Diversity of Aeromonas species from different environments in Portugal

Espécies de Aeromonas encontram-se distribuídas por diferentes habitats, estando especialmente relacionadas com ambientes aquáticos. O seu papel em complicações na saúde humana e animal é reconhecido. De facto, não só pelo seu potencial de virulência, mas também pelos determinantes genéticos de resistência a antibióticos que possam conter, estes organismos constituem uma preocupação na medicina humana e veterinária. Assim, é essencial o estudo da diversidade de espécies de Aeromonas bem como explorar as suas características fenotípicas e genéticas que podem conduzir a impactos negativos. A água constitui um importante veículo de transmissão de microrganismos e espécies de Aeromonas estão amplamente distribuídas em águas tratadas e não tratadas. Em Portugal é ainda comum o consumo de águas não tratadas cuja qualidade, na maioria das vezes, não é sujeita a monitorização, como acontece por exemplo, em explorações agrícolas de gestão familiar. Neste estudo, investigou-se a presença de Aeromonas em águas não tratadas para consumo. Estabeleceu-se também uma linha horizontal de colheitas de diferentes amostras de origem agrícola com o intuito de avaliar a possibilidade de a água ser uma das vias de contaminação de culturas agrícolas e animais por espécies de Aeromonas. Obtiveram-se 483 isolados que foram discriminados por RAPD-PCR. 169 estirpes distintas foram identificadas ao nível da espécie por análise filogenética baseada no gene gyrB. Verificou-se uma frequente ocorrência bem como uma diversidade considerável de espécies de Aeromonas. Em alguns casos, as relações genotípicas entre isolados de diferentes amostras eram muito próximas. Adicionalmente, a maioria das amostras continha diferentes espécies e estirpes distintas da mesma espécie. A. media e A. hydrophila foram as espécies mais ocorrentes. Um grupo de isolados apresentou variantes moleculares de gyrB diferente das conhecidas até agora, o que indica que poderão constituir espécies não descritas. O perfil de susceptibilidade da colecção de Aeromonas a diferentes antibióticos foi estabelecido, constituindo um perfil típico do género, com algumas excepções. Estirpes multirresistentes foram encontradas. A presença de genes tet e bla foi investigada por estudos de PCR, hibridação e, em alguns casos, de sequenciação. Como era esperado, cphA/imiS foi o mais detectado. A detecção de integrões fez-se por PCR e hibridação e a sua caracterização foi feita por sequenciação de DNA; a sua ocorrência foi reduzida. A maioria das estirpes sintetizou enzimas extracelulares com actividade lipolítica e proteolítica que potencialmente contribuem para virulência. A análise por PCR e hibridação permitiram a detecção de vários determinantes genéticos que codificam moléculas possivelmente envolvidas em processos patogénicos. Diversas espécies de Aeromonas apresentando características relacionadas com resistência a antibióticos e potencialmente de virulência estão frequentemente presentes em produtos para consumo humano e animal em Portugal. ABSTRACT: Aeromonas spp. are present in a wide range of ecological niches, being mainly related to aquatic environments. Their role in human and animal health complications is recognised. In fact, not only for their putative virulence but also for the antibiotic resistance genetic determinants Aeromonas may harbour, these organisms constitute an issue of concern in human and veterinary medicine. Thus, it is essential to get knowledge on Aeromonas sp. diversity and on their genotypic and phenotypic characteristics that may lead to negative impacts. Water constitutes a good contamination route for microorganisms and Aeromonas are widespread in untreated and treated waters from different sources. In Portugal there is still an extensive use of untreated water which is not regularly monitored for quality. This is often the case in family smallholding farms. In this study untreated drinking and mineral waters were assessed for their content in Aeromonas spp. Furthermore, a sampling scheme was designed to investigate the occurrence and diversity of Aeromonas sp. in different agricultural correlated sources and to assess the possibility of water being the transmission vehicle between those sources. 483 isolates were obtained and discriminated by RAPD-PCR. Identification at the species level for 169 distinct strains was done by gyrB based phylogenetic analysis. Results demonstrated the frequent occurrence and considerable diversity of Aeromonas spp. In some cases, genotypic close relations were found between isolates from different sources. Also, most samples contained different species and distinct strains of the same species. A. media and A. hydrophila were the most occurring. A group of isolates displayed gyrB gene sequences distinct from the previously known, indicating that they may constitute representatives of non-described species. The antibiotic susceptibility profile of the aeromonads collection was established and constituted a typical profile of the genus, although few exceptions. Multiresistance patterns were found. The presence of tet and bla genes was investigated by PCR, hybridisation and, in some cases, sequencing analysis. As expected, cphA/imiS was the most detected. Integrons were screened by PCR and hybridisation and characterised by DNA sequencing; low occurrence was recorded. The bulk of strains was able to produce extracellular enzymes with lipolytic and proteolytic activities, which may contribute to virulence. PCR and hybridisation surveys allowed the detection of distinct genetic determinants coding for molecules putatively involved in pathogenic processes. Diverse Aeromonas sp. presenting distinct antibiotic resistance features and putative virulence traits are frequently present in many sources for human and animal consumption in Portugal.

