Carbapenemases of Serratia fonticola UTAD54

As carbapenemases, serínicas e metalo-β-lactamases (MBLs), formam um grupo cada vez mais importante de β-lactamases capazes de tornar as bactérias resistentes a antibióticos β-lactâmicos, incluindo carbapenemos utilizados como antibióticos de último recurso no tratamento de infecções causadas por bactérias multirresistentes. De modo a compreender melhor a relação estrutura-função deste grupo de enzimas, prosseguimos com a caracterização bioquímica e estrutural das carbapenemases SFC-1 e Sfh-I específicas de Serratia fonticola UTAD54, uma estirpe ambiental isolada previamente de águas de consumo não tratadas no Nordeste de Portugal. Ambas as β-lactamases foram sobre-expressas em Escherichia coli e purificadas por cromatografia líquida. A SFC-1 recombinante, uma carbapenemase serínica, hidrolisa eficientemente antibióticos β-lactâmicos de todas as classes e exibe, comparativamente a enzimas relacionadas (ex. KPC), uma maior eficiência contra a ceftazidima e uma menor susceptibilidade aos inibidores convencionais das β-lactamases. As estruturas do cristal da SFC-1 nativa e de complexos de mutantes, obtidos por mutagénese dirigida, com o meropenemo não hidrolisado e na forma de acetilenzima foram determinados por substituição molecular utilizando cristalografia de raios-X. A estrutura da SFC-1 contém todas as características conservadas do centro activo das carbapenemases de classe A. Nas estruturas dos mutantes o meropenemo aparece orientado no centro activo por Thr236 e Thr238, posicionando-o próximo da Ser130 para a transferência do protão. Nas enzimas de classe A inibidas por carbapenemos, a interacção com a Arg244 impõe uma orientação diferente do meropenemo ligado, prejudicando a transferência do protão. Estas constituem as primeiras estruturas de uma carbapenemase de classe A com um carbapenemo no centro activo e revelam que estas enzimas alteram a orientação do meropenemo ligado para promover a catálise, sem alteração significativa da estrutura geral. A Sfh-I, tal como as outras MBLs da subclasse B2, apresenta um perfil de substratos reduzido, que inclui maioritariamente os carbapenemos. A Sfh-I hidrolisa imipenemo e meropenemo com um kcat de 51 e 109 s-1 e um KM de 79 e 215 μM, respectivamente. A Sfh-I liga um equivalente de zinco, como demonstrado por espectrometria de massa. Contrariamente a enzimas da subclasse B2 previamente caracterizadas, a Sfh-I hidrolisa a cefepima, mostrando que a Sfh-I é uma MBL da subclasse B2 com propriedades únicas. Por espectroscopia de fluorescência mostrou-se que a Sfh-I é capaz de ligar até 3 equivalentes de zinco (Kd2 = 95 μM; Kd3 = 2.3 mM). A estrutura do cristal da Sfh-I, determinada por substituição molecular utilizando a CphA como modelo, é a primeira para uma MBL da subclasse B2 não ligada. Esta estrutura revela a disposição das moléculas de água no centro activo corroborando um mecanismo catalítico para as MBLs da subclasse B2 no qual a His118, em vez do Asp120 proposto anteriormente, activa a molécula de água nucleofílica.

Alkali-free bioactive glasses for bone regeneration

Bioactive glasses and glass-ceramics are a class of third generation biomaterials which elicit a special response on their surface when in contact with biological fluids, leading to strong bonding to living tissues. The purpose of the present study was to develop diopside based alkali-free bioactive glasses in order to achieve good sintering behaviour, high bioactivity, and a dissolution/ degradation rates compatible with the target applications in bone regeneration and tissue engineering. Another aim was to understand the structure-property relationships in the investigated bioactive glasses. In this quest, various glass compositions within the Diopside (CaMgSi2O6) – Fluorapatite (Ca5(PO4)3F) – Tricalcium phosphate (3CaO•P2O5) system have been investigated. All the glasses were prepared by melt-quenching technique and characterized by a wide array of complementary characterization techniques. The glass-ceramics were produced by sintering of glass powders compacts followed by a suitable heat treatment to promote the nucleation and crystallization phenomena. Furthermore, selected parent glass compositions were doped with several functional ions and an attempt to understand their effects on the glass structure, sintering ability and on the in vitro bio-degradation and biomineralization behaviours of the glasses was made. The effects of the same variables on the devitrification (nucleation and crystallization) behaviour of glasses to form bioactive glass-ceramics were also investigated. Some of the glasses exhibited high bio-mineralization rates, expressed by the formation of a surface hydroxyapatite layer within 1–12 h of immersion in a simulated body fluid (SBF) solution. All the glasses showed relatively lower degradation rates in comparison to that of 45S5 Bioglass®. Some of the glasses showed very good in vitro behaviour and the glasses co-doped with zinc and strontium showed an in vitro dose dependent behaviour. The as-designed bioactive glasses and glass–ceramic materials are excellent candidates for applications in bone regeneration and for the fabrication of scaffolds for tissue engineering.

Diopside-fluorapatite-wollastonite based bioactive glasses and glass-ceramics

Bioactive glasses and glass–ceramics are a class of biomaterials which elicit special response on their surface when in contact with biological fluids, leading to strong bonding to living tissue. This particular trait along with good sintering ability and high mechanical strength make them ideal materials for scaffold fabrication. The work presented in this thesis is directed towards understanding the composition-structure-property relationships in potentially bioactive glasses designed in CaOMgOP2O5SiO2F system, in some cases with added Na2O. The main emphasis has been on unearthing the influence of glass composition on molecular structure, sintering ability and bioactivity of phosphosilicate glasses. The parent glass compositions have been designed in the primary crystallization field of the pseudo-ternary system of diopside (CaO•MgO•2SiO2) – fluorapatite (9CaO•3P2O5•CaF2) – wollastonite (CaO•SiO2), followed by studying the impact of compositional variations on the structure-property relationships and sintering ability of these glasses. All the glasses investigated in this work have been synthesized via melt-quenching route and have been characterized for their molecular structure, sintering ability, chemical degradation and bioactivity using wide array of experimental tools and techniques. It has been shown that in all investigated glass compositions the silicate network was mainly dominated by Q2 units while phosphate in all the glasses was found to be coordinated in orthophosphate environment. The glass compositions designed in alkali-free region of diopside – fluorapatite system demonstrated excellent sintering ability and good bioactivity in order to qualify them as potential materials for scaffold fabrication while alkali-rich bioactive glasses not only hinder the densification during sintering but also induce cytotoxicity in vitro, thus, are not ideal candidates for in vitro tissue engineering. One of our bioglass compositions with low sodium content has been tested successfully both in vivo and in preliminary clinical trials. But this work needs to be continued and deepened. The dispersing of fine glass particles in aqueous media or in other suitable solvents, and the study of the most important factors that affect the rheology of the suspensions are essential steps to enable the manufacture of porous structures with tailor-made hierarchical pores by advanced processing techniques such as Robocasting.