Phase equilibria modeling for biofuels production

Em consequência de uma série de problemas ambientais, económicos e políticos relacionados com o uso de combustíveis convencionais, vários países estão agora a focar as suas atenções em combustíveis alternativos. O biodiesel está na linha da frente das alternativas ao petróleo no sector dos transportes, sendo considerado uma opção a curto prazo visto que o seu preço é competitivo e não são necessárias mudanças nos motores para implementar o seu uso. De entres os possíveis processos de produzir biodiesel, a reacção de transesterificação com catálise básica é o método preferido. Depois da reacção são sempre necessários processos de purificação de modo ao biodiesel produzido cumprir os standards definidos para os combustíveis alternativos, reduzindo problemas de motor e consequentemente aumentando a sua aceitação por parte dos consumidores. De entre as especificações encontram-se o conteúdo em água, em álcool e em glicerol. Ser-se capaz de descrever correctamente o equilíbrio de fases de sistemas que são de interesse para os processos de purificação de biodieseis numa gama alargada de condições termodinâmicas é uma condição necessária para uma correcta simulação do processo industrial, de modo a se atingir uma elevada produtividade a baixos custos de operação. O uso de moléculas oxigenadas como combustíveis representa uma alteração significativa em termos da termodinâmica de soluções. Para combustíveis baseados em petróleo as equações de estado cúbicas e os modelos clássicos de coeficientes de actividade mostraram ser apropriados, no entanto para combustíveis novos como o biodiesel, sendo mais complexos do ponto de vista das interacções intermoleculares com formação de dipolos e pontes de hidrogénio, são necessários modelos termodinâmicos mais complexos para descrever essas interacções. Neste trabalho a CPA EoS (Cubic-Plus-Association Equation of State) será desenvolvida de modo a permitir uma descrição adequada dos equilíbrios líquido-vapor e líquido-líquido para uma serie de sistemas binários e multicomponentes contendo água, ácidos gordos, ésteres de ácidos gordos, glicerol e álcoois.

Reconstrução climática para Portugal através de downscaling dinâmico

Apresenta-se uma avaliação de vários métodos de downscaling dinâmico. Os métodos utilizados vão desde o método clássico de aninhar um modelo regional nos resultados de um modelo global, neste caso as reanálises do ECMWF, a métodos propostos mais recentemente, que consistem em utilizar métodos de relaxamento Newtoniano de forma a fazer tender os resultados do modelo regional aos pontos das reanálises que se encontram dentro do domínio deste. O método que apresenta melhores resultados envolve a utilização de um sistema variacional de assimilação de dados de forma a incorporar dados de observações com resultados do modelo regional. A climatologia de uma simulação de 5 anos usando esse método é testada contra observações existentes sobre Portugal Continental e sobre o oceano na área da Plataforma Continental Portuguesa, o que permite concluir que o método desenvolvido é apropriado para reconstrução climática de alta resolução para Portugal Continental.

A comunicação na promoção do termalismo em Viseu: novos meios para novos públicos

O Turismo apresenta-se, hoje, como uma área com imensas possibilidades de expansão na região de Viseu e mais ainda no que respeita ao termalismo, quer com a continuidade da qualidade do termalismo clássico quer com a consolidação do segmento de Saúde e Bem-estar. A comunicação, numa empresa, é muito importante, mas torna-se primordial que seja eficaz, e nisto, o recurso a línguas estrangeiras é fundamental, de modo a potenciar a competitividade internacional das empresas Portuguesas. De modo a respondermos à questão central deste estudo - o que é que as termas de Viseu estão a fazer de modo a comunicar eficazmente as suas valências aos diferentes públicos e qual a importância de iniciarem um esforço maior bem como de criarem instrumentos de comunicação mais eficazes e adequadas às aspirações de desenvolvimento económico e social – recorremos ao levantamento e à análise das fontes de informação utilizadas em termalismo, na região de Viseu, e da aplicação de questionários aos intervenientes no processo termal. Tendo em mente a questão fulcral desenvolveu-se um estudo composto por quatro capítulos, tendo um prévio, onde é apresentado o estudo. O primeiro é reservado ao enquadramento teórico, onde se cruzam as perspetivas de Linguística Sistémica Funcional, Turismo em Portugal e Comunicação de Informação. O segundo apresenta a metodologia de investigação adotada, o terceiro expõe a análise dos dados recolhidos, nos Sítios Web das estâncias termais Viseenses, nas brochuras, através dos questionários aplicados às rececionistas, à equipa médica, aos administradores das termas, aos presidentes das câmaras, aos aquistas e aos gabinetes de promoção termal. O terceiro capítulo termina com um diálogo de esclarecimento final efetuado aos presidentes camarários e aos administradores termais. No quarto e último capítulo são expostas as principais conclusões do estudo e é evidenciada a importância que as línguas estrangeiras têm na comunicação internacional dos produtos e serviços termais, bem como a necessidade do recurso a uma comunicação eficaz de modo a que as termas possam alcançar resultados mais proveitosos.

