Seismic retrofitting of RC buildings using CFRP and post-tensioned metal straps: shake table tests

This article examines the effectiveness of two innovative retrofitting solutions at enhancing the seismic behaviour of a substandard reinforced concrete building tested on a shake table as part of the Pan-European funded project BANDIT. To simulate typical substandard construction, the reinforcement of columns and beam-column joints of the full-scale structure had inadequate detailing. An initial series of shake table tests were carried out to assess the seismic behaviour of the bare building and the effectiveness of a first retrofitting intervention using Post-Tensioned Metal Straps. After these tests, columns and joints were repaired and subsequently retrofitted using a retrofitting solution consisting of Carbon Fibre Reinforced Polymers and Post-Tensioned Metal Straps applied on opposite frames of the building. The building was then subjected to unidirectional and three-dimensional incremental seismic excitations to assess the effectiveness of the two retrofitting solutions at improving the global and local building performance. The article provides details of the above shake table testing programme and retrofitting solutions, and discusses the test results in terms of the observed damage, global damage indexes, performance levels and local strains. It is shown that whilst the original bare building was significantly damaged at a peak ground acceleration (PGA) of 0.15g, the retrofitted building resisted severe threedimensional shake table tests up to PGA=0.60g without failure. Moreover, the retrofitting intervention enhanced the interstorey drift ratio capacity of the 1st and 2nd floors by 160% and 110%, respectively. Therefore, the proposed dual retrofitting system is proven to be very effective for improving the seismic performance of substandard buildings.

The Educational and Employment Aspirations of Adolescents from Areas of High Deprivation in London

Adolescents from areas of high deprivation are often assumed to have low aspirations for the future. However, recent research has suggested otherwise and there have been calls for more substantial investigation into the relationship between poverty and aspiration. This article reports levels and variation in aspiration from 1,214 adolescents (49.5% male; 50.5% female) living in areas of high deprivation across 20 London boroughs. A strength of this study is our large and diverse population of low socio-economic status (SES) adolescents, comprising of white British (22%), black African (21%), black Caribbean (9%), Indian/Pakistani/Bangladeshi/Other Asian (24%), mixed ethnicity (9%), and 15% defining themselves as Other. Our measures indicated a high group level of reported aspiration with notable variations. Females reported higher educational (but not occupational) aspirations than males; white British students reported lower educational and occupational aspirations than other ethnic groups; and black African children reported the highest educational aspirations. Perceived parental support for education had the largest positive association with aspirations. In contrast to previous findings from studies carried out in the United States, aspirations were found to be negatively associated with perceptions of school and school peer environment. These measures explored feelings of safety, happiness and belonging within the school environment and school peer group. We discuss possible explanations for this unexpected finding within our population of adolescents from UK state schools and how it might affect future policy interventions. This study makes an important contribution to the literature on adolescent aspirations because of the unique nature of the data sample and the multiple domains of functioning and aspiration measured.

Full-Scale Shaking Table Tests on a Substandard RC Building Repaired and Strengthened with Post-Tensioned Metal Straps

The effectiveness of a novel Post-Tensioned Metal Strapping (PTMS) technique at enhancing the seismic behaviour of a substandard RC building was investigated through full-scale shake-table tests during the EU-funded project BANDIT. The building had inadequate reinforcement detailing in columns and joints to replicate old construction practices. After the bare building was initially damaged significantly, it was repaired and strengthened with PTMS to perform additional seismic tests. The PTMS technique improved considerably the seismic performance of the tested building. Whilst the bare building experienced critical damage at an earthquake of PGA=0.15g, the PTMS-strengthened building sustained a PGA=0.35g earthquake without compromising stability.