A tale of two bioprocesses

Bioprocesses use microorganisms or cells in order to produce and/or obtain some desired products. Nowadays these strategies appear as a fundamental alternative to the traditional chemical processes. Amongst the many advantages associated to their use in the chemical, oil or pharmaceutical industries, their low cost, easily scale-up and low environmental impact should be highlighted. This work reports two examples of bioprocesses as alternatives to traditional chemical processes used by the oil and pharmaceutical industries. In the first part of this work it was studied an example of a bioprocess based on the use of microorganisms in enhanced oil recovery. Currently, due to high costs of oil and its scarcity, the enhanced oil recovery techniques become very attractive. Between the available techniques the use of microbial enhanced oil recovery (MEOR) has been highlighted. This process is based on the stimulation of indigenous microorganisms or by the injection of microorganism consortia to produce specific metabolites and hence increase the amount of oil recovered. In the first chapters of this work the isolation of several microorganisms from samples of paraffinic Brazilian oils is described, and their tensioactive and biodegradability properties are presented. Furthermore, the chemical structures of the biosurfactants produced by those isolates were also characterized. In the final chapter of the first part, the capabilities of some isolated bacteria to enhance the oil recovery of paraffinic Brazilian oils entrapped in sand-pack columns were evaluated. In the second part of this work it was investigated aqueous two-phase systems or aqueous biphasic systems (ABS) as extractive strategies for antibiotics directly from the fermented broth in which they are produced. To this goal, several aqueous two-phase systems composed of ionic liquids (ILs) and polymers were studied for the first time and their phase diagrams were determined. The novel ATPS appear as effective and economic methods to extract different biomolecules or/and biological products. Thus, aiming the initial antibiotics extraction purpose it was studied the influence of a wide range of ILs and polymers in the aqueous two-phase formation ability, as well as their influence in the partitioning of several type-molecules, such as amino acids, alkaloids and dyes. As a final chapter it is presented the capacity of these novel systems to extract the antibiotic tetracycline directly from the fermented broth of Streptomyces aureofaciens.

Reciclagem termoquímica de resíduos de plásticos e de pneus por pirólise

A sociedade moderna encontra-se cada vez mais dependente dos combustíveis líquidos bem como de produtos derivados do petróleo. Em virtude do limitado tempo de vida das reservas naturais de petróleo, torna-se imperativo encontrar fontes alternativas de produção de hidrocarbonetos. A pirólise de resíduos de pneus e plásticos pode ser uma dessas possíveis fontes. Neste processo, o tratamento termoquímico implementado aos resíduos permite, não só, a valorização económica resultante da sua transformação em produtos de valor acrescido, como também a recuperação do conteúdo orgânico. O referido processo conduz à formação de hidrocarbonetos em fase líquida que podem ser utilizados pela indústria como combustíveis líquidos e/ou como matéria-prima. O presente trabalho tem como objectivo principal a definição das condições experimentais mais propícias à obtenção de combustíveis líquidos (maximização) resultantes da pirólise de misturas de resíduos de borracha de pneus e plásticos nomeadamente polietileno (PE), polipropileno (PP) e poliestireno (PS). Como instrumento de optimização das condições experimentais optou-se pela Metodologia dos Planos Factoriais de Ensaios. Os resultados experimentais obtidos mostram que as taxas de conversão em fase líquida podem atingir valores superiores a 80% (m/m) dependendo das condições experimentais utilizadas bem como do tipo e mistura de resíduos a pirolisar. Os rendimentos das fracções gasosa e sólida podem atingir valores na ordem dos 5% e 12% (respectivamente). Foi também estudado o efeito das condições experimentais nomeadamente a temperatura de reacção, pressão inicial, tempo de reacção e composição da mistura. Este estudo revelou que a maximização da fracção líquida é favorecida por uma temperatura de ensaio de 370ºC, uma pressão inicial de 0,48MPa e um tempo de ensaio de 15 minutos. Relativamente à composição da mistura, os melhores resultados foram obtidos com 30% (m/m) de resíduos de borracha de pneus (BP) associados a uma mistura de 70% (m/m) de resíduos de plásticos composta por 20% polietileno, 30% polipropileno e 20% poliestireno. Igualmente foi feita a caracterização física e química da matéria-prima e dos produtos obtidos pelo referido processo, bem como, o estudo da presença de diferentes substâncias potencialmente doadores de hidrogénio ao meio reaccional de forma a melhorar o rendimento líquido. Por último, foram realizados estudos cinéticos das reacções químicas de formação dos diferentes produtos aos resíduos de borracha de pneus (BP), misturas de resíduos de plástico (PE, PP e PS) e suas misturas. Ainda, foram ajustados os resultados obtidos pelo modelo teórico aos resultados experimentais, propostos mecanismos reaccionais de formação dos produtos e calculados os parâmetros cinéticos. De acordo com os resultados obtidos, a pirólise pode representar um papel significativo na valorização energética e orgânica destes resíduos apesar de, ainda, ser necessário o desenvolvimento de alguns aspectos tecnológicos de modo a tornar mais atraente a implementação desta tecnologia à escala industrial.

