Biomass fly ash incorporation in cement based materials

In recent years, pressures on global environment and energy security have led to an increasing demand on renewable energy sources, and diversification of Europe’s energy supply. Among these resources the biomass could exert an important role, since it is considered a renewable and CO2 neutral energy resource once the consumption rate is lower than the growth rate, and can potentially provide energy for heat, power and transports from the same installation. Currently, most of the biomass ash produced in industrial plants is either disposed of in landfill or recycled on agricultural fields or forest, and most times this goes on without any form of control. However, considering that the disposal cost of biomass ashes are raising, and that biomass ash volumes are increasing worldwide, a sustainable ash management has to be established. The main objective of the present study is the effect of biomass fly ashes in cement mortars and concretes in order to be used as a supplementary cementitious material. The wastes analyzed in the study were collected from the fluidized bed boilers and grate boilers available in the thermal power plants and paper pulp plants situated in Portugal. The physical as well as chemical characterisations of the biomass fly ashes were investigated. The cement was replaced by the biomass fly ashes in 10, 20 and 30% (weight %) in order to investigate the fresh properties as well as the hardened properties of biomass fly ash incorporated cement mortar and concrete formulations. Expansion reactions such as alkali silica reaction (ASR), sulphate attack (external and internal) were conducted in order to check the durability of the biomass fly ash incorporated cement mortars and concretes. Alternative applications such as incorporation in lime mortars and alkali activation of the biomass fly ashes were also attempted. The biomass fly ash particles were irregular in shape and fine in nature. The chemical characterization revealed that the biomass fly ashes were similar to a class C fly ash. The mortar results showed a good scope for biomass fly ashes as supplementary cementitious materials in lower dosages (<20%). The poor workability, concerns about the organic content, alkalis, chlorides and sulphates stand as the reasons for preventing the use of biomass fly ash in high content in the cement mortars. The results obtained from the durability tests have shown a clear reduction in expansion for the biomass fly ash mortars/concretes and the binder blend made with biomass fly ash (20%) and metakaolin (10%) inhibited the ASR reaction effectively. The biomass fly ash incorporation in lime mortars did not improve the mortar properties significantly though the carbonation was enhanced in the 15-20% incorporation. The biomass fly ash metakaolin blend worked well in the alkali activated complex binder application also. Portland cement free binders (with 30-40 MPa compressive strength) were obtained on the alkali activation of biomass fly ashes (60-80%) blended with metakaolin (20-40%).

Toxicogenomics of natural and anthropogenic effectors in eleutheroembryos

The introduction of chemicals into the environment by human activities may represent a serious risk to environmental and human health. Environmental risk assessment requires the use of efficient and sensitive tools to determine the impact of contaminants on the ecosystems. The use of zebrafish for the toxicity assessment of pharmaceuticals, drugs, and pollutants, is becoming well accepted due to zebrafish unique advantages for the screening of compounds for hazard identification. The aim of the present work is to apply toxicogenomic approaches to identify novel biomarkers and uncovered potential modes of action of classic and emergent contaminants able to disrupt endocrine systems, such as the Retinoic Acid Receptor, Retinoid X Receptor and the Aryl Hydrocarbon Receptor. This study relies on different nuclear and cytosolic protein receptors and other conditional (ligand- or stress- activated) transcriptional factors that are intimately involved in the regulation of defensome genes and in mechanisms of chemical toxicity. The transcriptomic effects of organic compounds, endogenous compounds, and nanoparticles were analysed during the early stages of zebrafish development. Studying the gene expression profiles of exposed and unexposed organisms to pollutants using microarrays allowed the identification of specific gene markers and to establish a "genetic code" for the tested compounds. Changes in gene expression were observed at toxicant concentrations that did not cause morphological effects. Even at low toxicant concentrations, the observed changes in transcript levels were robust for some target genes. Microarray responses of selected genes were further complemented by the real time quantitative polymerase chain reaction (qRT-PCR) methodology. The combination of bio-informatic, toxicological analyses of differential gene expression profiles, and biochemical and phenotypic responses across the treatments allowed the identification of uncovered potential mechanisms of action. In addition, this work provides an integrated set of tools that can be used to aid management-decision making by improving the predictive capability to measure environmental stress of contaminants in freshwater ecosystems. This study also illustrates the potential of zebrafish embryos for the systematic, large-scale analysis of chemical effects on developing vertebrates.