Biomass fly ash incorporation in cement based materials

In recent years, pressures on global environment and energy security have led to an increasing demand on renewable energy sources, and diversification of Europe’s energy supply. Among these resources the biomass could exert an important role, since it is considered a renewable and CO2 neutral energy resource once the consumption rate is lower than the growth rate, and can potentially provide energy for heat, power and transports from the same installation. Currently, most of the biomass ash produced in industrial plants is either disposed of in landfill or recycled on agricultural fields or forest, and most times this goes on without any form of control. However, considering that the disposal cost of biomass ashes are raising, and that biomass ash volumes are increasing worldwide, a sustainable ash management has to be established. The main objective of the present study is the effect of biomass fly ashes in cement mortars and concretes in order to be used as a supplementary cementitious material. The wastes analyzed in the study were collected from the fluidized bed boilers and grate boilers available in the thermal power plants and paper pulp plants situated in Portugal. The physical as well as chemical characterisations of the biomass fly ashes were investigated. The cement was replaced by the biomass fly ashes in 10, 20 and 30% (weight %) in order to investigate the fresh properties as well as the hardened properties of biomass fly ash incorporated cement mortar and concrete formulations. Expansion reactions such as alkali silica reaction (ASR), sulphate attack (external and internal) were conducted in order to check the durability of the biomass fly ash incorporated cement mortars and concretes. Alternative applications such as incorporation in lime mortars and alkali activation of the biomass fly ashes were also attempted. The biomass fly ash particles were irregular in shape and fine in nature. The chemical characterization revealed that the biomass fly ashes were similar to a class C fly ash. The mortar results showed a good scope for biomass fly ashes as supplementary cementitious materials in lower dosages (<20%). The poor workability, concerns about the organic content, alkalis, chlorides and sulphates stand as the reasons for preventing the use of biomass fly ash in high content in the cement mortars. The results obtained from the durability tests have shown a clear reduction in expansion for the biomass fly ash mortars/concretes and the binder blend made with biomass fly ash (20%) and metakaolin (10%) inhibited the ASR reaction effectively. The biomass fly ash incorporation in lime mortars did not improve the mortar properties significantly though the carbonation was enhanced in the 15-20% incorporation. The biomass fly ash metakaolin blend worked well in the alkali activated complex binder application also. Portland cement free binders (with 30-40 MPa compressive strength) were obtained on the alkali activation of biomass fly ashes (60-80%) blended with metakaolin (20-40%).

Pathways of recent fine-grained sediment transport on the central Portuguese continental margin

Com o intuito de estudar as principais vias de transporte de sedimentos finos recentes na zona central da margem continental Oeste Portuguesa, parâmetros geoquímicos, mineralógicos e granulométricos foram analisados em sedimentos superficiais e em matéria particulada colhida em armadilhas de sedimentos e integrados com observações da hidrodinâmica de fundo. Os parâmetros geoquímicos foram também estudados na coluna de sedimentos depositada nos últimos 150 anos e em sedimentos pré-industriais. Os referidos parâmetros determinados foram: concentrações elementares, isótopos estáveis de Pb, teores em materiais litogénicos, carbonato de cálcio e carbono orgânico. Os canhões de Lisboa-Setúbal e Cascais tiveram especial destaque no presente estudo dado que, até à data, encontram-se menos estudados que o Canhão da Nazaré. Os resultados mostram que a distribuição de sedimentos na zona central da margem ocidental Portuguesa é particionada pelos canhões e que a exportação de sedimentos da plataforma para zonas mais profundas da margem é restringida pelas correntes do talude, excepto onde os canhões funcionam como corredores para o transporte de sedimentos. Enquanto no Canhão de Lisboa-Setúbal, e provavelmente no Canhão de Cascais, o transporte de sedimentos até à zona inferior é limitada, provavelmente apenas despoletado por eventos de elevada energia, no Canhão da Nazaré o transporte ao longo do todo o canhão parece eficiente. As zonas superiores dos canhões de Lisboa-Setúbal e Cascais presentemente actuam como armadilhas de sedimentos finos, aprisionando partículas em suspensão provenientes da plataforma adjacente. A introdução directa de sedimentos provenientes das plumas dos rios Tejo e Sado nas zonas superiores dos canhões parece limitada, contudo a resuspensão dos sedimentos do prodelta do Tejo como resultado de ondas de tempestade e ondas de maré interna permite o transporte de sedimentos para os canhões adjacentes. Na plataforma de Lisboa-Setúbal-Sines foram identificadas as assinaturas geoquímicas e mineralógicas de diferentes fontes de sedimentos finos (e.g. estuários do Tejo e Sado, arribas costeiras, lagoas de St. André e Melides). As concentrações elementares pré-industriais são muito semelhantes nos canhões da Nazaré e Lisboa-Setúbal, mas variados graus de enriquecimento antrópico de metais traço estão presentes nos sedimentos recentes. A mais acentuada influência antrópica na última área referida é consistente com a sua proximidade a áreas densamente povoadas e industrializadas e com input de sedimentos originários dos rios Tejo e Sado, potenciais transportadores de partículas poluentes. A dispersão de Pb atmosférico parece também significativa sendo que toda a zona da plataforma continental adjacente aos canhões de Lisboa-Setúbal e Cascais apresenta-se enriquecida. A principal fonte de Pb antrópico identificada através de isótopos estáveis de Pb é consistente com a assinatura das cinzas de incineradoras. No Canhão de Lisboa a imersão de dragados contaminados parece ser também uma potencial importante fonte de metais traço antropogénicos.