Molecular diversity and transferability of integrons from wastewaters

Na evolução bacteriana, a capacidade de explorar novos ambientes e de responder a diferentes pressões selectivas deve-se principalmente à aquisição de novos genes por transferência horizontal. Integrões são elementos genéticos bacterianos que constituem sistemas naturais de captura e expressão de cassetes de genes, sendo um dos principais mecanismos bacterianos envolvidos na aquisição de resistências a antibióticos. Estudos recentes suportam a hipótese de que os ambientes naturais constituem importantes reservatórios de integrões e cassetes de genes. Uma vez que as águas residuais são descarregadas em receptores naturais, torna-se fundamental conhecer a presença e dispersão de integrões nestes ambientes, assim como a sua associação a outros elementos genéticos móveis e a genes de resistências a antibióticos. Neste trabalho, pretendeu-se avaliar a prevalência e diversidade de integrões em águas residuais de origem animal e doméstica, bem como a sua associação a plasmídeos conjugativos, usando metodologias dependentes e independentes do cultivo de microrganismos em laboratório. Os resultados obtidos sustentam assim a hipótese de que ambientes particularmente ricos em matéria orgânica, como é o caso das águas residuais, constituem ambientes propícios à presença de integrões e à ocorrência de transferência horizontal de genes de resistência a antibióticos, embora a sua prevalência e diversidade seja influenciada pelo tipo de efluente em questão. A presença de integrões em estações de tratamento de águas residuais, e em especial nos efluentes tratados, constitui assim um factor preocupante, uma vez que tal contribui para a sua disseminação e dispersão por outros ecossistemas aquáticos, nomeadamente rios e mares. Os métodos utilizados permitiram também detectar uma elevada diversidade de cassetes de genes associadas a integrões, sendo possível que algumas dessas sequências codifiquem para proteínas que desempenhem um importante papel na adaptação bacteriana às intensas pressões selectivas características deste tipo de ambientes. Assim, é possível concluir que as comunidades bacterianas presentes em águas residuais reúnem diferentes tipos de elementos geneticamente móveis que desempenham um importante papel não só na adaptação bacteriana, mas também na disseminação de determinantes genéticos de resistência para ambientes naturais. Adicionalmente, a presença de potenciais proteínas com possíveis aplicações biotecnológicas reforça a importância das águas residuais como fontes de diversidade funcional. Este trabalho incluiu também a criação e implementação da base de dados INTEGRALL, desenvolvida com o intuito de congregar informação acerca de integrões e de uniformizar a nomenclatura de cassetes de genes.