Microbe-mediated recovery of salt marshes contaminated with oil hydrocarbons

Salt marshes are highly productive intertidal habitats that serve as nursery grounds for many commercially and economically important species. Because of their location and physical and biological characteristics, salt marshes are considered to be particularly vulnerable to anthropogenic inputs of oil hydrocarbons. Sediment contamination with oil is especially dangerous for salt marsh vegetation, since low molecular weight aromatic hydrocarbons can affect plants at all stages of development. However, the use of vegetation for bioremediation (phytoremediation), by removal or sequestration of contaminants, has been intensively studied. Phytoremediation is an efficient, inexpensive and environmental friendly approach for the removal of aromatic hydrocarbons, through direct incorporation by the plant and by the intervention of degrading microbial populations in the rhizosphere (microbe-assisted phytoremediation). Rhizosphere microbial communities are enriched in important catabolic genotypes for degradation of oil hydrocarbons (OH) which may have a potential for detoxification of the sediment surrounding the roots. In addition, since rhizosphere bacterial populations may also internalize into plant tissues (endophytes), rhizocompetent AH degrading populations may be important for in planta AH degradation and detoxification. The present study involved field work and microcosms experiments aiming the characterization of relevant plant-microbe interactions in oilimpacted salt marshes and the understanding of the effect of rhizosphere and endosphere bacteria in the role of salt marsh plants as potential phytoremediation agents. In the field approach, molecular tools were used to assess how plant species- and OH pollution affect sediment bacterial composition [bulk sediment and sediment surrounding the roots (rhizosphere) of Halimione portulacoides and Sarcocornia perennis subsp. perennis] in a temperate estuary (Ria de Aveiro, Portugal) chronically exposed to OH pollution. In addition, the 16S rRNA gene sequences retrieved in this study were used to generate in silico metagenomes and to evaluate the distribution of potential bacterial traits in different microhabitats. Moreover, a combination of culture-dependent and -independent approaches was used to investigate the effect of oil hydrocarbons contamination on the structure and function of endophytic bacterial communities of salt marsh plants.Root systems of H. portulacoides and S. perennis subsp. perennis appear to be able to exert a strong influence on bacterial composition and in silico metagenome analysis showed enrichment of genes involved in the process of polycyclic aromatic hydrocarbon (PAH) degradation in the rhizosphere of halophyte plants. The culturable fraction of endophytic degraders was essentially closely related to known OH-degrading Pseudomonas species and endophytic communities revealed sitespecific effects related to the level of OH contamination in the sediment. In order to determine the effects of oil contamination on plant condition and on the responses in terms of structure and function of the bacterial community associated with plant roots (rhizosphere, endosphere), a microcosms approach was set up. The salt marsh plant Halimione portulacoides was inoculated with a previous isolated Pseudomonas sp. endophytic degrader and the 2-methylnaphthalene was used as model PAH contaminant. The results showed that H. portulacoides health and growth were not affected by the contamination with the tested concentration. Moreover, the decrease of 2-methylnaphthalene at the end of experiment, can suggest that H. portulacoides can be considered as a potential plant for future uses in phytoremedition approaches of contaminated salt marsh. The acceleration of hydrocarbon degradation by inoculation of the plants with the hydrocarbon-degrading Pseudomonas sp. could not, however, be demonstrated, although the effects of inoculation on the structure of the endophytic community observed at the end of the experiment indicate that the strain may be an efficient colonizer of H. portulacoides roots. The results obtained in this work suggest that H. portulacoides tolerates moderate concentrations of 2-methylnaphthalene and can be regarded as a promising agent for phytoremedition approaches in salt marshes contaminated with oil hydrocarbons. Plant/microbe interactions may have an important role in the degradation process, as plants support a diverse endophytic bacterial community, enriched in genetic factors (genes and plasmids) for hydrocarbon degradation.