Ecological quality assessment in transitional systems

Estuaries are poles of attraction for human settlement which is a source of pressures to surface water bodies. The implementation of the European Water Framework Directive (WDF, 2000/60/EC) has increased the investigation in order to develop methodologies to assess the Ecological Quality Status (EQS) of aquatic ecosystems. Transitional systems are naturally stressed and characterized by highly dynamic physical, chemical and hydro-morphologic conditions and by species with a higher level of tolerance to change, being more difficult to develop suitable quality indicators for these systems. The general purpose of this study is to test the ability of synthesis descriptors, including primary (S, taxa richness) and derived biological variable (H’, Shannon-Wiener diversity), biotic indices (AMBI and M-AMBI), body size properties (abundance distribution by body size classes, length, weight and length-weight relationships) and non-taxonomic indices (ISS), as well as functional indicators related to the decomposition rates of various experimental substrates, a macrophyte (Phragmites australis) and an alga (Fucus vesiculosus), to evaluate the environmental quality in transitional systems. This study was carried out in one of the most pristine channels of the Ria the Aveiro, Mira Channel, along a full salinity gradient and in a metals and metalloid sediment contamination area, the Estarreja Channel, and two reference channels (Canelas and Salreu). In this study were used different sampling techniques, the leaf-bag technique and a hand-held corer. In Mira Channel, the alga and the macrophyte presented an opposite trend in the decomposition rate along the salinity gradient, with the decomposition rates of the alga always higher than those of the macrophyte. The decomposition rates of the macrophyte and the alga were higher in the mid estuary and in higher salinity areas, respectively, corresponding to the preferencial distribution areas of each species. The macrobenthic fauna associated with the decaying and an artificial substrate (control) showed equally well the benthic succession from the marine to the freshwater areas and, despite the strong differences in the decay rates, no significant differences were found between the benthic communities associated with the alga and the macrophyte. The body size properties of the macrobenthic fauna associated with the P. australis leaf-bag (1mm and 5mm) and corer samples were studied along the full salinity gradient. The dominant species of the sub-set of measured specimens were not the same of the original macrobenthic fauna sampled but, despite that, the sub-set of measured specimens was also able to show the benthic succession from the marine to the freshwater areas. The body size abundance distribution of the benthic macroinvertebrates according to the ISS size classes did not show a particular trend in any sampler along the salinity gradient. Significant differences were found in the length, weight and length-weight relationships of Annelids, , Molluscs and even some species along the salinity gradient. No significant differences were found in the AMBI, M-AMBI and ISS values along the salinity gradient for all the samplers. The EQS of the corer samples obtained using the M-AMBI was lower than that of the leaf-bags. The EQS obtained with the ISS was higher than that obtained with the M-AMBI in the leaf-bags but not in the corer samples. The ecological effects of contaminated sediments associated with the industrial chemical effluents discharged in the Estarreja Channel were studied a decade after ceasing the emissions, using the Sediment Quality Triad approach and two reference channels. The results showed that despite the emissions ceased in 2004, the sediment remains polluted with high levels of metals and metalloid, available to bioaccumulation and with severe consequences at the community level. The sediment contamination problem was also studied using the leaf-bag technique with a macrophyte, an alga and a control substrate. The results showed that the decay rates, the associated macrofauna and the application of the AMBI, M-AMBI and ISS indices to the mesh-bag samples were not able to identify the sediment contamination. Contrarily to the AMBI, the M-AMBI and the ISS showed significant differences between the contaminated and the reference channels for the corer samples. Although such statistical significance, the interest of using these complex biotic indices could be questioned, when much simple ones, like the S and H’ allow to reach the same conclusions.

