Metabonomic studies to assess beer quality and stability

The work reported in this thesis aimed at applying the methodology known as metabonomics to the detailed study of a particular type of beer and its quality control, with basis on the use of multivariate analysis (MVA) to extract meaningful information from given analytical data sets. In Chapter 1, a detailed description of beer is given considering the brewing process, main characteristics and typical composition of beer, beer stability and the commonly used analytical techniques for beer analysis. The fundamentals of the analytical methods employed here, namely nuclear magnetic resonance (NMR) spectroscopy, gas-chromatography-mass spectrometry (GC-MS) and mid-infrared (MIR) spectroscopy, together with the description of the metabonomics methodology are described shortly in Chapter 2. In Chapter 3, the application of high resolution NMR to characterize the chemical composition of a lager beer is described. The 1H NMR spectrum obtained by direct analysis of beer show a high degree of complexity, confirming the great potential of NMR spectroscopy for the detection of a wide variety of families of compounds, in a single run. Spectral assignment was carried out by 2D NMR, resulting in the identification of about 40 compounds, including alcohols, amino acids, organic acids, nucleosides and sugars. In a second part of Chapter 3, the compositional variability of beer was assessed. For that purpose, metabonomics was applied to 1H NMR data (NMR/MVA) to evaluate beer variability between beers from the same brand (lager), produced nationally but differing in brewing site and date of production. Differences between brewing sites and/or dates were observed, reflecting compositional differences related to particular processing steps, including mashing, fermentation and maturation. Chapter 4 describes the quantification of organic acids in beer by NMR, using different quantitative methods: direct integration of NMR signals (vs. internal reference or vs. an external electronic reference, ERETIC method) and by quantitative statistical methods (using the partial least squares (PLS) regression) were developed and compared. PLS1 regression models were built using different quantitative methods as reference: capillary electrophoresis with direct and indirect detection and enzymatic essays. It was found that NMR integration results generally agree with those obtained by the best performance PLS models, although some overestimation for malic and pyruvic acids and an apparent underestimation for citric acid were observed. Finally, Chapter 5 describes metabonomic studies performed to better understand the forced aging (18 days, at 45 ºC) beer process. The aging process of lager beer was followed by i) NMR, ii) GC-MS, and iii) MIR spectroscopy. MVA methods of each analytical data set revealed clear separation between different aging days for both NMR and GC-MS data, enabling the identification of compounds closely related with the aging process: 5-hydroxymethylfurfural (5-HMF), organic acids, γ-amino butyric acid (GABA), proline and the ratio linear/branched dextrins (NMR domain) and 5-HMF, furfural, diethyl succinate and phenylacetaldehyde (known aging markers) and, for the first time, 2,3-dihydro-3,5-dihydroxy-6-methyl-4(H)-pyran-4-one xii (DDMP) and maltoxazine (by GC-MS domain). For MIR/MVA, no aging trend could be measured, the results reflecting the need of further experimental optimizations. Data correlation between NMR and GC-MS data was performed by outer product analysis (OPA) and statistical heterospectroscopy (SHY) methodologies, enabling the identification of further compounds (11 compounds, 5 of each are still unassigned) highly related with the aging process. Data correlation between sensory characteristics and NMR and GC-MS was also assessed through PLS1 regression models using the sensory response as reference. The results obtained showed good relationships between analytical data response and sensory response, particularly for the aromatic region of the NMR spectra and for GC-MS data (r > 0.89). However, the prediction power of all built PLS1 regression models was relatively low, possibly reflecting the low number of samples/tasters employed, an aspect to improve in future studies.

