Chalcogenide thin films for solar cells: growth and properties

Thin film solar cells have in recent years gained market quota against traditional silicon photovoltaic panels. These developments were in a large part due to CdTe solar panels on whose development started earlier than their competitors. Panels based on Cu(In,Ga)Se2 (CIGS), despite being more efficient in a laboratory and industrial scale than the CdTe ones, still need a growth technology cheaper and easier to apply in industry. Although usually presented as a good candidate to make cheap panels, CIGS uses rare and expensive materials as In and Ga. The price evolution of these materials might jeopardize CIGS future. This thesis presents three different studies. The first is the study of different processes for the incorporation of Ga in a hybrid CIGS growth system. This system is based on sputtering and thermal evaporation. This technology is, in principle, easier to be applied in the industry and solar cells with efficiencies around to 7% were fully made in Aveiro. In the second part of this thesis, a new material to replace CIGS in thin film solar cells is studied. The growth conditions and fundamental properties of Cu2ZnSnSe4 (CZTSe) were studied in depth. Suitable conditions of temperature and pressure for the growth of this material are reported. Its band gap energy was estimated at 1.05 eV and the Raman scattering peaks were identified. Solar cells made with this material showed efficiencies lower than 0.1%. Finally, preliminary work regarding the incorporation of selenium in Cu2ZnSnS4 (CZTS) thin films was carried out. The structural and morphological properties of thin films of Cu2ZnSn(S,Se)4 have been studied and the results show that the incorporation of selenium is higher in films with precursors rather with already formed Cu2SnS3 or Cu2ZnSnS4 thin films. A solar cell with 0.9 % of efficiency was prepared.

Hybrid materials for biomedical applications

The increased longevity of humans and the demand for a better quality of life have led to a continuous search for new implant materials. Scientific development coupled with a growing multidisciplinarity between materials science and life sciences has given rise to new approaches such as regenerative medicine and tissue engineering. The search for a material with mechanical properties close to those of human bone produced a new family of hybrid materials that take advantage of the synergy between inorganic silica (SiO4) domains, based on sol-gel bioactive glass compositions, and organic polydimethylsiloxane, PDMS ((CH3)2.SiO2)n, domains. Several studies have shown that hybrid materials based on the system PDMS-SiO2 constitute a promising group of biomaterials with several potential applications from bone tissue regeneration to brain tissue recovery, passing by bioactive coatings and drug delivery systems. The objective of the present work was to prepare hybrid materials for biomedical applications based on the PDMS-SiO2 system and to achieve a better understanding of the relationship among the sol-gel processing conditions, the chemical structures, the microstructure and the macroscopic properties. For that, different characterization techniques were used: Fourier transform infrared spectrometry, liquid and solid state nuclear magnetic resonance techniques, X-ray diffraction, small-angle X-ray scattering, smallangle neutron scattering, surface area analysis by Brunauer–Emmett–Teller method, scanning electron microscopy and transmission electron microscopy. Surface roughness and wettability were analyzed by 3D optical profilometry and by contact angle measurements respectively. Bioactivity was evaluated in vitro by immersion of the materials in Kokubos’s simulated body fluid and posterior surface analysis by different techniques as well as supernatant liquid analysis by inductively coupled plasma spectroscopy. Biocompatibility was assessed using MG63 osteoblastic cells. PDMS-SiO2-CaO materials were first prepared using nitrate as a calcium source. To avoid the presence of nitrate residues in the final product due to its potential toxicity, a heat-treatment step (above 400 °C) is required. In order to enhance the thermal stability of the materials subjected to high temperatures titanium was added to the hybrid system, and a material containing calcium, with no traces of nitrate and the preservation of a significant amount of methyl groups was successfully obtained. The difficulty in eliminating all nitrates from bulk PDMS-SiO2-CaO samples obtained by sol-gel synthesis and subsequent heat-treatment created a new goal which was the search for alternative sources of calcium. New calcium sources were evaluated in order to substitute the nitrate and calcium acetate was chosen due to its good solubility in water. Preparation solgel protocols were tested and homogeneous monolithic samples were obtained. Besides their ability to improve the bioactivity, titanium and zirconium influence the structural and microstructural features of the SiO2-TiO2 and SiO2-ZrO2 binary systems, and also of the PDMS-TiO2 and PDMS-ZrO2 systems. Detailed studies with different sol-gel conditions allowed the understanding of the roles of titanium and zirconium as additives in the PDMS-SiO2 system. It was concluded that titanium and zirconium influence the kinetics of the sol-gel process due to their different alkoxide reactivity leading to hybrid xerogels with dissimilar characteristics and morphologies. Titanium isopropoxide, less reactive than zirconium propoxide, was chosen as source of titanium, used as an additive to the system PDMS-SiO2-CaO. Two different sol-gel preparation routes were followed, using the same base composition and calcium acetate as calcium source. Different microstructures with high hydrophobicit were obtained and both proved to be biocompatible after tested with MG63 osteoblastic cells. Finally, the role of strontium (typically known in bioglasses to promote bone formation and reduce bone resorption) was studied in the PDMS-SiO2-CaOTiO2 hybrid system. A biocompatible material, tested with MG63 osteoblastic cells, was obtained with the ability to release strontium within the values reported as suitable for bone tissue regeneration.