Methodologies for a sustainable development of estuarine ecosystems

As zonas costeiras, estuarinas e lagunares são consideradas áreas muito produtivas e dotadas de grande biodiversidade sendo, por isso, consideradas de elevado valor ecológico e económico. No entanto, nas últimas décadas tem vindo a verificar-se um aumento da contaminação destes ecossistemas como resultado de diversas actividades antrópicas. As abordagens actualmente disponíveis para avaliação do impacto da poluição em ecossistemas estuarinos e lagunares apresentam diversos tipos de lacunas, pelo que é importante desenvolver metodologias mais eficazes com organismos autóctones. Neste contexto, o objectivo central desta dissertação consistiu em desenvolver e validar métodos ecologicamente relevantes para avaliação da contaminação estuarina e dos seus efeitos, utilizando o góbio-comum (Pomatoschistus microps), quer como organismo-teste quer como espécie sentinela, devido à importante função que desempenha nas cadeias tróficas de diversos estuários da costa Portuguesa. A Ria de Aveiro foi seleccionada como área de estudo principalmente pelo facto de possuir zonas com diferentes tipos de contaminação predominante e de haver conhecimento científico de base abundante e de elevada qualidade sobre este ecosistema. Na primeira fase do estudo, foram investigados os efeitos agudos de dois hidrocarbonetos aromáticos policíclicos (HAPs) (benzo[a]pireno e antraceno), de um fuel-óleo e de dois metais (cobre e mercúrio) em P. microps, utilizando ensaios laboratoriais baseados em biomarcadores e em parâmetros comportamentais, os quais foram avaliados utilizando um dispositivo expressamente desenvolvido para o efeito, designado por speed performance device (SPEDE). Como biomarcadores foram utilizados parâmetros envolvidos em funções fisiológicas determinantes para a sobrevivência e desempenho dos animais (neurotransmissão, obtenção de energia, destoxificação e defesas anti-oxidantes), nomeadamente a actividade das enzimas acetilcolinesterase, lactato desidrogenase, CYP1A1, glutationa S-transferases, glutationa reductase, glutationa peroxidase, superóxido dismutase, catalase, tendo ainda sido determinados os níveis de peroxidação lipídica como indicador de danos oxidativos. De forma global, os resultados indicaram que os agentes e a mistura testados têm a capacidade de interferir com a função neurológica, de alterar as vias utilizadas para obtenção de energia celular, induzir as defesas antioxidantes e, no caso do cobre e do mercúrio, de causarem peroxidação lipídica. Foram ainda obtidas relações concentração-resposta a nível dos parâmetros comportamentais testados, nomeadamente a capacidade de nadar contra a corrente e a distância percorrida a nadar contra o fluxo de água, sugerindo que os agentes testados podem, por exemplo, diminuir a capacidade de fuga aos predadores, as probabilidades de captura de presas e o sucesso reprodutivo. Na segunda fase, tendo sido já adaptadas técnicas para determinação de vários biomarcadores em P. microps e estudada a sua resposta a dois grupos de poluentes particularmente relevantes em ecossistemas estuarinos e lagunares (metais e HAPs), foi efectuado um estudo de monitorização utilizando P. microps como bioindicador e que incluiu diversos parâmetros ecológicos e ecotoxicológicos, nomedamente: 20 parâmetros indicativos da qualidade da água e do sedimento, concentração de 9 metais em sedimentos e no corpo de P. microps, 8 biomarcadores e 2 índices de condição na espécie seleccionada. A amostragem foi efectuada em quatro locais da Ria de Aveiro, um considerado como referência (Barra) e três com diferentes tipos predominantes de contaminação (Vagueira, Porto de Aveiro e Cais do Bico), sazonalmente, durante um ano. Os resultados obtidos permitiram uma caracterização ecotoxicológica dos locais, incluindo informação sobre a qualidade da água, concentrações de contaminantes ambientais prioritários nos sedimentos e nos tecidos de P. microps, capacidade desta espécie para bioacumular metais, efeitos exercidos pelas complexas misturas de poluentes presentes em cada uma das zonas de amostragem nesta espécie e possíveis consequências para a população. A análise multivariada permitiu analisar de forma integrada todos os resultados, proporcionando informação que não poderia ser obtida analisando os dados de forma compartimentalizada. Em conclusão, os resultados obtidos no âmbito desta dissertação indicam que P. microps possui características adequadas para ser utilizado como organismoteste em ensaios laboratoriais (e.g. abundância, fácil manutenção, permite a determinação de diferentes tipos de critérios de efeito utilizando um número relativamente reduzido de animais, entre outras) e como organismo sentinela em estudos de monitorização da poluição e da qualidade ambiental, estando portanto de acordo com estudos de menor dimensão previamente efectuados. O trabalho desenvolvido permitiu ainda adaptar a P. microps diversas técnicas bioquímicas vulgarmente utilizadas como biomarcadores em Ecotoxicologia e validá-las quer no laboratório quer em cenários reais; desenvolver um novo bioensaio, utilizando um dispositivo de teste especialmente concebido para peixes epibentónicos baseado na performance natatória de uma espécie autóctone e em biomarcadores; relacionar os efeitos a nível bioquímico com parâmetros comportamentais que ao serem afectados podem reduzir de forma drástica e diversificada (e.g. aumento da mortalidade, diminuição do sucesso reprodutivo, redução do crescimento) a contribuição individual para a população. Finalmente, foi validada uma abordagem multidisciplinar, combinando metodologias ecológicas, ecotoxicológicas e químicas que, quando considerada de forma integrada utilizando análises de estatística multivariada, fornece informação científica da maior relevância susceptível de ser utilizada como suporte a medidas de conservação e gestão em estuários e sistemas lagunares.

