Exergetic, energetic, economic and environmental evaluation of concentrated solar power plants in Libya

The PhD project addresses the potential of using concentrating solar power (CSP) plants as a viable alternative energy producing system in Libya. Exergetic, energetic, economic and environmental analyses are carried out for a particular type of CSP plants. The study, although it aims a particular type of CSP plant – 50 MW parabolic trough-CSP plant, it is sufficiently general to be applied to other configurations. The novelty of the study, in addition to modeling and analyzing the selected configuration, lies in the use of a state-of-the-art exergetic analysis combined with the Life Cycle Assessment (LCA). The modeling and simulation of the plant is carried out in chapter three and they are conducted into two parts, namely: power cycle and solar field. The computer model developed for the analysis of the plant is based on algebraic equations describing the power cycle and the solar field. The model was solved using the Engineering Equation Solver (EES) software; and is designed to define the properties at each state point of the plant and then, sequentially, to determine energy, efficiency and irreversibility for each component. The developed model has the potential of using in the preliminary design of CSPs and, in particular, for the configuration of the solar field based on existing commercial plants. Moreover, it has the ability of analyzing the energetic, economic and environmental feasibility of using CSPs in different regions of the world, which is illustrated for the Libyan region in this study. The overall feasibility scenario is completed through an hourly analysis on an annual basis in chapter Four. This analysis allows the comparison of different systems and, eventually, a particular selection, and it includes both the economic and energetic components using the “greenius” software. The analysis also examined the impact of project financing and incentives on the cost of energy. The main technological finding of this analysis is higher performance and lower levelized cost of electricity (LCE) for Libya as compared to Southern Europe (Spain). Therefore, Libya has the potential of becoming attractive for the establishment of CSPs in its territory and, in this way, to facilitate the target of several European initiatives that aim to import electricity generated by renewable sources from North African and Middle East countries. The analysis is presented a brief review of the current cost of energy and the potential of reducing the cost from parabolic trough- CSP plant. Exergetic and environmental life cycle assessment analyses are conducted for the selected plant in chapter Five; the objectives are 1) to assess the environmental impact and cost, in terms of exergy of the life cycle of the plant; 2) to find out the points of weakness in terms of irreversibility of the process; and 3) to verify whether solar power plants can reduce environmental impact and the cost of electricity generation by comparing them with fossil fuel plants, in particular, Natural Gas Combined Cycle (NGCC) plant and oil thermal power plant. The analysis also targets a thermoeconomic analysis using the specific exergy costing (SPECO) method to evaluate the level of the cost caused by exergy destruction. The main technological findings are that the most important contribution impact lies with the solar field, which reports a value of 79%; and the materials with the vi highest impact are: steel (47%), molten salt (25%) and synthetic oil (21%). The “Human Health” damage category presents the highest impact (69%) followed by the “Resource” damage category (24%). In addition, the highest exergy demand is linked to the steel (47%); and there is a considerable exergetic demand related to the molten salt and synthetic oil with values of 25% and 19%, respectively. Finally, in the comparison with fossil fuel power plants (NGCC and Oil), the CSP plant presents the lowest environmental impact, while the worst environmental performance is reported to the oil power plant followed by NGCC plant. The solar field presents the largest value of cost rate, where the boiler is a component with the highest cost rate among the power cycle components. The thermal storage allows the CSP plants to overcome solar irradiation transients, to respond to electricity demand independent of weather conditions, and to extend electricity production beyond the availability of daylight. Numerical analysis of the thermal transient response of a thermocline storage tank is carried out for the charging phase. The system of equations describing the numerical model is solved by using time-implicit and space-backward finite differences and which encoded within the Matlab environment. The analysis presented the following findings: the predictions agree well with the experiments for the time evolution of the thermocline region, particularly for the regions away from the top-inlet. The deviations observed in the near-region of the inlet are most likely due to the high-level of turbulence in this region due to the localized level of mixing resulting; a simple analytical model to take into consideration this increased turbulence level was developed and it leads to some improvement of the predictions; this approach requires practically no additional computational effort and it relates the effective thermal diffusivity to the mean effective velocity of the fluid at each particular height of the system. Altogether the study indicates that the selected parabolic trough-CSP plant has the edge over alternative competing technologies for locations where DNI is high and where land usage is not an issue, such as the shoreline of Libya.

