is still known about the pattern of genetic variation within this species. Morphological characteristics based on 31 fruit and seeds of continuous characters determinant for agro-industrial uses, were compared with RAPD and AFLP markers for assessing genetic distances in 68 accessions of carob trees, from different cultivars, varieties and eco-geographic regions of Algarve. Eighteen selected RAPD primers applied to the 68 accessions produced a total of 235 fragments ranging from 200 to 2000 bp, of which 93 (40%) were polymorphic. Four AFLP selective primer combinations generated a total of 346 amplification fragments of which 110 were polymorphic. The average level of polymorphism based on four primer combinations was 31.8%. The phenetic trees based on RAPD and AFLP analyses gave high co-phenetic correlation values, and were found to be consistent in general with the analysis of morphological data, carried out on the same accessions. A number of RAPD and AFLP markers were found to be diagnostic for ‘Canela’ cultivar and 13 wild ungrafted trees.

Evaluation of fruit and seed diversity and characterization of carob (Ceratonia siliqua L.) cultivars in Algarve region

The genetic diversity of 15 carob ( Ceratonia siliqua L.) cultivars located in an experimental field from Algarve (Portugal) was evaluated over 7 years using 12 fruit and seed phenotypic characters, in order to characterize carob cultivars. The values of morphological traits obtained by cultiv ar were compared with those from other countries of the Mediterranean basin. Statistically significant differences were found between cultivars for al l characters which were examined, what indicates a high genetic diversity. The relationship among these characters was analyzed by principal component analysis (PCA) resulting in the separation of these cultivars classed in four groups (clusters I–IV) and in four ungrouped cultivars. A three dimension of the model was found to be significant and explained 74.5% of the total variation, in which the first component accounting for 34.6% of the total variation is dominated by fruit characters, while the second component is dominated by seed characters. Cultivars plotted on the left-lower quadrant on the space determined by principal components 1 and 2 are characterized by fruits with high seed yield more appropriated for industrial rentability. The correlation analyses established by cultivar provided a specific understanding about the way how fruit and seed characteristics correlate within each cultivar. This approach can be useful for the development of a breeding programme, aiming to increase the seed yield, seed thickness, individual and total seed weight by fruit, characteristics that are determinant to improve the industrial exploitation of carob.

Controlo do desenvolvimento e de acidentes fisiológicos do fruto, em tangerineiras

Tese de dout., Ciências Agrárias, Faculdade de Engenharia e de Recursos Naturais, Univ. do Algarve, 2002

Alguns temas para a interpretação dos assentamentos rurais no sul de Portugal

As diferentes perspectivas com que, no presente, entendemos o Ordenamento do Território acabam por reintroduzir, de forma mais ou menos consciente, os assentamentos rurais tradicionais enquanto tema fulcral para a definição de novos modelos de organização territorial.

Patient´s knowledge about radiation and radiological protection

Purpose: To obtain and analyse patient´s knowledge and perceptions regarding radiation exposure, from both natural and man-made radiation of medical procedures and interventions. Verify if patients worry about their exposure when undergoing medical exams, are aware of associated risks and means of radiological protection and if their knowledge on medical radiation exposure affects their own decisions. Methods and Materials: On a medical environment a self-applied questionnaire was used as instrument and assigned to patients who would undergo medical imaging exams involving ionising radiation. A total of 300 valid questionnaires were interpreted and statistically analysed through descriptive statistics and Phi & Cramer´s V correlation tests. Results: 44.3% of patients believe most of their exposure derives from electronic appliances and 25% from medical imaging exams, while patient´s with higher education levels tend to consider is comes from the environment. The great majority of patients (95%) consider that only certified personnel should operate medical imaging equipment, but 74% never ask for their qualifications. 66.3% of patients claim that Technologists have more education on radiological protection and about 60% of patients rarely or never worry about radiation exposure when undergoing medical imaging exams. Conclusion: Patients overestimate the risks of industrial radiation exposure while they underestimate the associated risks of medical radiation exposure and the Technologist´s ability to reduce the inherent radiation exposure of medical imaging exams. Patient´s knowledge on radiation and radiological protection is based more on perceptions and beliefs, rather than factual knowledge.