Persistent luminescence of SrAl2O4:Ce(III), Dy, Eu nanotubes, nanowires and core-shells for people with disabilities: nano-emergency

Este estudo transversal está focado na propriedade de luminescência persistente do aluminato de estrôncio co-dopado com cério (III), disprósio (III) e európio (II), SrAl2O4:Ce3+, Dy3+, Eu2+, em sistemas de sinalização de áreas de risco e emergências para pessoas com deficiências. Na área da ciência e engenharia dos materiais, foram desenvolvidos novos materiais com características nanométricas, nanotubos, nanoarames e nanobastões luminescentes de SrAl2O4:Ce3+, Dy3+, Eu2+ para aplicações na área da reabilitação e acessibilidade de pessoas com deficiências. Os nanotubos foram obtidos a partir de micro- e nano-partículas precursoras sintetizadas por reacção do estado-sólido e tratamento térmico de recozedura (1273-1473 K). Os nanoarames e nanobastões foram preparados por moagem, sonificação e recozedura (373 K). Novas nanocápsulas de aluminatos luminescentes dopados com cério (III) e encapsulados com TiO2 foram criadas de modo a obter-se materiais multifuncionais, designadamente com acção fotocatalítica antimicrobiana, antibacteriana e resistência à água. Tais aluminatos podem ser amplamente aplicados como superfícies higiénicas, auto-limpantes, em biomateriais, no domínio de medicamentos antibióticos, na formulação de vacinas, e com ênfase à aplicação em cerâmicas fotoluminescentes. As metodologias de obtenção de tais nanoestruturas de aluminato de estrôncio dopado com cério (III) e do seu encapsulamento, desenvolvidas no âmbito desta tese, são aplicáveis a diversos aluminatos dopados com outros iões lantanídeos (Ln consiste em La, Ce, Pr, Nd, Pm, Sm, Eu, Gd, Tb, Dy, Ho, Er, Yb, Tm ou Lu) com a fórmula M(1-x-y)N2O4:Cex, Lny, onde M é Be, Mg, Ca, Sr ou Ba. Na área da oftalmologia, foi desenvolvido um equipamento médico para o diagnóstico de biofuncionalidade das células retinais fotoreceptoras, e como suporte à telemedicina oftalmológica. Este equipamento foi utilizado para realizar testes de visão cromática FM100HUE em fundo branco/preto para a personalização de materiais luminescentes. Os resultados demonstraram uma biofuncionalidade celular à visibilidade fotópica das cores em fundo preto superior no grupo de tratamento, composto por pessoas com retinopatia diabética (n=38), em comparação ao grupo de referência (n=38). Estes resultados sugerem a recomendação de materiais com fotoluminescência persistente (λem=485-555 nm), incluindo SrAl2O4:Ce3+, Dy3+, Eu2+, para o referido grupo de tratamento, em sinalização de emergência e em ambientes de baixa iluminação. Na área da arquitectura, foi proposta uma nova aplicação dos referidos nanomateriais luminescentes à base de SrAl2O4:Ce3+, Dy3+, Eu2+ em cerâmica de revestimento, tendo em vista a sua boa visibilidade e uso por pessoas com deficiências. Novos pavimentos, cerâmicos, fotoluminescentes, foram desenhados com propriedades multisensoriais (contraste táctil, sonoro e visual) e antimicrobianas, para pessoas portadoras de deficiências utilizarem, no escuro, com a prioridade de salvar vidas em emergências. Tais pisos, com relevos, podem ser combinados de modo a compor um sistema exclusivo de sinalização fotoluminescente multisensorial que possibilita a rápida evacuação mediante o uso de auxílios de mobilidade (e.g. bengala, cadeira de rodas, andadores, muletas). A solução integrada de tais inovações que potencializa a propriedade de luminescência persistente de SrAl2O4:Ce3+, Dy3+, Eu2+ de modo acessível para as pessoas com deficiências, pode contribuir para salvar vidas, no escuro, em emergências.

Transient transpiration radiometer : development of a heat flux sensor for high aggressivity environments

The development of a new instrument for the measurement of convective and radiative is proposed, based on the transient operation of a transpiration radiometer. Current transpiration radiometers rely on steady state temperature measurements in a porous element crossed by a know gas mass flow. As a consequence of the porous sensing element’s intrinsically high thermal inertia, the instrument’s time constant is in the order of several seconds. The proposed instrument preserves established advantages of transpiration radiometers while incorporating additional features that broaden its applicability range. The most important developments are a significant reduction of the instrument’s response time and the possibility of separating and measuring the convective and radiative components of the heat flux. These objectives are achieved through the analysis of the instrument’s transient response, a pulsed gas flow being used to induce the transient behavior.

