Methodologies for a sustainable development of estuarine ecosystems

As zonas costeiras, estuarinas e lagunares são consideradas áreas muito produtivas e dotadas de grande biodiversidade sendo, por isso, consideradas de elevado valor ecológico e económico. No entanto, nas últimas décadas tem vindo a verificar-se um aumento da contaminação destes ecossistemas como resultado de diversas actividades antrópicas. As abordagens actualmente disponíveis para avaliação do impacto da poluição em ecossistemas estuarinos e lagunares apresentam diversos tipos de lacunas, pelo que é importante desenvolver metodologias mais eficazes com organismos autóctones. Neste contexto, o objectivo central desta dissertação consistiu em desenvolver e validar métodos ecologicamente relevantes para avaliação da contaminação estuarina e dos seus efeitos, utilizando o góbio-comum (Pomatoschistus microps), quer como organismo-teste quer como espécie sentinela, devido à importante função que desempenha nas cadeias tróficas de diversos estuários da costa Portuguesa. A Ria de Aveiro foi seleccionada como área de estudo principalmente pelo facto de possuir zonas com diferentes tipos de contaminação predominante e de haver conhecimento científico de base abundante e de elevada qualidade sobre este ecosistema. Na primeira fase do estudo, foram investigados os efeitos agudos de dois hidrocarbonetos aromáticos policíclicos (HAPs) (benzo[a]pireno e antraceno), de um fuel-óleo e de dois metais (cobre e mercúrio) em P. microps, utilizando ensaios laboratoriais baseados em biomarcadores e em parâmetros comportamentais, os quais foram avaliados utilizando um dispositivo expressamente desenvolvido para o efeito, designado por speed performance device (SPEDE). Como biomarcadores foram utilizados parâmetros envolvidos em funções fisiológicas determinantes para a sobrevivência e desempenho dos animais (neurotransmissão, obtenção de energia, destoxificação e defesas anti-oxidantes), nomeadamente a actividade das enzimas acetilcolinesterase, lactato desidrogenase, CYP1A1, glutationa S-transferases, glutationa reductase, glutationa peroxidase, superóxido dismutase, catalase, tendo ainda sido determinados os níveis de peroxidação lipídica como indicador de danos oxidativos. De forma global, os resultados indicaram que os agentes e a mistura testados têm a capacidade de interferir com a função neurológica, de alterar as vias utilizadas para obtenção de energia celular, induzir as defesas antioxidantes e, no caso do cobre e do mercúrio, de causarem peroxidação lipídica. Foram ainda obtidas relações concentração-resposta a nível dos parâmetros comportamentais testados, nomeadamente a capacidade de nadar contra a corrente e a distância percorrida a nadar contra o fluxo de água, sugerindo que os agentes testados podem, por exemplo, diminuir a capacidade de fuga aos predadores, as probabilidades de captura de presas e o sucesso reprodutivo. Na segunda fase, tendo sido já adaptadas técnicas para determinação de vários biomarcadores em P. microps e estudada a sua resposta a dois grupos de poluentes particularmente relevantes em ecossistemas estuarinos e lagunares (metais e HAPs), foi efectuado um estudo de monitorização utilizando P. microps como bioindicador e que incluiu diversos parâmetros ecológicos e ecotoxicológicos, nomedamente: 20 parâmetros indicativos da qualidade da água e do sedimento, concentração de 9 metais em sedimentos e no corpo de P. microps, 8 biomarcadores e 2 índices de condição na espécie seleccionada. A amostragem foi efectuada em quatro locais da Ria de Aveiro, um considerado como referência (Barra) e três com diferentes tipos predominantes de contaminação (Vagueira, Porto de Aveiro e Cais do Bico), sazonalmente, durante um ano. Os resultados obtidos permitiram uma caracterização ecotoxicológica dos locais, incluindo informação sobre a qualidade da água, concentrações de contaminantes ambientais prioritários nos sedimentos e nos tecidos de P. microps, capacidade desta espécie para bioacumular metais, efeitos exercidos pelas complexas misturas de poluentes presentes em cada uma das zonas de amostragem nesta espécie e possíveis consequências para a população. A análise multivariada permitiu analisar de forma integrada todos os resultados, proporcionando informação que não poderia ser obtida analisando os dados de forma compartimentalizada. Em conclusão, os resultados obtidos no âmbito desta dissertação indicam que P. microps possui características adequadas para ser utilizado como organismoteste em ensaios laboratoriais (e.g. abundância, fácil manutenção, permite a determinação de diferentes tipos de critérios de efeito utilizando um número relativamente reduzido de animais, entre outras) e como organismo sentinela em estudos de monitorização da poluição e da qualidade ambiental, estando portanto de acordo com estudos de menor dimensão previamente efectuados. O trabalho desenvolvido permitiu ainda adaptar a P. microps diversas técnicas bioquímicas vulgarmente utilizadas como biomarcadores em Ecotoxicologia e validá-las quer no laboratório quer em cenários reais; desenvolver um novo bioensaio, utilizando um dispositivo de teste especialmente concebido para peixes epibentónicos baseado na performance natatória de uma espécie autóctone e em biomarcadores; relacionar os efeitos a nível bioquímico com parâmetros comportamentais que ao serem afectados podem reduzir de forma drástica e diversificada (e.g. aumento da mortalidade, diminuição do sucesso reprodutivo, redução do crescimento) a contribuição individual para a população. Finalmente, foi validada uma abordagem multidisciplinar, combinando metodologias ecológicas, ecotoxicológicas e químicas que, quando considerada de forma integrada utilizando análises de estatística multivariada, fornece informação científica da maior relevância susceptível de ser utilizada como suporte a medidas de conservação e gestão em estuários e sistemas lagunares.