An evaluation of trace metal distribution, enrichment factors and risk in sediments of a coastal lagoon (Ria de Aveiro, Portugal)

This paper describes a sediment survey undertaken to unravel patterns of distribution and dispersion of trace metals in an Iberian Peninsula northwestern coastal lagoon (Ria de Aveiro). Cadmium, lead, chromium, copper and zinc were analyzed in bottom sediments. Geochemical normalization is performed and two different regression models for each metal versus aluminum are tested and compared using the respective enrichment factors (EF), an estimation of the relative importance of anthropogenic contributions to the studied sediments. Mean sediment quality guideline quotients (mSQGQ) are used to evaluate sediment quality and associated potential risk to biota with effects range low as empirical sediment quality guideline (SQG) in the basis for mSQGQ calculation. Additionally, the geoaccumulation index is calculated to compare studied sediment levels to global baseline levels. The application of SQGs revealed insufficient characterization capability, especially when contrasted to EF calculated from the regression methods. These pointed a mildly enriched system with localized “hot spot” areas. Therefore, it can be considered that bottom sediments in the Ria de Aveiro system are in their majority unpolluted, zinc being the only metal of concern, presenting enrichment in all four main channels. The major rivers outlets (Caster, Antuã, and Vouga) constitute point sources, thus presenting potential risk for biota. Yet, the strong tidal influence creates a damping effect by efficiently redistributing sediment bound metals.

Radiological imaging in digital systems: the effect of exposure parameters in diagnostic quality and patient dose