Cooperative positioning for heterogeneous wireless systems

Future emerging market trends head towards positioning based services placing a new perspective on the way we obtain and exploit positioning information. On one hand, innovations in information technology and wireless communication systems enabled the development of numerous location based applications such as vehicle navigation and tracking, sensor networks applications, home automation, asset management, security and context aware location services. On the other hand, wireless networks themselves may bene t from localization information to improve the performances of di erent network layers. Location based routing, synchronization, interference cancellation are prime examples of applications where location information can be useful. Typical positioning solutions rely on measurements and exploitation of distance dependent signal metrics, such as the received signal strength, time of arrival or angle of arrival. They are cheaper and easier to implement than the dedicated positioning systems based on ngerprinting, but at the cost of accuracy. Therefore intelligent localization algorithms and signal processing techniques have to be applied to mitigate the lack of accuracy in distance estimates. Cooperation between nodes is used in cases where conventional positioning techniques do not perform well due to lack of existing infrastructure, or obstructed indoor environment. The objective is to concentrate on hybrid architecture where some nodes have points of attachment to an infrastructure, and simultaneously are interconnected via short-range ad hoc links. The availability of more capable handsets enables more innovative scenarios that take advantage of multiple radio access networks as well as peer-to-peer links for positioning. Link selection is used to optimize the tradeo between the power consumption of participating nodes and the quality of target localization. The Geometric Dilution of Precision and the Cramer-Rao Lower Bound can be used as criteria for choosing the appropriate set of anchor nodes and corresponding measurements before attempting location estimation itself. This work analyzes the existing solutions for node selection in order to improve localization performance, and proposes a novel method based on utility functions. The proposed method is then extended to mobile and heterogeneous environments. Simulations have been carried out, as well as evaluation with real measurement data. In addition, some speci c cases have been considered, such as localization in ill-conditioned scenarios and the use of negative information. The proposed approaches have shown to enhance estimation accuracy, whilst signi cantly reducing complexity, power consumption and signalling overhead.

Dependable wireless real-time communications for open environments

Wireless communication technologies have become widely adopted, appearing in heterogeneous applications ranging from tracking victims, responders and equipments in disaster scenarios to machine health monitoring in networked manufacturing systems. Very often, applications demand a strictly bounded timing response, which, in distributed systems, is generally highly dependent on the performance of the underlying communication technology. These systems are said to have real-time timeliness requirements since data communication must be conducted within predefined temporal bounds, whose unfulfillment may compromise the correct behavior of the system and cause economic losses or endanger human lives. The potential adoption of wireless technologies for an increasingly broad range of application scenarios has made the operational requirements more complex and heterogeneous than before for wired technologies. On par with this trend, there is an increasing demand for the provision of cost-effective distributed systems with improved deployment, maintenance and adaptation features. These systems tend to require operational flexibility, which can only be ensured if the underlying communication technology provides both time and event triggered data transmission services while supporting on-line, on-the-fly parameter modification. Generally, wireless enabled applications have deployment requirements that can only be addressed through the use of batteries and/or energy harvesting mechanisms for power supply. These applications usually have stringent autonomy requirements and demand a small form factor, which hinders the use of large batteries. As the communication support may represent a significant part of the energy requirements of a station, the use of power-hungry technologies is not adequate. Hence, in such applications, low-range technologies have been widely adopted. In fact, although low range technologies provide smaller data rates, they spend just a fraction of the energy of their higher-power counterparts. The timeliness requirements of data communications, in general, can be met by ensuring the availability of the medium for any station initiating a transmission. In controlled (close) environments this can be guaranteed, as there is a strict regulation of which stations are installed in the area and for which purpose. Nevertheless, in open environments, this is hard to control because no a priori abstract knowledge is available of which stations and technologies may contend for the medium at any given instant. Hence, the support of wireless real-time communications in unmanaged scenarios is a highly challenging task. Wireless low-power technologies have been the focus of a large research effort, for example, in the Wireless Sensor Network domain. Although bringing extended autonomy to battery powered stations, such technologies are known to be negatively influenced by similar technologies contending for the medium and, especially, by technologies using higher power transmissions over the same frequency bands. A frequency band that is becoming increasingly crowded with competing technologies is the 2.4 GHz Industrial, Scientific and Medical band, encompassing, for example, Bluetooth and ZigBee, two lowpower communication standards which are the base of several real-time protocols. Although these technologies employ mechanisms to improve their coexistence, they are still vulnerable to transmissions from uncoordinated stations with similar technologies or to higher power technologies such as Wi- Fi, which hinders the support of wireless dependable real-time communications in open environments. The Wireless Flexible Time-Triggered Protocol (WFTT) is a master/multi-slave protocol that builds on the flexibility and timeliness provided by the FTT paradigm and on the deterministic medium capture and maintenance provided by the bandjacking technique. This dissertation presents the WFTT protocol and argues that it allows supporting wireless real-time communication services with high dependability requirements in open environments where multiple contention-based technologies may dispute the medium access. Besides, it claims that it is feasible to provide flexible and timely wireless communications at the same time in open environments. The WFTT protocol was inspired on the FTT paradigm, from which higher layer services such as, for example, admission control has been ported. After realizing that bandjacking was an effective technique to ensure the medium access and maintenance in open environments crowded with contention-based communication technologies, it was recognized that the mechanism could be used to devise a wireless medium access protocol that could bring the features offered by the FTT paradigm to the wireless domain. The performance of the WFTT protocol is reported in this dissertation with a description of the implemented devices, the test-bed and a discussion of the obtained results.