Development of lithium disilicate based glass-ceramics

O principal objectivo deste estudo foi o desenvolvimento de vitrocerâmicos à base de dissilicato de lítio no sistema Li2O-K2O-Al2O3-SiO2 contendo uma razão molar SiO2/Li2O muito afastada da do dissilicato de lítio (Li2Si2O5) usando composições simples e a técnica tradicional de fusão-vazamento de vidro de forma a obter materiais com propriedades mecânicas, térmicas, químicas e eléctricas superiores que permitam a utilização destes materiais em diversas aplicações funcionais. Investigou-se o fenómeno de separação de fases, a cristalização e as relações estrutura-propriedades de vidros nos sistemas Li2O-SiO2, Li2O-Al2O3-SiO2 e Li2O-K2O-Al2O3-SiO2. Os vidros nos sistemas Li2O-SiO2 e Li2O-Al2O3-SiO2 apresentaram fraca densificação e resultaram em materiais frágeis, contrastando com a boa sinterização dos vidros no sistema Li2O-K2O-Al2O3-SiO2. Pequenas adições de Al2O3 e K2O ao sistema Li2O-SiO2 permitiram controlar a separação de fases devido à formação de espécies de Al(IV) que confirmaram o papel de Al2O3 como formador de rede. Os compactos de pó de vidro das composições contendo Al2O3 e K2O tratados termicamente resultaram em vitrocerâmicos bem densificados, apresentando dissilicato de lítio como a principal fase cristalina, e valores de resistência mecânica à flexão, resistência química e condutividade eléctrica (173-224 MPa, 25-50 mg/cm2 e ~2´10-18 S/cm, respectivamente) que possibilitam a utilização destes materiais em diversas aplicações funcionais. A adição de P2O5, TiO2 e ZrO2 ao sistema Li2O-K2O-Al2O3-SiO2 como agentes nucleantes revelou que os vidros contendo apresentaram cristalização em volume, com a formação de metassilicato de lítio a temperaturas mais baixas e dissilicato de lítio para as temperaturas mais elevadas, enquanto a adição de zircónia reduz o grau de segregação, aumenta a polimerização da matriz vítrea e desloca o valor de Tg para temperaturas superiores, inibindo a cristalização.