Dependable wireless real-time communications for open environments

Wireless communication technologies have become widely adopted, appearing in heterogeneous applications ranging from tracking victims, responders and equipments in disaster scenarios to machine health monitoring in networked manufacturing systems. Very often, applications demand a strictly bounded timing response, which, in distributed systems, is generally highly dependent on the performance of the underlying communication technology. These systems are said to have real-time timeliness requirements since data communication must be conducted within predefined temporal bounds, whose unfulfillment may compromise the correct behavior of the system and cause economic losses or endanger human lives. The potential adoption of wireless technologies for an increasingly broad range of application scenarios has made the operational requirements more complex and heterogeneous than before for wired technologies. On par with this trend, there is an increasing demand for the provision of cost-effective distributed systems with improved deployment, maintenance and adaptation features. These systems tend to require operational flexibility, which can only be ensured if the underlying communication technology provides both time and event triggered data transmission services while supporting on-line, on-the-fly parameter modification. Generally, wireless enabled applications have deployment requirements that can only be addressed through the use of batteries and/or energy harvesting mechanisms for power supply. These applications usually have stringent autonomy requirements and demand a small form factor, which hinders the use of large batteries. As the communication support may represent a significant part of the energy requirements of a station, the use of power-hungry technologies is not adequate. Hence, in such applications, low-range technologies have been widely adopted. In fact, although low range technologies provide smaller data rates, they spend just a fraction of the energy of their higher-power counterparts. The timeliness requirements of data communications, in general, can be met by ensuring the availability of the medium for any station initiating a transmission. In controlled (close) environments this can be guaranteed, as there is a strict regulation of which stations are installed in the area and for which purpose. Nevertheless, in open environments, this is hard to control because no a priori abstract knowledge is available of which stations and technologies may contend for the medium at any given instant. Hence, the support of wireless real-time communications in unmanaged scenarios is a highly challenging task. Wireless low-power technologies have been the focus of a large research effort, for example, in the Wireless Sensor Network domain. Although bringing extended autonomy to battery powered stations, such technologies are known to be negatively influenced by similar technologies contending for the medium and, especially, by technologies using higher power transmissions over the same frequency bands. A frequency band that is becoming increasingly crowded with competing technologies is the 2.4 GHz Industrial, Scientific and Medical band, encompassing, for example, Bluetooth and ZigBee, two lowpower communication standards which are the base of several real-time protocols. Although these technologies employ mechanisms to improve their coexistence, they are still vulnerable to transmissions from uncoordinated stations with similar technologies or to higher power technologies such as Wi- Fi, which hinders the support of wireless dependable real-time communications in open environments. The Wireless Flexible Time-Triggered Protocol (WFTT) is a master/multi-slave protocol that builds on the flexibility and timeliness provided by the FTT paradigm and on the deterministic medium capture and maintenance provided by the bandjacking technique. This dissertation presents the WFTT protocol and argues that it allows supporting wireless real-time communication services with high dependability requirements in open environments where multiple contention-based technologies may dispute the medium access. Besides, it claims that it is feasible to provide flexible and timely wireless communications at the same time in open environments. The WFTT protocol was inspired on the FTT paradigm, from which higher layer services such as, for example, admission control has been ported. After realizing that bandjacking was an effective technique to ensure the medium access and maintenance in open environments crowded with contention-based communication technologies, it was recognized that the mechanism could be used to devise a wireless medium access protocol that could bring the features offered by the FTT paradigm to the wireless domain. The performance of the WFTT protocol is reported in this dissertation with a description of the implemented devices, the test-bed and a discussion of the obtained results.

Functional analysis of String/CDC25 phosphatase in post-mitotic neurons

Cell cycle and differentiation are two highly coordinated processes during organ development. Recent studies have demonstrated that core cell cycle regulators also play cell cycle-independent functions in post-mitotic neurons, and are essential for the maintenance of neuronal homeostasis. CDC25 phosphatases are well-established CDK activators and their activity is mainly associated to proliferating tissues. The expression and activity of mammalian CDC25s has been reported in adult brains. However, their physiological relevance and the potential substrates in a non-proliferative context have never been addressed. string (stg) encodes the Drosophila CDC25 homolog. Previous studies from our group showed that stg is expressed in photoreceptors (PRs) and in lamina neurons, which are two differentiated cell types that compose the fly visual system. The aims of this work are to uncover the function of stg and to identify its potential neuronal substrates, using the Drosophila visual system as a model. To gain insight into the function of stg in a non-dividing context we used the GAL4/UAS system to promote downregulation of stg in PR-neurons, through the use of an RNAi transgene. The defects caused by stg loss-of-function were evaluated in the developing eye imaginal disc by immunofluorescence, and during adult stages by scanning electron microscopy. This genetic approach was combined with a specific proteomic method, two-dimensional difference gel electrophoresis (2D-DIGE), to identify the potential substrates in PR-cells. Our results showed that stg downregulation in PRs affects the well-patterned retina organization, inducing the loss of apical maintenance of PR-nuclei on the eye disc, and ommatidia disorganization. We also detected an abnormal accumulation of cytoskeletal proteins and a disruption of the axon structure. As a consequence, the projection of PR-axons into the lamina and medulla neuropils of the optic lobe was impaired. Upon stg downregulation, we also detected that PR-cells accumulate Cyclin B. Although the rough eye phenotype observed upon stg downregulation suggests neurodegeneration, we did not detect neuronal death during larval stages, suggesting that it likely occurs during pupal stages or during adulthood. By 2D-DIGE, we identified seven proteins which were differentially expressed upon stg downregulation, and are potential neuronal substrates of Stg. Altogether, our observations suggest that Stg phosphatase plays an essential role in the Drosophila visual system neurons, regulating several cell components and processes in order to ensure their homeostasis.