Esta tese pretende contribuir para o estudo e análise dos factores relacionados com as técnicas de aquisição de imagens radiológicas digitais, a qualidade diagnóstica e a gestão da dose de radiação em sistema de radiologia digital. A metodologia encontra-se organizada em duas componentes. A componente observacional, baseada num desenho do estudo de natureza retrospectiva e transversal. Os dados recolhidos a partir de sistemas CR e DR permitiram a avaliação dos parâmetros técnicos de exposição utilizados em radiologia digital, a avaliação da dose absorvida e o índice de exposição no detector. No contexto desta classificação metodológica (retrospectiva e transversal), também foi possível desenvolver estudos da qualidade diagnóstica em sistemas digitais: estudos de observadores a partir de imagens arquivadas no sistema PACS. A componente experimental da tese baseou-se na realização de experiências em fantomas para avaliar a relação entre dose e qualidade de imagem. As experiências efectuadas permitiram caracterizar as propriedades físicas dos sistemas de radiologia digital, através da manipulação das variáveis relacionadas com os parâmetros de exposição e a avaliação da influência destas na dose e na qualidade da imagem. Utilizando um fantoma contrastedetalhe, fantomas antropomórficos e um fantoma de osso animal, foi possível objectivar medidas de quantificação da qualidade diagnóstica e medidas de detectabilidade de objectos. Da investigação efectuada, foi possível salientar algumas conclusões. As medidas quantitativas referentes à performance dos detectores são a base do processo de optimização, permitindo a medição e a determinação dos parâmetros físicos dos sistemas de radiologia digital. Os parâmetros de exposição utilizados na prática clínica mostram que a prática não está em conformidade com o referencial Europeu. Verifica-se a necessidade de avaliar, melhorar e implementar um padrão de referência para o processo de optimização, através de novos referenciais de boa prática ajustados aos sistemas digitais. Os parâmetros de exposição influenciam a dose no paciente, mas a percepção da qualidade de imagem digital não parece afectada com a variação da exposição. Os estudos que se realizaram envolvendo tanto imagens de fantomas como imagens de pacientes mostram que a sobreexposição é um risco potencial em radiologia digital. A avaliação da qualidade diagnóstica das imagens mostrou que com a variação da exposição não se observou degradação substancial da qualidade das imagens quando a redução de dose é efectuada. Propõe-se o estudo e a implementação de novos níveis de referência de diagnóstico ajustados aos sistemas de radiologia digital. Como contributo da tese, é proposto um modelo (STDI) para a optimização de sistemas de radiologia digital.

Challenges in mercury speciation and fractionation in soil and sediment

This investigation focused on the development, test and validation of methodologies for mercury fractionation and speciation in soil and sediment. After an exhaustive review of the literature, several methods were chosen and tested in well characterised soil and sediment samples. Sequential extraction procedures that divide mercury fractions according to their mobility and potential availability in the environment were investigated. The efficiency of different solvents for fractionation of mercury was evaluated, as well as the adequacy of different analytical instruments for quantification of mercury in the extracts. Kinetic experiments to establish the equilibrium time for mercury release from soil or sediment were also performed. It was found that in the studied areas, only a very small percentage of mercury is present as mobile species and that mobility is associated to higher aluminium and manganese contents, and that high contents of organic matter and sulfur result in mercury tightly bound to the matrix. Sandy soils tend to release mercury faster that clayey soils, and therefore, texture of soil or sediment has a strong influence on the mobility of mercury. It was also understood that analytical techniques for quantification of mercury need to be further developed, with lower quantification limits, particularly for mercury quantification of less concentrated fractions: water-soluble e exchangeable. Although the results provided a better understanding of the distribution of mercury in the sample, the complexity of the procedure limits its applicability and robustness. A proficiency-testing scheme targeting total mercury determination in soil, sediment, fish and human hair was organised in order to evaluate the consistency of results obtained by different laboratories, applying their routine methods to the same test samples. Additionally, single extractions by 1 mol L-1 ammonium acetate solution, 0.1 mol L-1 HCl and 0.1 mol L-1 CaCl2, as well as extraction of the organometallic fraction were proposed for soil; the last was also suggested for sediment and fish. This study was important to update the knowledge on analytical techniques that are being used for mercury quantification, the associated problems and sources of error, and to improve and standardize mercury extraction techniques, as well as to implement effective strategies for quality control in mercury determination. A different, “non chemical-like” method for mercury species identification was developed, optimised and validated, based on the thermo-desorption of the different mercury species. Compared to conventional extraction procedures, this method has advantages: it requires little to no sample treatment; a complete identification of species present is obtained in less than two hours; mercury losses are almost neglectable; can be considered “clean”, as no residues are produced; the worldwide comparison of results obtained is easier and reliable, an important step towards the validation of the method. Therefore, the main deliverables of this PhD thesis are an improved knowledge on analytical procedures for identification and quantification of mercury species in soils and sediments, as well as a better understanding of the factors controlling the behaviour of mercury in these matrices.

