Regulation of single exocytotic events by the cAMP signaling pathway

Permanece por esclarecer como a via de sinalização do cAMP modula a exocitose regulada. Os principais objetivos deste trabalho foram: i) avaliar o efeito do cAMP nos eventos exocitóticos, nas propriedades dos poros de fusão e na secreção hormonal; ii) perceber o impacto da sinalização por cAMP-HCN na exocitose e nas propriedades do poro de fusão; e iii) estudar as propriedades do poro de fusão na presença de um agente neurotóxico comum, como o alumínio. Lactotrofos, isolados a partir da hipófise anterior de ratos Wistar machos, foram usados como modelo celular. Os eventos unitários de fusão exocitótica e a prolactina (PRL) libertada foram avaliados, respetivamente, em ensaios eletrofisiológicos efectuados segundo a técnica de contacto hermético no modo sobre a célula aderida à pipeta porta-elétrodo e com recurso a métodos imunológicos de deteção. Os níveis intracelulares de cAMP foram aumentados por 3-isobutil-1-metilxantina (IMBX), forscolina e N6,2'-O-dibutiril adenosina- 3',5'-monofosfato cíclico (dbcAMP). A expressão dos canais HCN foi determinada por Western-blot, qRT-PCR e imunocitoquímica em combinação com microscopia confocal. Culturas primárias de lactotrofos foram também transfetadas com DNA plasmídico que codifica HCN2 juntamente com a proteína-verde-fluorescente e um agente farmacológico foi usado para avaliar o efeito de cAMP-HCN na exocitose. Observou-se que os lactotrofos responderam à forscolina e ao dbcAMP libertando PRL de um modo bifásico e dependente da concentração, uma vez que a secreção aumentou e diminuiu, respectivamente, na gama de baixas e altas concentrações. Os compostos que elevaram os níveis de cAMP aumentaram os eventos transientes e impediram a fusão completa. Além disso, o dbcAMP promoveu o aparecimento de eventos exocitóticos transientes de elevada periodicidade, cujos poros de fusão, de maior diâmetro, se mativeram abertos durante mais tempo. A expressão das quatro isoformas de HCN foi confirmada nos lactotrofos ao nível do mRNA e, tal como no coração, rim e hipófise, o mais abundante codifica a isoforma HCN2. Nos lactotrofos com sobre-expressão desta isoforma, o dbcAMP não só aumentou a frequência dos eventos transientes e a condutância dos poros, mas também a frequência dos eventos de fusão completa. Enquanto o bloqueador dos canais HCN, ZD7288, reduziu a frequência dos eventos transientes e de fusão completa desencadeados por dbcAMP e diminuiu o diâmetro dos poros de fusão. A simultânea diminuição da libertação de PRL, da frequência dos eventos transientes e do diâmetro dos poros de fusão representaram as principais alterações observados após pré-tratamento dos lactotrofos com concentração micromolar de alumínio. Em conclusão, os resultados demonstram que elevados níveis de cAMP reduzem a secreção de PRL devido à estabilização dos poros de fusão no estado de maior abertura. Além disso, a via de sinalização cAMP-HCN afecta a actividade exocitótica e modifica as propriedades dos poros de fusão, que parecem ser igualmente importantes na citotoxicidade induzida por alumínio.

Extension of electrochemically active sites in SOFCs and SOECs

Solid oxide fuel (SOFCs) and electrolyzer (SOECs) cells have been promoted as promising technologies for the stabilization of fuel supply and usage in future green energy systems. SOFCs are devices that produce electricity by the oxidation of hydrogen or hydrocarbon fuels with high efficiency. Conversely, SOECs can offer the reverse reaction, where synthetic fuels can be generated by the input of renewable electricity. Due to this similar but inverse nature of SOFCs and SOECs, these devices have traditionally been constructed from comparable materials. Nonetheless, several limitations have hindered the entry of SOFCs and SOECs into the marketplace. One of the most debilitating is associated with chemical interreactions between cell components that can lead to poor longevities at high working temperatures and/or depleted electrochemcial performance. Normally such interreactions are countered by the introduction of thin, purely ionic conducting, buffer layers between the electrode and electrolyte interface. The objective of this thesis is to assess if possible improvements in electrode kinetics can also be obtained by modifying the transport properties of these buffer layers by the introduction of multivalent cations. The introduction of minor electronic conductivity in the surface of the electrolyte material has previously been shown to radically enhance the electrochemically active area for oxygen exchange, reducing polarization resistance losses. Hence, the current thesis aims to extend this knowledge to tailor a bi-functional buffer layer that can prevent chemical interreaction while also enhancing electrode kinetics.The thesis selects a typical scenario of an yttria stabilized zirconia electrolyte combined with a lanthanide containing oxygen electrode. Gadolinium, terbium and praseodymium doped cerium oxide materials have been investigated as potential buffer layers. The mixed ionic electronic conducting (MIEC) properties of the doped-cerium materials have been analyzed and collated. A detailed analysis is further presented of the impact of the buffer layers on the kinetics of the oxygen electrode in SOFC and SOEC devices. Special focus is made to assess for potential links between the transport properties of the buffer layer and subsequent electrode performance. The work also evaluates the electrochemical performance of different K2NiF4 structure cathodes deposited onto a peak performing Pr doped-cerium buffer layer, the influence of buffer layer thickness and the Pr content of the ceria buffer layer. It is shown that dramatic increases in electrode performance can be obtained by the introduction of MIEC buffer layers, where the best performances are shown to be offered by buffer layers of highest ambipolar conductivity. These buffer layers are also shown to continue to offer the bifunctional role to protect from unwanted chemical interactions at the electrode/electrolyte interface.