Sustainable viticulture in Bairrada appellation: vineyard and harvest year effects on grapes oenological potential

The sustainable viticulture of a region passes, among other aspects, for maximizing the varieties potential minimizing subsequent interventions during winemaking, which should contribute to the production of quality wines maintaining their typicity and rationalizing costs. The detailed knowledge of each Appellation specificities, namely vineyard parcel (soil type and topographical peculiarities) and harvest climatic conditions is crucial for sustainability in this sector. Thus, in line with this current trend, the starting point for the development of this PhD thesis was to evaluate the oenological potential of different varieties cultivated throughout Bairrada Appellation (Portugal). During maturation several changes in grape varieties occur, namely berries become sweeter, less acidic, and they develop flavour, aroma and colour properties. The development of these characteristics is essential to define grapes oenological potential, i.e. to estimate the possibility of their usage to produce specific wines. A three years sampling plan was designed to evaluate the effect of harvest year and parcel characteristics on V. vinifera cv. Arinto, Bical, Sauvignon Blanc, Baga, Castelão, Touriga Nacional, and Sousão grapes composition. For each variety, 3 parcels with different characteristics were selected. Several physicochemical parameters were evaluated, during maturation: berry weight, pH, titratable acidity, sugar and phenolic contents, antiradical activity, and volatile composition (free fraction). Special attention was devoted to grapes at technologic maturity, since, besides these parameters, glycosidically-linked fraction was also considered. By using the results obtained at technologic maturity, a comprehensive approach was applied to identify the significance of harvest and parcel characteristics effects on each variety composition. Considering all the parameters under study, it may be highlighted some significant differences. According to the obtained results determined during maturation, it was possible to conclude that Arinto, Bical and Sauvignon Blanc grapes from parcels with clay-sandy and clay-calcareous soils have higher phenolic content and antiradical activity. Otherwise, Sauvignon Blanc presented similar volatile composition for grapes cultivated in the 3 parcels, while Arinto and Bical exhibited higher volatile content in grapes from claysandy and clay-calcareous soils. For Baga, Castelão and Touriga Nacional red varieties, grapes with higher phenolic content, antiradical activity, and volatile content were obtained from clayey and clay-calcareous soils. Furthermore, for Touriga Nacional, parcels altitude seems also to modulate grapes composition. Beyond parcel effect, harvest year conditions also influence grapes composition: 2011 harvest was related with lower phenolic and volatile contents, as well as lower antiradical activity.For grapes collected at technologic maturity, analysis of variance-simultaneous component analysis (ASCA) was applied combining all the parameters under study, in order to assess the influence of harvest and parcel characteristics on each variety oenological potential. The results obtained using this comprehensive approach is closely related with those observed during maturation and revealed that harvest was the main factor that influenced grapes composition (53% to 68% of the total data set variance) followed by parcel characteristics, explaining ca. 15-19% of the total data set variance. The oenological potential of each variety may be different from one parcel to another, i.e., clay-sandy and clay-calcareous related-environments seem to favour Arinto and Bical white grapes composition, but for the red varieties, grapes composition was favoured by clayey and clay-calcareous soils. Besides, also higher altitude seems to favour Touriga Nacional grapes composition. Sauvignon Blanc seems to be a variety well adapted to the different parcel characteristics. In order to go forward in the valuation of these varieties, the aroma properties of 6 monovarietal wines were studied based on an aroma network-approach, linking molecular data related to volatile composition and aroma data about the key odor active molecules. This approach allowed to identify different wine aroma properties and to infer about the consumer’s sensory perception. It was found that aroma properties differ from one wine variety to another: while Arinto and Sauvignon Blanc wine exhibited higher tree fruity, sweety and flowery aromas, related essentially with ester compounds and C13 norisoprenoids, the opposite was obtained for Bical wine, corroborating the aroma sensory perceptions of the trained panel. Sauvignon Blanc also exhibited higher toasted aromas (related with thiols, mainly with 2-methyl-3-furanthiol). Touriga Nacional red wine exhibited higher tree, tropical, and berry fruits notes (sensory described as sweet fruits), toasted and flowery aromas, while these are similar for the other red wines under study. Besides Portuguese Bairrada wines, this aroma network approach is a tool that can be used to explain the aroma properties of wines worldwide. The grape and wine data generated under the present PhD thesis, in the context of Bairrada Appellation, shows the unique character of each variety, and may be used by growers and wine producers as a support for decisionmaking based on objective criteria, increasing the sustainability in this sector. For instance, it is possible to take advantage of the natural resources and produce products with different characteristics obtained from the same variety, minimizing costs during the winemaking process.