O sistema dois-hidrido de levedura para confirmação da sinalização de APP Tipo-Noth

Inúmeras potenciais funções foram sugeridas para a APP (Proteína Precursora de Amilóide de Alzheimer), contudo, fisiologicamente, a função precisa da APP não foi ainda desvendada. A APP tem características consistentes com a função de molécula-receptora, capaz de reconhecer sinais extracelulares. Também relevante para este trabalho, é o facto de que a sinalização através de RIP (Proteólise Intramembranar Regulada) tem consequências na expressão génica, como no caso da sinalização tipo-Notch. Tal como a proteína Notch, a APP é processada resultando num fragmento C-terminal designado por AICD (Domínio Intracelular da APP). Neste trabalho é focado o papel importante na sinalização nuclear desempenhado pelo fragmento AICD, especificamente através da interacção com proteínas adaptadoras, promovendo a transcrição. Com o objectivo de contribuir para uma melhor compreensão da base molecular da DA (Doença de Alzheimer), torna-se importante investigar as vias de localização nuclear do AICD e o seu envolvimento na transcrição génica, possivelmente afectando proteínas até agora não associadas à DA. Por estes motivos é fundamental a identificação de novas proteínas que interajam com a APP. Um rastreio foi efectuado, utilizando o sistema Dois-Híbrido em Levedura, para identificar interacções específicas do AICD no cérebro humano e, assim, caracterizar o interactoma do AICD. Foi feito o rastreio de aproximadamente 1.1x108 clones de uma biblioteca de cDNA de cérebro humano com o domínio C-terminal da APP com a mutação Y687E, que mimetiza o estado fosforilado. De experiências anteriores deste laboratório sabemos que a tirosina-687 afecta a localização subcelular da APP e é também consensual que a fosforilação é importante nos mecanismos de transdução de sinais, daí a utilização deste mutante parecer apropriada. O rastreio originou 55 clones positivos que foram analisados para identificar proteínas que interagem com a APP. Dois clones são particularmente importantes, a RanBPM e a Transportin-SR2, visto que estão associadas ao transporte de proteínas para o núcleo e confirmam a sinalização nuclear da APP. ABSTRACT: Many putative functions for APP (Alzheimer’s amyloid precursor protein) have been suggested, although the precise physiological function of APP remains to be elucidated. APP has characteristics consistent with it having a role as a receptor, capable of mediating extracellular signals. Also of relevance to the work described here is that RIP (Regulated Intramembrane Proteolysis) signalling can have consequences in gene expression, similar to Notch signalling. Like the latter, APP is processed by RIP resulting in a C-terminal fragment known as AICD. Here we test the hypothesis that the AICD fragment may play an important role in nuclear signalling, specifically by interacting with adaptor proteins potentiating transcription. Therefore, in order to contribute to our understanding of the molecular basis of AD (Alzheimer’s disease) it is important to investigate the pathways of AICD nuclear targeting and its involvement in gene transcription, possibly affecting other proteins hitherto not associated with AD. Thus, it is important to identify AICD binding proteins. A Yeast Two-Hybrid (YTH) screen was performed to identify human brainspecific AICD binding proteins, and thus characterize the AICD interactome. The screen of approximately 1.1 x108 clones from a human brain cDNA library was carried out using the AICD fragment with an Y687E mutation, which mimics phosphorylation on that residue. From previous work carried out in the laboratory we know that tyrosine-687 phosphorylation affects subcellular localization of APP, and it is also recognized that phosphorylation events are important in signal transduction mechanisms, hence the use of this mutant is appropriate. The YTH screen yielded 55 positive clones that were analysed and several novel brain-specific APP binding proteins were identified. Two clones were particularly important, RanBPM and Transportin-SR2, being that they are associated with the nuclear transport of proteins, and support the nuclear signalling for APP.

Gestão de energia em ambiente industrial

A Sociedade da Água de Luso, S.A., localizada no concelho de Mealhada, é uma empresa do setor do engarrafamento de águas minerais naturais, de nascente e de consumo humano. Esta realiza as suas atividades, tendo em consideração a eficiência energética, ao longo do seu processo produtivo. Desta forma, o trabalho desenvolvido teve como objetivo o acompanhamento da implementação do sistema de monitorização e recolha de dados, que posteriormente foi útil na redução dos consumos energéticos (consumo de ar comprimido). Para além disto, também foi proposta uma medida de eficiência energética que visa a redução de energia elétrica na área da iluminação. O sistema de monitorização e recolha de dados e a criação de uma equipa de redução do consumo de ar comprimido permitiram a identificação das áreas de atuação, a monitorização das metas estipuladas no âmbito da equipa e a detecção de anomalias. A medida de eficiência energética aplicada incide na substituição de lâmpadas fluorescentes tubulares T8 por lâmpadas fluorescentes tubulares T5. Assim, a implementação deste sistema e a aplicação das medidas de eficiência energética na rede de ar comprimido no âmbito da equipa permitiram uma redução de 0,03 kWh/hL o que significa uma poupança de 5.600 € em quinze semanas. Ao nível da iluminação as medidas sugeridas permitem uma redução de 8.945 kWh/ano o que corresponde a uma poupança de 1.055 €/ano.