Estudo de sistemas de protecção térmica húmidos sujeitos a condições de incêndio

O presente trabalho tem como principal objectivo o estudo e a interpretação dos mecanismos de transferência de calor e massa no interior de um meio poroso húmido actuando como barreira térmica de protecção em condições de incêndio, visando, sobretudo, melhorar o desempenho destes sistemas. A barreira térmica estudada é constituída por camadas de fibra de vidro, cuja face exposta à chama é protegida por uma folha de alumínio perfurada. A realização deste estudo envolveu a concepção, realização e operação de uma montagem experimental, com a qual se obteve a evolução temporal da temperatura e da taxa de evaporação de água no interior de uma amostra da barreira térmica, submetida à acção directa de uma chama. A análise do processo de protecção foi complementada com resultados obtidos por simulação numérica do processo, designadamente a evolução das propriedades térmicas, que determinam os mecanismos de transferência de calor e massa no interior da barreira. Para esse efeito foi desenvolvido um modelo matemático de simulação do processo de protecção para as barreiras em estudo, que permitiu obter resultados que acompanham bem as evoluções verificadas nos ensaios experimentais. A barreira térmica estudada mostrou claramente possuir um bom desempenho no processo de protecção, face às barreiras térmicas secas. Com a realização deste estudo identificaram-se e quantificaram-se os mecanismos de transferência de calor e massa dominantes nas diversas fases do processo de protecção, o que permitiu extrair conclusões valiosas quanto às características dos meios porosos que contribuem para o seu bom desempenho como barreiras térmicas húmidas.

Laser assisted directional solidification of zirconia-based eutectics

Directionally solidified zirconia-based eutectic (DSE) fibres were obtained using the laser floating zone (LFZ) method. Two systems were investigated: zirconia-barium zirconate and zirconia-mullite. The purpose was to take advantage of zirconia properties, particularly as an ionic conductor and a mechanical rein-forcement phase. The influence of processing conditions in the structural and microstructural characteristics and their consequences on the electrical and mechanical behaviour were the focus of this thesis. The novel zirconia-barium zirconate eutectic materials were developed in order to combine oxygen ionic conduction through zirconia with protonic conduction from barium zirconate, promoting mixed ionic conduction behaviour. The mi-crostructure of the fibres comprises two alternated regions: bands having coarser zirconia-rich microstructure; and inter-band regions changing from a homogeneous coupled eutectic, at the lowest pulling rate, to columnar colony microstructure, for the faster grown fibres. The bands inter-distance increases with the growth rate and, at 300 mm/h, zirconia dendrites develop enclosed in a fine-interpenetrated network of 50 vol.% ZrO2-50 vol.% BaZrO3. Both phases display contiguity without interphase boundaries, according to impedance spec-troscopy data. Yttria-rich compositions were considered in order to promote the yttrium incorporation in both phases, as revealed by Raman spectroscopy and corroborated by the elemental chemical analysis in energy dispersive spectros-copy. This is a mandatory condition to attain simultaneous contribution to the mixed ionic conduction. Such results are supported by impedance spectrosco-py measurements, which clearly disclose an increase of total ionic conduction for lower temperatures in wet/reduction atmospheres (activation energies of 35 kJ/mol in N2+H2 and 48 kJ/mol in air, in the range of 320-500 ºC) compared to the dry/oxidizing conditions (attaining values close to 90 kJ/mol, above 500 ºC). At high temperatures, the proton incorporation into the barium zirconate is un-favourable, so oxygen ion conduction through zirconia prevails, in dry and oxi-dizing environments, reaching a maximum of 1.3x10-2 S/cm in dry air, at ~1000 ºC. The ionic conduction of zirconia was alternatively combined with another high temperature oxygen ion conductor, as mullite, in order to obtain a broad elec-trolytic domain. The growth rate has a huge influence in the amount of phases and microstructure of the directionally solidified zirconia-mullite fibres. Their microstructure changes from planar coupled eutectic to dendritic eutectic mor-phology, when the growth rate rises from 1 to 500 mm/h, along with an incre-ment of tetragonal zirconia content. Furthermore, high growth rates lead to the development of Al-Si-Y glassy phase, and thus less mullite amount, which is found to considerably reduce the total ionic conduction of as-grown fibres. The reduction of the glassy phase content after annealing (10h; 1400 ºC) promotes an increase of the total ionic conduction (≥0.01 S/cm at 1370 °C), raising the mullite and tetragonal zirconia contents and leading to microstructural differ-ences, namely the distribution and size of the zirconia constituent. This has important consequences in conductivity by improving the percolation pathways. A notable increase in hardness is observed from 11.3 GPa for the 10 mm/h pulled fibre to 21.2 GPa for the fibre grown at 500 mm/h. The ultra-fine eutectic morphology of the 500 mm/h fibres results in a maximum value of 534 MPa for room temperature bending strength, which decreases to about one-fourth of this value at high temperature testing (1400 ºC) due to the soft nature of the glassy-matrix.