International cooperation for development in tourism destinations

The main goal of this thesis is to propose a conceptual theoretical model of critical success factors of International Development Cooperation programmes that are based in knowledge transfer approaches in the context of tourism development. The research was structured around three main theoretical pillars: international development cooperation (IDC), tourism as a tool for development, and knowledge transfer (KT). By exploring these pillars´ main interrelations, it was possible to gather the necessary background to develop the theoretical model and apply it to a real context. It was adopted a qualitative research approach using as a case study an IDC programme in tourism - the UNWTO.Volunteers programme. The key contribution of this thesis in the theoretical realm is the bridging of fields of study that are insufficiently covered in the scientific literature. The resulting model proposal applied to a real context of an IDC programme implementation permitted to test it partially providing useful insights for future research. It is postulated that IDC programmes in these contexts constitute a process rather than an end in itself. Therefore, they should be seen as a way of changing the state of the art of the tourism system in a sustainable manner so that it potentially generates positive development changes. This study suggested that it is not possible to achieve positive results if, instead of encouraging a KT and learning environment, it is simply disseminated knowledge in a linear, static, north-south approach. The characteristics of these interventions should be reviewed in that it was found that it is very difficult to guarantee the maintenance of the development changes induced by them if it is not safeguarded the necessary conditions and accountability to implement the recommended actions. While it was perceived a great potential for development changes to be induced by some IDC programmes in tourism destinations, it was concluded that these processes are too much dependent on the local political systems and existing power relations, as well as on the level of tourism development of the destination. However, more research is needed to examine the ability to generalise the findings to other IDC programmes and different destinations of developing countries.

Development of polymeric materials to inhibit bacterial quorum sensing

Bacterial infections are an increasing problem for human health. In fact, an increasing number of infections are caused by bacteria that are resistant to most antibiotics and their combinations. Therefore, the scientific community is currently searching for new solutions to fight bacteria and infectious diseases, without promoting antimicrobial resistance. One of the most promising strategies is the disruption or attenuation of bacterial Quorum Sensing (QS), a refined system that bacteria use to communicate. In a QS event, bacteria produce and release specific small chemicals, signal molecules - autoinducers (AIs) - into the environment. At the same time that bacterial population grows, the concentration of AIs in the bacterial environment increases. When a threshold concentration of AIs is reached, bacterial cells respond to it by altering their gene expression profile. AIs regulate gene expression as a function of cell population density. Phenotypes mediated by QS (QSphenotypes) include virulence factors, toxin production, antibiotic resistance and biofilm formation. In this work, two polymeric materials (linear polymers and molecularly imprinted nanoparticles) were developed and their ability to attenuate QS was evaluated. Both types of polymers should to be able to adsorb bacterial signal molecules, limiting their availability in the extracellular environment, with expected disruption of QS. Linear polymers were composed by one of two monomers (itaconic acid and methacrylic acid), which are known to possess strong interactions with the bacterial signal molecules. Molecularly imprinted polymer nanoparticles (MIP NPs) are particles with recognition capabilities for the analyte of interest. This ability is attained by including the target analyte at the synthesis stage. Vibrio fischeri and Aeromonas hydrophila were used as model species for the study. Both the linear polymers and MIP NPs, tested free in solutions and coated to surfaces, showed ability to disrupt QS by decreasing bioluminescence of V. fischeri and biofilm formation of A. hydrophila. No significant effect on bacterial growth was detected. The cytotoxicity of the two types of polymers to a fibroblast-like cell line (Vero cells) was also tested in order to evaluate their safety. The results showed that both the linear polymers and MIP NPs were not cytotoxic in the testing conditions. In conclusion, the results reported in this thesis, show that the polymers developed are a promising strategy to disrupt QS and reduce bacterial infection and resistance. In addition, due to their low toxicity, solubility and easy integration by surface coating, the polymers have potential for applications in scenarios where bacterial infection is a problem: medicine, pharmaceutical, food industry and in agriculture or aquaculture.