Detecção multiutilizador do domínio da frequência para sistemas DS-CDMA

Os Sinais de Espalhamento de Espectro de Sequência Directa exibem propriedades cicloestacionárias que implicam redundância entre componentes de frequência espaçadas por múltiplos da taxa de símbolo. Nesta tese, é apresentado um cancelador de interferência multiutilizador (Cancelador por translação na frequência - FSC) que tira partido desta propriedade. Este cancelador linear opera no domínio da frequência no sinal espalhado de tal forma que minimiza a interferência e ruído na saída (Critério do Mínimo Erro Quadrado Médio). Além de testado para o caso de antena única, são avaliadas as performances das configurações de antenas múltiplas para o caso de beamforming e canais espacialmente descorrelacionados considerando sistemas síncronos e sistemas com desalinhamento no tempo dos perfis de canais (ambos UMTS-TDD). Essas configurações divergiam na ordem da combinação temporal, combinação espacial e detecção multiutilizador. As configurações FSC foram avaliadas quando concatenadas com o PIC-2D. Os resultados das simulações mostram consideráveis melhorias nos resultados relativamente ao RAKE-2D convencional e PIC-2D. Foi atingida performance próximo ao RAKE de utilizador único quando o FSC foi avaliado concatenado com PIC-2D em quase todas as configurações. Todas as configurações foram avaliadas com modulação QPSK, 8-PSK e 16-QAM. Foi introduzida codificação Turbo e identificou-se as situações da vantagem de utilização do FSC antes do PIC-2D. As modulações 8-PSK e 16-QAM foram igualmente testadas com codificação.

Macroinvertebrate traits as biomonitoring tools in agricultural scenarios

Os ecossistemas de água doce – responsáveis por funções ambientais importantes e pelo fornecimento de bens e serviços insubstituíveis – têm vindo a ser severamente afectados por perturbações antropogénicas. A conversão de floresta em terreno agrícola afecta os sistemas aquáticos através de uma série de mecanismos: sedimentação; excesso de nutrientes; contaminação; alterações hidrológicas; e remoção de vegetação ripícola. As comunidades de macroinvertebrados de água doce – devido à sua diversidade, ubiquidade e sensibilidade às perturbações ambientais – revelam-se como particularmente adequadas para estudos de avaliação da integridade ecológica destes sistemas expostos simultaneamente a múltiplos factores de impacto. O uso sistemático de respostas biológicas para avaliação de mudanças ambientais – ou biomonitorização – pode ser levado a cabo através de diversas metodologias, que, de uma forma geral, não consideram aspectos funcionais das comunidades biológicas e têm aplicabilidade geograficamente restrita. A biomonitorização através de atributos biológicos (características que reflectem a adaptação das espécies ao seu meio ambiente) revela-se como uma ferramenta promissora na resolução dos problemas referidos, apresentando vantagens adicionais: relações causa-efeito directas; melhoria na diferenciação de impactos; e integração da variabilidade natural. O presente estudo apresenta uma revisão critica do estado-da-arte actual na área do uso de atributos biológicos em biomonitorização. Até à data de publicação, não estava disponível nenhum outro trabalho com a base conceptual do uso de atributos de macroinvertebrados enquanto descritores de comunidades e para efeitos de biomonitorização e gestão de sistemas de água doce. Descrevem-se as teorias ecológicas de suporte destas metodologias (conceitos de habitat-molde e de filtros paisagísticos) e os estudos que aplicaram estas teorias em cenários reais, tendo-se chamado a atenção para questões técnicas e possíveis soluções. As necessidades futuras nesta área englobam: o desenvolvimento de uma só ferramenta de biomonitorização de aplicação alargada; uma maior compreensão da variabilidade natural nas comunidades biológicas; diminuição dos efeitos de soluções de compromisso biológico e sindromas; realização de estudos autoecológicos adicionais; e detecção de impactos específicos em cenários de impacto complexos. Um dos objectivos deste estudo foi contribuir para a melhoria das técnicas de biomonitorização através de atributos, focalizando em comunidades de macroinvertebrados ribeirinhas em diferentes regiões biogeográficas (as bacias hidrográficas dos rios: Little e Salmon em New Brunswick, Canadá; Anllóns na Galiza, Espanha; Reventazón em Cartago, Costa Rica). Em cada região, foram estudados gradientes de uso agrícola de solo, incluindo desde bacias hidrográficas quase exclusivamente cobertas por floresta até bacias sob a influência maioritária de actividades agrícolas intensivas. Em cada gradiente de uso de solo, a caracterização da comunidade biológica (por amostragem de macroinvertebrados em troços de rápidos) foi acompanhada pela caracterização do habitat circundante (incluindo propriedades da bacia hidrográfica, análise química das águas e outras propriedades à escala local). A comunidade de macroinvertebrados foi caracterizada através de informação taxonómica, métricas estruturais, índices de diversidade, métricas de tolerância, índices bióticos e através da compilação de atributos biológicos e fisiológicos gerais, de história de vida e de resistência a perturbações. Análises estatísticas univariadas e multivariadas foram usadas para evidenciar os gradientes biológicos e físico-químicos, confirmar a sua co-variação, testar a significância da discriminação de níveis de impacto e estabelecer comparações inter-regionais. A estrutura de comunidades revelou os complexos gradientes de impacto, que por sua vez co-variaram significativamente com os gradientes de uso de solo. Os gradientes de impacto relacionaram-se sobretudo com entrada de nutrientes e sedimentação. Os gradientes biológicos definidos pelas medidas estruturais seleccionadas co-variaram com os gradientes de impacto estudados, muito embora apenas algumas variáveis estruturais tenham individualmente discriminado as categorias de uso de solo definidas a priori. Não foi detectada consistência nas respostas das medidas estruturais entre regiões biogeográficas, tendo-se confirmadado que as interpretações puramente taxonómicas de impactos são difíceis de extrapolar entre regiões. Os gradientes biológicos definidos através dos atributos seleccionados também co-variaram com os gradientes de perturbação, tendo sido possível obter uma melhor discriminação de categorias de uso de solo. Nas diferentes regiões, a discriminação de locais mais impactados foi feita com base num conjunto similar de atributos, que inclui tamanho, voltinismo, técnicas reproductivas, microhabitat, preferências de corrente e substrato, hábitos alimentares e formas de resistência. Este conjunto poderá vir a ser usado para avaliar de forma predictiva os efeitos das modificações severas de uso de solo impostas pela actividade agrícola. Quando analisadas simultaneamente através dos atributos, as comunidades das três regiões permitiram uma moderada mas significativa discriminação de níveis de impacto. Estas análises corroboram as evidências de que as mudanças nas comunidades de macroinvertebrados aquáticos em locais sob a influência de agricultura intensiva podem seguir uma trajectória convergente no espaço multidimensional, independentemente de factores geográficos. Foram fornecidas pistas para a identificação de parâmetros específicos que deverão ser tidos em conta no planeamento de novos programas de biomonitorização com comunidades de macroinvertebrados bentónicos, para aplicação numa gestão fluvial verdadeiramente ecológica, nestas e noutras regiões. Foram ainda sugeridas possíveis linhas futuras de investigação.