Assessing the effectiveness of chemical treatment with nanomaterials in improving the quality of different industrial effluents

Industrial activities are the major sources of pollution in all environments. Depending on the type of industry, various levels of organic and inorganic pollutants are being continuously discharged into the environment. Although, several kinds of physical, chemical, biological or the combination of methods have been proposed and applied to minimize the impact of industrial effluents, few have proved to be totally effective in terms of removal rates of several contaminants, toxicity reduction or amelioration of physical and chemical properties. Hence, it is imperative to develop new and innovative methodologies for industrial wastewater treatment. In this context nanotechnology arises announcing the offer of new possibilities for the treatment of wastewaters mainly based on the enhanced physical and chemical proprieties of nanomaterials (NMs), which can remarkably increase their adsorption and oxidation potential. Although applications of NMs may bring benefits, their widespread use will also contribute for their introduction into the environment and concerns have been raised about the intentional use of these materials. Further, the same properties that make NMs so appealing can also be responsible for producing ecotoxicological effects. In a first stage, with the objective of selecting NMs for the treatment of organic and inorganic effluents we first assessed the potential toxicity of nanoparticles of nickel oxide (NiO) with two different sizes (100 and 10-20 nm), titanium dioxide (TiO2, < 25 nm) and iron oxide (Fe2O3, ≈ 85x425 nm). The ecotoxicological assessment was performed with a battery of assays using aquatic organisms from different trophic levels. Since TiO2 and Fe2O3 were the NMs that presented lower risks to the aquatic systems, they were selected for the second stage of this work. Thus, the two NMs pre-selected were tested for the treatment of olive mill wastewater (OMW). They were used as catalyst in photodegradation systems (TiO2/UV, Fe2O3/UV, TiO2/H2O2/UV and Fe2O3/H2O2/UV). The treatments with TiO2 or Fe2O3 combined with H2O2 were the most efficient in ameliorating some chemical properties of the effluent. Regarding the toxicity to V. fischeri the highest reduction was recorded for the H2O2/UV system, without NMs. Afterwards a sequential treatment using photocatalytic oxidation with NMs and degradation with white-rot fungi was applied to OMW. This new approach increased the reduction of chemical oxygen demand, phenolic content and ecotoxicity to V. fischeri. However, no reduction in color and aromatic compounds was achieved after 21 days of biological treatment. The photodegradation systems were also applied to treat the kraft pulp mill and mining effluents. For the organic effluent the combination NMs and H2O2 had the best performances in reduction the chemical parameters as well in terms of toxicity reduction. However, for the mine effluent the best (TiO2/UV and Fe2O3/UV) were only able to significantly remove three metals (Zn, Al and Cd). Nonetheless the treatments were able of reducing the toxicity of the effluent. As a final stage, the toxicity of solid wastes formed during wastewater treatment with NMs was assessed with Chironomus riparius larvae, a representative species of the sediment compartment. Certain solid wastes showed the potential to negatively affect C. riparius survival and growth, depending on the type of effluent treated. This work also brings new insights to the use of NMs for the treatment of industrial wastewaters. Although some potential applications have been announced, many evaluations have to be performed before the upscaling of the chemical treatments with NMs.

Product quality and compliance in the pharmaceutical industry

This thesis aims to highlight the importance of a Product Quality & Compliance department in a Pharmaceutical Industry, on the good performance of company's activities and the achievement of their goals and mission. Despite the wide activities performed by this Department, the purpose of this work will be completed by describing only some of their reponsibilities. The tasks described are specifically the ones I have been performing throughout my professional experience at Bluepharma - Pharmaceutical Industry, SA, initiated in June 2012 in the Quality Assurance Department until today in the currently named Product Quality & Compliance department. This thesis is structured into 4 parts. The first chapter is an introduction to this thesis, and includes its context and objectives, followed by a brief overview of the state-of-the art in the pharmaceutical industry, including the market environment, the regulatory environment and quality requirements. A small presentation of the company and the department where were and still are developed my professional activity is also made in this chapter. In the following chapter are described the main tasks performed, the complementary activities and key skills acquired throughout this professional experience. A discussion and conclusion is presented at the end, including an analysis of the reported activities, main difficulties encountered its role and importance in the company performance as well as the skills acquired during this work experience.