Evolution and functional relevance of Ataxin-3 paralogues

O gene ataxin-3 (ATXN3; 14q32.1) codifica uma proteína expressa ubiquamente, envolvida na via ubiquitina-proteassoma e na repressão da transcrição. Grande relevância tem sido dada ao gene ATXN3 após a identificação de uma expansão (CAG)n na sua região codificante, responsável pela ataxia mais comum em todo o mundo, SCA3 ou doença de Machado-Joseph (DMJ). A DMJ é uma doença neurodegenerativa, autossómica dominante, de início tardio. O tamanho do alelo expandido explica apenas uma parte do pleomorfismo da doença, evidenciando a importância do estudo de outros modificadores. Em doenças de poliglutaminas (poliQ), a toxicidade é causada por um ganho de função da proteína expandida; no entanto, a proteína normal parece ser, também, um dos agentes modificadores da patogénese. O gene ATXN3 possui dois parálogos humanos gerados por retrotransposição: ataxin-3 like (ATXN3L) no cromossoma X, e LOC100132280, ainda não caracterizado, no cromossoma 8. Estudos in vitro evidenciaram a capacidade da ATXN3L para clivar cadeias de ubiquitina, sendo o seu domínio proteolítico mais eficiente do que o domínio da ATXN3 parental. O objetivo deste estudo foi explorar a origem e a evolução das retrocópias ATXN3L e LOC100132280 (aqui denominadas ATXN3L1 e ATXN3L2), assim como testar a relevância funcional de ambas através de abordagens evolutivas e funcionais. Deste modo, para estudar a divergência evolutiva dos páralogos do gene ATXN3: 1) analisaram-se as suas filogenias e estimou-se a data de origem dos eventos de retrotransposição; 2) avaliaram-se as pressões seletivas a que têm sido sujeitos os três parálogos, ao longo da evolução dos primatas; e 3) explorou-se a evolução das repetições CAG, localizadas em três contextos genómicos diferentes, provavelmente sujeitos a diferentes pressões seletivas. Finalmente, para o retrogene que conserva uma open reading frame (ORF) intacta, ATXN3L1, analisou-se, in silico, a conservação dos locais e domínios proteicos da putativa proteína. Ademais, para este retrogene, foi estudado o padrão de expressão de mRNA, através da realização de PCR de Transcriptase Reversa, em 16 tecidos humanos. Os resultados obtidos sugerem que dois eventos independentes de retrotransposição estiveram na origem dos retrogenes ATXN3L1 e ATXN3L2, tendo o primeiro ocorrido há cerca de 63 milhões de anos (Ma) e o segundo após a divisão Platirrínios-Catarrínios, há cerca de 35 Ma. Adicionalmente, outras retrocópias foram encontradas em primatas e outros mamíferos, correspondendo, no entanto, a eventos mais recentes e independentes de retrotransposição. A abordagem evolutiva mostrou a existência de algumas constrições selectivas associadas à evolução do gene ATXN3L1, à semelhança do que acontece com ATXN3. Por outro lado, ATXN3L2 adquiriu codões stop prematuros que, muito provavelmente, o tornaram num pseudogene processado. Os resultados da análise de expressão mostraram que o gene ATXN3L1 é transcrito, pelo menos, em testículo humano; no entanto, a optimização final da amplificação específica dos transcriptos ATXN3L1 permitirá confirmar se a expressão se estende a outros tecidos. Relativamente ao mecanismo de mutação inerente à repetição CAG, os dois parálogos mostraram diferentes padrões de evolução: a retrocópia ATXN3L1 é altamente interrompida e pouco polimórfica, enquanto a ATXN3L2 apresenta tratos puros de (CAG)n em algumas espécies e tratos hexanucleotídicos de CGGCAG no homem e no chimpanzé. A recente aquisição da repetição CGGCAG pode ter resultado de uma mutação inicial de CAG para CGG, seguida de instabilidade que proporcionou a expansão dos hexanucleótidos.Estudos futuros poderão ser realizados no sentido de confirmar o padrão de expressão do gene ATXN3L1 e de detetar proteína endógena in vivo. Adicionalmente, a caracterização da proteina ataxina-3 like 1 e dos seus interatores moleculares poderá povidenciar informação acerca da sua relevância no estado normal e patológico.