Assessing the effectiveness of chemical treatment with nanomaterials in improving the quality of different industrial effluents

Industrial activities are the major sources of pollution in all environments. Depending on the type of industry, various levels of organic and inorganic pollutants are being continuously discharged into the environment. Although, several kinds of physical, chemical, biological or the combination of methods have been proposed and applied to minimize the impact of industrial effluents, few have proved to be totally effective in terms of removal rates of several contaminants, toxicity reduction or amelioration of physical and chemical properties. Hence, it is imperative to develop new and innovative methodologies for industrial wastewater treatment. In this context nanotechnology arises announcing the offer of new possibilities for the treatment of wastewaters mainly based on the enhanced physical and chemical proprieties of nanomaterials (NMs), which can remarkably increase their adsorption and oxidation potential. Although applications of NMs may bring benefits, their widespread use will also contribute for their introduction into the environment and concerns have been raised about the intentional use of these materials. Further, the same properties that make NMs so appealing can also be responsible for producing ecotoxicological effects. In a first stage, with the objective of selecting NMs for the treatment of organic and inorganic effluents we first assessed the potential toxicity of nanoparticles of nickel oxide (NiO) with two different sizes (100 and 10-20 nm), titanium dioxide (TiO2, < 25 nm) and iron oxide (Fe2O3, ≈ 85x425 nm). The ecotoxicological assessment was performed with a battery of assays using aquatic organisms from different trophic levels. Since TiO2 and Fe2O3 were the NMs that presented lower risks to the aquatic systems, they were selected for the second stage of this work. Thus, the two NMs pre-selected were tested for the treatment of olive mill wastewater (OMW). They were used as catalyst in photodegradation systems (TiO2/UV, Fe2O3/UV, TiO2/H2O2/UV and Fe2O3/H2O2/UV). The treatments with TiO2 or Fe2O3 combined with H2O2 were the most efficient in ameliorating some chemical properties of the effluent. Regarding the toxicity to V. fischeri the highest reduction was recorded for the H2O2/UV system, without NMs. Afterwards a sequential treatment using photocatalytic oxidation with NMs and degradation with white-rot fungi was applied to OMW. This new approach increased the reduction of chemical oxygen demand, phenolic content and ecotoxicity to V. fischeri. However, no reduction in color and aromatic compounds was achieved after 21 days of biological treatment. The photodegradation systems were also applied to treat the kraft pulp mill and mining effluents. For the organic effluent the combination NMs and H2O2 had the best performances in reduction the chemical parameters as well in terms of toxicity reduction. However, for the mine effluent the best (TiO2/UV and Fe2O3/UV) were only able to significantly remove three metals (Zn, Al and Cd). Nonetheless the treatments were able of reducing the toxicity of the effluent. As a final stage, the toxicity of solid wastes formed during wastewater treatment with NMs was assessed with Chironomus riparius larvae, a representative species of the sediment compartment. Certain solid wastes showed the potential to negatively affect C. riparius survival and growth, depending on the type of effluent treated. This work also brings new insights to the use of NMs for the treatment of industrial wastewaters. Although some potential applications have been announced, many evaluations have to be performed before the upscaling of the chemical treatments with NMs.