Toxicogenomics of natural and anthropogenic effectors in eleutheroembryos

The introduction of chemicals into the environment by human activities may represent a serious risk to environmental and human health. Environmental risk assessment requires the use of efficient and sensitive tools to determine the impact of contaminants on the ecosystems. The use of zebrafish for the toxicity assessment of pharmaceuticals, drugs, and pollutants, is becoming well accepted due to zebrafish unique advantages for the screening of compounds for hazard identification. The aim of the present work is to apply toxicogenomic approaches to identify novel biomarkers and uncovered potential modes of action of classic and emergent contaminants able to disrupt endocrine systems, such as the Retinoic Acid Receptor, Retinoid X Receptor and the Aryl Hydrocarbon Receptor. This study relies on different nuclear and cytosolic protein receptors and other conditional (ligand- or stress- activated) transcriptional factors that are intimately involved in the regulation of defensome genes and in mechanisms of chemical toxicity. The transcriptomic effects of organic compounds, endogenous compounds, and nanoparticles were analysed during the early stages of zebrafish development. Studying the gene expression profiles of exposed and unexposed organisms to pollutants using microarrays allowed the identification of specific gene markers and to establish a "genetic code" for the tested compounds. Changes in gene expression were observed at toxicant concentrations that did not cause morphological effects. Even at low toxicant concentrations, the observed changes in transcript levels were robust for some target genes. Microarray responses of selected genes were further complemented by the real time quantitative polymerase chain reaction (qRT-PCR) methodology. The combination of bio-informatic, toxicological analyses of differential gene expression profiles, and biochemical and phenotypic responses across the treatments allowed the identification of uncovered potential mechanisms of action. In addition, this work provides an integrated set of tools that can be used to aid management-decision making by improving the predictive capability to measure environmental stress of contaminants in freshwater ecosystems. This study also illustrates the potential of zebrafish embryos for the systematic, large-scale analysis of chemical effects on developing vertebrates.

On the application of optimal control techniques in lossy fieldbuses

The performance of real-time networks is under continuous improvement as a result of several trends in the digital world. However, these tendencies not only cause improvements, but also exacerbates a series of unideal aspects of real-time networks such as communication latency, jitter of the latency and packet drop rate. This Thesis focuses on the communication errors that appear on such realtime networks, from the point-of-view of automatic control. Specifically, it investigates the effects of packet drops in automatic control over fieldbuses, as well as the architectures and optimal techniques for their compensation. Firstly, a new approach to address the problems that rise in virtue of such packet drops, is proposed. This novel approach is based on the simultaneous transmission of several values in a single message. Such messages can be from sensor to controller, in which case they are comprised of several past sensor readings, or from controller to actuator in which case they are comprised of estimates of several future control values. A series of tests reveal the advantages of this approach. The above-explained approach is then expanded as to accommodate the techniques of contemporary optimal control. However, unlike the aforementioned approach, that deliberately does not send certain messages in order to make a more efficient use of network resources; in the second case, the techniques are used to reduce the effects of packet losses. After these two approaches that are based on data aggregation, it is also studied the optimal control in packet dropping fieldbuses, using generalized actuator output functions. This study ends with the development of a new optimal controller, as well as the function, among the generalized functions that dictate the actuator’s behaviour in the absence of a new control message, that leads to the optimal performance. The Thesis also presents a different line of research, related with the output oscillations that take place as a consequence of the use of classic co-design techniques of networked control. The proposed algorithm has the goal of allowing the execution of such classical co-design algorithms without causing an output oscillation that increases the value of the cost function. Such increases may, under certain circumstances, negate the advantages of the application of the classical co-design techniques. A yet another line of research, investigated algorithms, more efficient than contemporary ones, to generate task execution sequences that guarantee that at least a given number of activated jobs will be executed out of every set composed by a predetermined number of contiguous activations. This algorithm may, in the future, be applied to the generation of message transmission patterns in the above-mentioned techniques for the efficient use of network resources. The proposed task generation algorithm is better than its predecessors in the sense that it is capable of scheduling systems that cannot be scheduled by its predecessor algorithms. The Thesis also presents a mechanism that allows to perform multi-path routing in wireless sensor networks, while ensuring that no value will be counted in duplicate. Thereby, this technique improves the performance of wireless sensor networks, rendering them more suitable for control applications. As mentioned before, this Thesis is centered around techniques for the improvement of performance of distributed control systems in which several elements are connected through a fieldbus that may be subject to packet drops. The first three approaches are directly related to this topic, with the first two approaching the problem from an architectural standpoint, whereas the third one does so from more theoretical grounds. The fourth approach ensures that the approaches to this and similar problems that can be found in the literature that try to achieve goals similar to objectives of this Thesis, can do so without causing other problems that may invalidate the solutions in question. Then, the thesis presents an approach to the problem dealt with in it, which is centered in the efficient generation of the transmission patterns that are used in the aforementioned approaches.