Characterization of water-soluble organic matter from urban aerosols

Water-soluble organic matter (WSOM) from atmospheric particles comprises a complex array of molecular structures that play an important role on the physic-chemical properties of atmospheric particles and, therefore, are linked to several global-relevant atmospheric processes which impact the climate and public health. Due to the large variety of sources and formation processes, adequate knowledge on WSOM composition and its effects on the properties of atmospheric aerosol are still limited. Therefore, this thesis aims at providing new insights on the molecular composition of WSOM from fine atmospheric aerosols typical of an urban area (Aveiro, Portugal). In a first step, adsorption phenomena of semivolatile organic compounds on quartz fibre filters employed in the collection of atmospheric aerosols were assessed. Afterwards, atmospheric aerosol samples were collected during fifteen months, on a weekly basis. A mass balance of aerosol samples was performed in order to set the relative contribution of elemental carbon, WSOM and water-insoluble organic matter to the aerosol mass collected at the urban area of Aveiro, with a special focus on the assessment of the influence of different meteorological conditions. In order to assess the chemical complexity of the WSOM from urban aerosols, their structural characteristics were studied by means of Fourier transform infrared infrared - Attenuated Total Reflectance (FTIR-ATR) and solid-state cross polarization with magic angle spinning 13C nuclear magnetic resonance (CPMAS 13C NMR) spectroscopies, as well as their elemental composition. The structural characterization of aerosol WSOM samples collected in the urban area highlighted a highly complex mixture of functional groups. It was concluded that aliphatic and aromatic structures, hydroxyl groups and carboxyl groups are characteristic to all samples. The semi-quantitative assessment of the CPMAS 13C NMR data showed different distributions of the various functional groups between the aerosol samples collected at different seasons. Moreover, the presence of signals typical of lignin-derived structures in both CPMAS 13C NMR and FTIR-ATR spectra of the WSOM samples from the colder seasons, highlights the major contribution of biomass burning processes in domestic fireplaces, during low temperature conditions, into the bulk chemical properties of WSOM from urban aerosols. A comprehensive two-dimensional liquid chromatography (LC x LC) method, on-line coupled to a diode array, fluorescence, and evaporative light scattering detectors, was employed for resolving the chemical heterogeneity of the aerosol WSOM samples and, simultaneously, to map the hydrophobicity versus the molecular weight distribution of the samples. The LC x LC method employed a mixed-mode hydrophilic interaction column operating under aqueous reversed phase mode in the first dimension, and a size-exclusion column in the second dimension, which was found to be useful for separating the aerosol WSOM samples into various fractions with distinct molecular weight and hydrophobic features. The estimative of the average molecular weight (Mw) distribution of the urban aerosol WSOM samples ranged from 48 to 942 Da and from 45 to 1241 Da in terms of UV absorption and fluorescence detection, respectively. Findings suggest that smaller Mw group fractions seem to be related to a more hydrophobic nature.