Ecology and conservation of felids in the Brazilian pantanal

Habitat conversion and environmental degradation have reached alarming levels in the Pantanal, endangering all its biodiversity. This scenario is complicated by the fact that the biome relies on only a few protected areas, which combined do not exceed 10% of the territory. Felids, as predators, play a vital role in the maintenance of this ecosystem, but require large areas, have low population densities and, typically, are very sensitive to environmental disturbances. Amolar Mountain Ridge is considered an area of extreme importance and high priority for conservation within the biome. There are four species of felids in this region: the jaguar (Panthera onca), the puma (Puma concolor), the ocelot (Leopardus pardalis), and jaguarundi (Puma yagouaroundi). However, little is known about the ecology of these species in this region or the magnitude of interaction between the communities living around the protected areas and the animals. The goal of this study was to increase our knowledge about these felids and understand how people interact with them in order to contribute to their conservation in the network of parks within Amolar. Camera trapping surveys were carried out in two areas of the network, covering approximately 83,000 hectares, in order to identify the species of mammals occurring in the region, those that may be potential prey for the felids, and to obtain basic ecological data about both felids and prey. In addition, we conducted surveys in three riverside schools in order to assess the knowledge, perceptions and attitudes of schoolchildren regarding the four focal felids, and surveys among the adult population to assess their perceptions and attitudes towards the jaguar. We recorded a total of 33 species of mammals from both study areas. The large cats were cathemeral, reflecting the temporal activity of larger prey, whereas the ocelot was nocturnal, mirroring the activity of smaller prey. Jaguar occupancy was influenced by prey abundance, while puma occupancy was influenced by patch density in drier dense forest. Jaguars and pumas may be competitors over temporal and spatial scales, while no resource overlap was found for ocelots. Overall, both adults and children tended to have negative perceptions about the cats, which were related to the fear of being attacked. To increase awareness about the species and to maximize the effectiveness of protective measures in the network of reserves, it is recommended to develop and implement an Environmental Educational Program in the medium- to long-term in order to minimize the fear of these felids and to counsel locals on the role of felids in the maintenance of the Pantanal’s biodiversity.

Structural characterization and biological activity of polysaccharides from infusions used in the popular tradition