Understanding and modelling hydrological and soil erosion processes in burnt forest catchments

Forest fires implications in overland flow and soil erosion have been researched for several years. Therefore, is widely known that fires enhance hydrological and geomorphological activity worldwide as also in Mediterranean areas. Soil burn severity has been widely used to describe the impacts of fire on soils, and has being recognized as a decisive factor controlling post-fire erosion rates. However, there is no unique definition of the term and the relationship between soil burn severity and post-fire hydrological and erosion response has not yet been fully established. Few studies have assessed post-fire erosion over multiple years, and the authors are aware of none which assess runoff. Small amount of studies concerning pre-fire management practices were also found. In the case of soil erosion models, the Revised Universal Soil Loss Equation (RUSLE) and the revised Morgan–Morgan–Finney (MMF) are well-known models, but not much information is available as regards their suitability in predicting post-fire soil erosion in forest soils. The lack of information is even more pronounced as regards post-fire rehabilitation treatments. The aim of the thesis was to perform an extensive research under the post fire hydrologic and erosive response subject. By understanding the effect of burn severity in ecosystems and its implications regarding post fire hydrological and erosive responses worldwide. Test the effect of different pre-fire land management practices (unplowed, downslope plowed and contour plowed) and time-since-fire, in the post fire hydrological and erosive response, between the two most common land uses in Portugal (pine and eucalypt). Assess the performance of two widely-known erosion models (RUSLE and Revised MMF), to predict soil erosion rates during first year following two wildfires of distinctive burn severity. Furthermore, to apply these two models considering different post-fire rehabilitation treatments in an area severely affected by fire. Improve model estimations of post-fire runoff and erosion rates in two different land uses (pine and eucalypt) using the revised MMF. To assess these improvements by comparing estimations and measurements of runoff and erosion, in two recently burned sites, as also with their post fire rehabilitation treatments. Model modifications involved: (1) focusing on intra-annual changes in parameters to incorporate seasonal differences in runoff and erosion; and (2) inclusion of soil water repellency in runoff predictions. Additionally, validate these improvements with the application of the model to other pine and eucalypt sites in Central Portugal. The review and meta-analysis showed that fire occurrence had a significant effect on the hydrological and erosive response. However, this effect was only significantly higher with increasing soil burn severity for inter-rill erosion, and not for runoff. This study furthermore highlighted the incoherencies between existing burn severity classifications, and proposed an unambiguous classification. In the case of the erosion plots with natural rainfall, land use factor affected annual runoff while land management affected both annual runoff and erosion amounts significantly. Time-since-fire had an important effect in erosion amounts among unplowed sites, while for eucalypt sites time affected both annual runoff and erosion amounts. At all studied sites runoff coefficients increase over the four years of monitoring. In the other hand, sediment concentration in the runoff, recorded a decrease during the same period. Reasons for divergence from the classic post-fire recovery model were also explored. Short fire recurrence intervals and forest management practices are viewed as the main reasons for the observed severe and continuing soil degradation. The revised MMF model presented reasonable accuracy in the predictions while the RUSLE clearly overestimated the observed erosion rates. After improvements: the revised model was able to predict first-year post-fire plot-scale runoff and erosion rates for both forest types, these predictions were improved both by the seasonal changes in the model parameters; and by considering the effect of soil water repellency on the runoff, individual seasonal predictions were considered accurate, and the inclusion of the soil water repellency in the model also improved the model at this base. The revised MMF model proved capable of providing a simple set of criteria for management decisions about runoff and erosion mitigation measures in burned areas. The erosion predictions at the validation sites attested both to the robustness of the model and of the calibration parameters, suggesting a potential wider application.