Integrated coastal geoengineering approach for maritime environments

This dissertation introduces several methodological approaches which integrate a proposed coastal management model in an interdisciplinary perspective. The research presented herein is displayed as a set of publications comprising different thematic outlooks. The thesis develops an integrated coastal geoengineering approach which is intrinsically linked to the studied maritime environments. From sandy coasts and marine works to rocky platforms and sea cliffs, this study includes field work between Caminha – Figueira da Foz (NW Portugal) and Galicia (NW Spain). The research also involves an analysis and geological-geotechnical characterisation of natural rock (armourstone) and artificial units (concrete blocks) applied to coastal structures. The main goal is to contribute to the characterisation and re-evaluation of georesources and to determine armourstone suitability and availability from its source (quarry). It was also important to diagnose the geomaterials in situ concerning their degradation/deterioration level on the basis of the current status of the coastal protection works in order to facilitate more efficient monitoring and maintenance, with economic benefits. In the rocky coast approach the coastal blocks were studied along the platform, but also the geoforms were studied from a coastal morphodynamics point of view. A shoreline evolution analysis was developed for sandy coasts through Digital Shoreline Analysis System (DSAS) extension. In addition, the spatial and statistical analysis applied to sea cliffs allowed the establishment of susceptibility zones to erosion and hazardous areas. All of these studies have different purposes and results however, there is a common denominator – GIS mapping. Hence, apart from the studied coastal environment, there is an integrated system which includes a sequence of procedures and methodologies that persisted during the research period. This is a step forward in the study of different coastal environments by using almost the same methodologies. This will allow the characterisation, monitoring and assessment of coastal protection works, rocky coasts, and shore platforms. With such data, it is possible to propose or recommend strategies for coastal and shoreline management based on several justifications in terms of social, economic, and environmental questions, or even provide a GIS-based planning support system reinforced by geocartographic decisions. Overall the development of the applied cartography embraces six stages which will allow the production of detailed maps of the maritime environment: (1) high-resolution aerial imagery surveys; (2) visual inspection and systematic monitoring; (3) applied field datasheet; (4) in situ evaluation; (5) scanline surveying; and (6) GIS mapping. This thesis covers fundamental matters that were developed over the course of scientific publication and as a consequence they represent the results obtained and discussed. The subjects directly related to the thesis architecture are: (i) cartography applied to coastal dynamics (including an art historical analysis as a tool to comprehend the coastal evolution and the littoral zone); (ii) georesources assessment (the role of cartography in georesources zoning, assessment and armourstone durability); (iii) coastal geoengineering applications and monitoring (Espinho pilot site in NW Portugal as an experimental field); (iv) rocky coast and shore platform studies and characterisation; (v) sandy and mixed environment approaches; (vi) coastal geosciences GIS mapping and photogrammetric surveying (coastal geoengineering); and (vii) shoreline change mapping and coastal management strategies (the CartGalicia Project as an example – NW Spain). Finally, all of these thematic areas were crucial to generate the conceptual models proposed and to shape the future of integrated coastal coastal geoengineering management.