Challenges in mercury speciation and fractionation in soil and sediment

This investigation focused on the development, test and validation of methodologies for mercury fractionation and speciation in soil and sediment. After an exhaustive review of the literature, several methods were chosen and tested in well characterised soil and sediment samples. Sequential extraction procedures that divide mercury fractions according to their mobility and potential availability in the environment were investigated. The efficiency of different solvents for fractionation of mercury was evaluated, as well as the adequacy of different analytical instruments for quantification of mercury in the extracts. Kinetic experiments to establish the equilibrium time for mercury release from soil or sediment were also performed. It was found that in the studied areas, only a very small percentage of mercury is present as mobile species and that mobility is associated to higher aluminium and manganese contents, and that high contents of organic matter and sulfur result in mercury tightly bound to the matrix. Sandy soils tend to release mercury faster that clayey soils, and therefore, texture of soil or sediment has a strong influence on the mobility of mercury. It was also understood that analytical techniques for quantification of mercury need to be further developed, with lower quantification limits, particularly for mercury quantification of less concentrated fractions: water-soluble e exchangeable. Although the results provided a better understanding of the distribution of mercury in the sample, the complexity of the procedure limits its applicability and robustness. A proficiency-testing scheme targeting total mercury determination in soil, sediment, fish and human hair was organised in order to evaluate the consistency of results obtained by different laboratories, applying their routine methods to the same test samples. Additionally, single extractions by 1 mol L-1 ammonium acetate solution, 0.1 mol L-1 HCl and 0.1 mol L-1 CaCl2, as well as extraction of the organometallic fraction were proposed for soil; the last was also suggested for sediment and fish. This study was important to update the knowledge on analytical techniques that are being used for mercury quantification, the associated problems and sources of error, and to improve and standardize mercury extraction techniques, as well as to implement effective strategies for quality control in mercury determination. A different, “non chemical-like” method for mercury species identification was developed, optimised and validated, based on the thermo-desorption of the different mercury species. Compared to conventional extraction procedures, this method has advantages: it requires little to no sample treatment; a complete identification of species present is obtained in less than two hours; mercury losses are almost neglectable; can be considered “clean”, as no residues are produced; the worldwide comparison of results obtained is easier and reliable, an important step towards the validation of the method. Therefore, the main deliverables of this PhD thesis are an improved knowledge on analytical procedures for identification and quantification of mercury species in soils and sediments, as well as a better understanding of the factors controlling the behaviour of mercury in these matrices.

Perception and software architecture for mobile robotics

When developing software for autonomous mobile robots, one has to inevitably tackle some kind of perception. Moreover, when dealing with agents that possess some level of reasoning for executing their actions, there is the need to model the environment and the robot internal state in a way that it represents the scenario in which the robot operates. Inserted in the ATRI group, part of the IEETA research unit at Aveiro University, this work uses two of the projects of the group as test bed, particularly in the scenario of robotic soccer with real robots. With the main objective of developing algorithms for sensor and information fusion that could be used e ectively on these teams, several state of the art approaches were studied, implemented and adapted to each of the robot types. Within the MSL RoboCup team CAMBADA, the main focus was the perception of ball and obstacles, with the creation of models capable of providing extended information so that the reasoning of the robot can be ever more e ective. To achieve it, several methodologies were analyzed, implemented, compared and improved. Concerning the ball, an analysis of ltering methodologies for stabilization of its position and estimation of its velocity was performed. Also, with the goal keeper in mind, work has been done to provide it with information of aerial balls. As for obstacles, a new de nition of the way they are perceived by the vision and the type of information provided was created, as well as a methodology for identifying which of the obstacles are team mates. Also, a tracking algorithm was developed, which ultimately assigned each of the obstacles a unique identi er. Associated with the improvement of the obstacles perception, a new algorithm of estimating reactive obstacle avoidance was created. In the context of the SPL RoboCup team Portuguese Team, besides the inevitable adaptation of many of the algorithms already developed for sensor and information fusion and considering that it was recently created, the objective was to create a sustainable software architecture that could be the base for future modular development. The software architecture created is based on a series of di erent processes and the means of communication among them. All processes were created or adapted for the new architecture and a base set of roles and behaviors was de ned during this work to achieve a base functional framework. In terms of perception, the main focus was to de ne a projection model and camera pose extraction that could provide information in metric coordinates. The second main objective was to adapt the CAMBADA localization algorithm to work on the NAO robots, considering all the limitations it presents when comparing to the MSL team, especially in terms of computational resources. A set of support tools were developed or improved in order to support the test and development in both teams. In general, the work developed during this thesis improved the performance of the teams during play and also the e ectiveness of the developers team when in development and test phases.