Development of infrared spectroscopy for assessing bacterial quality in foods

Rapid and specific detection of foodborne bacteria that can cause food spoilage or illness associated to its consumption is an increasingly important task in food industry. Bacterial detection, identification, and classification are generally performed using traditional methods based on biochemical or serological tests and the molecular methods based on DNA or RNA fingerprints. However, these methodologies are expensive, time consuming and laborious. Infrared spectroscopy is a reliable, rapid, and economic technique which could be explored as a tool for bacterial analysis in the food industry. In this thesis it was evaluated the potential of IR spectroscopy to study the bacterial quality of foods. In Chapter 2, it was developed a calibration model that successfully allowed to predict the bacterial concentration of naturally contaminated cooked ham samples kept at refrigeration temperature during 8 days. In this part, it was developed the methodology that allowed the best reproducibility of spectra from bacteria colonies with minimal sample preparation, which was used in the subsequent work. Several attempts trying different resolutions and number of scans in the IR were made. A spectral resolution of 4 cm-1, with 32 scans were the settings that allowed the best results. Subsequently, in Chapter 3, it was made an attempt to identify 22 different foodborne bacterial genera/species using IR spectroscopy coupled with multivariate analysis. The principal component analysis, used as an exploratory technique, allowed to form distinct groups, each one corresponding to a different genus, in most of the cases. Then, a hierarchical cluster analysis was performed to further analyse the group formation and the possibility of distinction between species of the same bacterial genus. It was observed that IR spectroscopy not only is suitable to the distinction of the different genera, but also to differentiate species of the same genus, with the simultaneous use of principal component analysis and cluster analysis techniques. The utilization of IR spectroscopy and multivariate statistical analysis were also investigated in Chapter 4, in order to confirm the presence of Listeria monocytogenes and Salmonella spp. isolated from contaminated foods, after growth in selective medium. This would allow to substitute the traditional biochemical and serological methods that are used to confirm these pathogens and that delay the obtainment of the results up to 2 days. The obtained results allowed the distinction of 3 different Listeria species and the distinction of Salmonella spp. from other bacteria that can be mistaken with them. Finally, in chapter 5, high pressure processing, an emerging methodology that permits to produce microbiologically safe foods and extend their shelf-life, was applied to 12 foodborne bacteria to determine their resistance and the effects of pressure in cells. A treatment of 300 MPa, during 15 minutes at room temperature was applied. Gram-negative bacteria were inactivated to undetectable levels and Gram-positive showed different resistances. Bacillus cereus and Staphylococcus aureus decreased only 2 logs and Listeria innocua decreased about 5 logs. IR spectroscopy was performed in bacterial colonies before and after HPP in order to investigate the alterations of the cellular compounds. It was found that high pressure alters bands assigned to some cellular components as proteins, lipids, oligopolysaccharides, phosphate groups from the cell wall and nucleic acids, suggesting disruption of the cell envelopes. In this work, bacterial quantification and classification, as well as assessment of cellular compounds modification with high pressure processing were successfully performed. Taking this into account, it was showed that IR spectroscopy is a very promising technique to analyse bacteria in a simple and inexpensive manner.