Development of a sustainable method for the extraction of lycopene and β-carotene from food wastes

The main objective of the present work is the study of a profitable process not only in the extraction and selective separation of lycopene and β-carotene, two compounds present in tomato, but also in its potential application to food industry wastes. This is one of the industries that produce larger amounts of wastes, which are rich in high value biomolecules with great economic interest. However, the conventional methods used to extract this kind of compounds are expensive which limits their application at large scale. Lycopene and βcarotene are carotenoids with high commercial value, known for their antioxidant activity and benefits to human health. Their biggest source is tomato, one of the world’s most consumed fruits, reason for which large quantities of waste is produced. This work focuses on the study of diverse solvents with a high potential to extract carotenoids from tomato, as well as the search for more environmentally benign solvents than those currently used to extract lycopene and β-carotene from biomass. Additionally, special attention was paid to the creation of a continuous process that would allow the fractionation of the compounds for further purification. Thus, the present work started with the extraction of both carotenoids using a wide range of solvents, namely, organic solvents, conventional salts, ionic liquids, polymers and surfactants. In this stage, each solvent was evaluated in what regards their capacity of extraction as well as their penetration ability in biomass. The results collected showed that an adequate selection of the solvents may lead to the complete extraction of both carotenoids in one single step, particularly acetone and tetrahydrofuran were the most effective ones. However, the general low penetration capacity of salts, ionic liquids, polymers and surfactants makes these solvents ineffective in the solid-liquid extraction process. As the organic solvents showed the highest capacity to extract lycopene and βcarotene, in particular tetrahydrofuran and acetone, the latter solvent used in the development process of fractionation, using to this by strategic use of solvents. This step was only successfully developed through the manipulation of the solubility of each compound in ethanol and n-hexane. The results confirmed the possibility of fractionating the target compounds using the correct addition order of the solvents. Approximately, 39 % of the β-carotene was dissolved in ethanol and about 64 % of lycopene was dissolved in n-hexane, thus indicating their separation for two different solvents which shows the selective character of the developed process without any prior stage optimization. This study revealed that the use of organic solvents leads to selective extraction of lycopene and β-carotene, allowing diminishing the numerous stages involved in conventional methods. At the end, it was possible to idealize a sustainable and of high industrial relevance integrated process, nevertheless existing the need for additional optimization studies in the future.

Development of variable displacement oil pump for internal combustion engines

In the last years the need to develop more environmentally friendly and efficient cars as led to the development of several technologies to improve the performance of internal combustion engines, a large part of the innovations are focused in the auxiliary systems of the engine, including, the oil pump, this is an element of great importance in the dynamics of the engine as well a considerable energy consumer. Most solutions for oil pumps to this day are fixed displacement, for medium and high speeds, the pump flow rate is higher than the needs of the engine, this excess flow leads to the need for recirculation of the fluid which represents a waste of energy. Recently, technological advances in this area have led to the creation of variable displacement oil pumps, these have become a 'must have' due to the numerous advantages they bring, although the working principle of vane or piston pumps is relatively well known, the application of this technology for the automotive industry is new and brings new challenges. The focus of this dissertation is to develop a new concept of variable displacement system for automotive oil pumps. The main objective is to obtain a concept that is totally adaptable to existing solutions on the market (engines), both dimensionally as in performance specifications, having at the same time an innovative mechanical system for obtaining variable displacement. The developed design is a vane pump with variable displacement going in line with existing commercial solutions, however, the variation of the eccentricity commonly used to provide an variable displacement delivery is not used, the variable displacement is achieved without varying the eccentricity of the system but with a variation of the length of the pumping chamber. The principle of operation of the pump is different to existing solutions while maintaining the ability to integrate standard parts such as control valves and mechanical safety valves, the pump is compatible with commercial solutions in terms of interfaces for connection between engine systems and pump. A concept prototype of the product was obtained in order to better evaluate the validity of the concept. The developed concept represents an innovation in oil pumps design, being unique in its mechanical system for variable displacement delivery.