The use of plants with medicinal purposes is an ancient practice still very common in developing regions, and is rapidly spreading in industrialized countries. This fact is evidenced by the large number of ethnobotanical studies found in the literature referring that these plants are often used as decoctions and infusions. In most studies the reported biological activities are attributed to the presence of phenolic compounds, due to their antioxidant properties, and to polysaccharides, with its anti-tumoral properties. In “Trás-os-Montes” region, some of the most popular infusions used by the popular medicine are prepared with the dried leaves of Fraxinus angustifolia, the dried shoots of Mentha suaveolens, and the dried inflorescences of Pterospartum tridentatum. However, there are no studies about the polysaccharides present in these infusions. Thus, through the structural characterization of the polysaccharides present in the infusions of F. angustifolia, M. suaveolens, and P. tridentatum, the present PhD thesis intends to evaluate the possible relation between polysaccharides and the immunostimulatory activity that these infusions might present. In a preliminary phase, infusions of F. angustifolia were prepared according to the popular tradition, and it was observed that the obtained water soluble material contained approximately 85% of material non-retained in C18 cartridges, with hydrophilic characteristics, with the remaining 15% comprising retained-material with hydrophobic characteristics. It was also shown that the infusions only contained between 2 and 4% of high molecular weight material (HMWM), which comprised approximately 30% of carbohydrate material. Sugar and methylation analysis of the HMWM suggested the presence of pectic polysaccharides, together with type II arabinogalactans, mannans, and xyloglucans. However, the amount of material obtained is to low for the fractionation, and structural analysis of the polysaccharides present. The 4 h decoction, divided in two periods of 2 h, with water renewal, allowed to increase the HMWM yield, relatively to the infusions traditional infusions. It was also observed that the decoction also allowed to increase the HMWM proportion of carbohydrate material, due to an increase in the proportion of uronic acid present, although the neutral sugar residues seemed to be detected in similar proportions. Therefore, in all the experiments subsequently performed, the HMWM used was obtained through the decoction of F. angustifolia dried leaves, M. suaveolens dried shoots, and P. tridentatum dried inflorescences. x After the fractionation, through ethanol precipitation, and anion exchange chromatography, of the polysaccharides from the HMWM obtained by the decoction of the vegetable material of the distinct studied plants, it was observed the presence of high proportions of pectic polysaccharides, containing type I arabinogalactans, together with minor proportions of type II arabinogalactans, mannans, and xyloglucans. The presence of pectic polysaccharides in the extracts from F. angustifolia was also evidenced through endo-polygalacturonase treatment, and ESI-MS and ESI-MS/MS experiments. The detection of linked pentose and uronic acid residues, also seemed to suggest the presence of xylogalacturonan domains in the pectic polysaccharides from F. angustifolia. The extracts from F. angustifolia dried leaves also contained type II arabinogalactans that exhibited a higher structural diversity than those detected in the M. suaveolens, and P. tridentatum extracts, particularly in the substitution degree of the galactan backbone, and in the extension of the (1→5)-Araf side chains. Moreover, for all the plants studied, it was also observed that the type II arabinogalactans, extracted during the 2nd 2h of the extraction process, exhibited a substitution degree of the galactan backbone higher than those extracted during the 1st 2h. The extracts from P. tridentatum dried inflorescences contained higher proportions of mannans, and also of xyloglucans, both presenting a substitution degree higher than those, which were detected in lower proportion in the extracts of F. angustifolia and M. suaveolens. Through ESI-MS and ESI-MS/MS it was possible to evidence that the mannans present in the extracts of P. tridentatum presented acetyl groups on the O-2 of the mannosyl residues. It was also evidenced that the P. tridentatum mannans were more extensively acetylated than the mannans detected in the coffee infusion, LBG, and other non-conventional mannan sources. Moreover, it was detected the presence of oligosaccharides comprising hexose residues linked to non acetylated pentose residues, suggesting the possible presence of arabinose residues in the mannans from P. tridentatum extracts. The immunostimulatory activity of three fractions isolated from the extracts of F. angustifolia, M. suaveolens, and P. tridentatum, was tested and an increase in the NO production by macrophages, without compromising their cellular viability, was observed. The type I, and type II arabinogalactans detected in the extracts from F. angustifolia, and M. suaveolens seem to have contributed for the observed immunostimulatory activity. For the fraction from P. tridentatum, the mannans acetylation, and the presence of type I, and type II arabinogalactans seemed to contribute for the macrophage immunostimulatory activity observed. The possible presence of storage xyloglucans from the inflorescences seeds, also seems to have contributed for the immunostimulatory activity registered when the macrophages were stimulated with higher extract concentrations. The results obtained allow to conclude that the extracts of F. angustifolia dried leaves, M. suaveolens dried shoots, and P. tridentatum dried inflorescences contained high proportions of pectic polysaccharides, exhibiting type I arabinogalactans, together with other polysaccharides, such as type II arabinogalactans, mannans, and xyloglucans. This polysaccharide mixture seems to have contributed to the immunostimulatory activity of fractions isolated from the extracts of the studied plants. Therefore, as the same type of polysaccharides seem to be present in the decoctions and in the infusions, it seems possible that the polysaccharides might contribute for the therapeutic properties frequently associated by the popular tradition to the infusions of these plants.

Viabilidade do biodiesel de microalgas: otimização de técnicas de extração

Os problemas relacionados com o consumo energético e as emissões de poluentes relativas ao setor dos transportes representam seguramente a maior preocupação ao nível Europeu no que respeita aos gases com efeito de estufa e à poluição atmosférica. Uma das formas de resolver/minimizar estes problemas é através da aposta em combustíveis alternativos. Em particular, os biocombustíveis poderão ser uma alternativa interessante aos combustíveis convencionais. As microalgas, como matéria-prima para produção de biodiesel, apresentam-se com excelentes perspetivas de futuro e com vantagens competitivas no campo das energias renováveis. É nesta perspetiva que se enquadra o presente trabalho, cujos objetivos consistiram na extração de biodiesel a partir de microalgas secas (Nannochloropsis gaditana e Scenedesmus sp.) e na otimização das respetivas técnicas de extração lipídica. Verificou-se que, em função dos métodos e condições utilizadas, a espécie Nannochloropsis gaditana apresenta um potencial de produção de biodiesel superior à espécie Scenedesmus sp. (eficiências de extração de 24,6 (wt.%) e 9,4 (wt.%) respetivamente). Um método de rotura celular conjugado com o processo de extração lipídica via solvente orgânico é essencial, pois conseguiu-se um acréscimo de 42% no rendimento de extração, sendo 10 minutos o tempo ideal de operação. Solventes como o metanol e sistema de solventes diclorometano/metanol mostraram ser mais eficazes quando se pretende extrair lípidos de microalgas, com valores de eficiência de remoção de 30,9 (wt.%) e 23,2 (wt.%) respetivamente. De forma a valorizar os resultados obtidos no processo de extração recorreu-se à sua conversão em biodiesel através da transesterificação catalítica ácida, onde se obteve uma eficiência de conversão de 17,8 (wt.%) para a espécie Nannochloropsis gaditana.