Monitoring sandy shores morphologies by DGPS: a practical tool to generate digital elevation models

The highly dynamic nature of some sandy shores with continuous morphological changes require the development of efficient and accurate methodological strategies for coastal hazard assessment and morphodynamic characterisation. During the past decades, the general methodological approach for the establishment of coastal monitoring programmes was based on photogrammetry or classical geodetic techniques. With the advent of new geodetic techniques, space-based and airborne-based, new methodologies were introduced in coastal monitoring programmes. This paper describes the development of a monitoring prototype that is based on the use of global positioning system (GPS). The prototype has a GPS multiantenna mounted on a fast surveying platform, a land vehicle appropriate for driving in the sand (four-wheel quad). This system was conceived to perform a network of shore profiles in sandy shores stretches (subaerial beach) that extend for several kilometres from which high-precision digital elevation models can be generated. An analysis of the accuracy and precision of some differential GPS kinematic methodologies is presented. The development of an adequate survey methodology is the first step in morphodynamic shore characterisation or in coastal hazard assessment. The sample method and the computational interpolation procedures are important steps for producing reliable three-dimensional surface maps that are real as possible. The quality of several interpolation methods used to generate grids was tested in areas where there were data gaps. The results obtained allow us to conclude that with the developed survey methodology, it is possible to Survey sandy shores stretches, under spatial scales of kilometers, with a vertical accuracy of greater than 0.10 m in the final digital elevation models.

A experiência de visita dirigida a múltiplas atrações: análise do comportamento espacial do turista e da sua satisfação

Esta investigação teve como objetivo central averiguar se o comportamento espaciotemporal do turista urbano influencia a sua satisfação com a experiência de visita multiatração. Apesar de a mobilidade ser uma condição sine qua non do turismo, e, por outro lado, a visita a múltiplas atrações o contexto habitual em que se desenvolve a experiência turística em contexto urbano, a investigação neste domínio tende a ignorar a dimensão espaciotemporal e multiatração dessa experiência. O modelo conceptual proposto visa a sistematização da análise do comportamento espaciotemporal do turista bem como o estudo da sua relação com a satisfação, enquanto satisfação global e satisfação com dimensões da experiência. A partir deste, foi definido o modelo da pesquisa que, modelizando a questão central em estudo, teve por base dois instrumentos principais: estudo de rastreamento através de equipamento GPS e inquérito por questionário, realizados junto de hóspedes de dez hotéis de Lisboa (n= 413). A análise dos dados assume, por sua vez, dupla natureza: espacial e estatística. Em termos de análise espacial, a metodologia SIG em que se baseou a concretização dos mapas foi executada tendo como suporte a solução ArcGIS for Desktop 10.1, permitindo gerar visualizações úteis do ponto de vista da questão em estudo. A análise estatística dos dados compreendeu métodos descritivos, exploratórios e inferenciais, tendo como principal instrumento de teste das hipóteses formuladas a modelação PLS-PM, complementada pela análise PLS-MGA, com recurso ao programa SmartPLS 2.0. Entre as várias relações significativas encontradas, a conclusão mais importante que se pode retirar da investigação empírica é que, de facto, o comportamento espaciotemporal do turista urbano influencia a sua satisfação com a experiência de visita multiatração, afigurando-se particularmente importante neste contexto, em termos científicos e empíricos, investigar a heterogeneidade subjacente à população em estudo.

Integrated coastal geoengineering approach for maritime environments

This dissertation introduces several methodological approaches which integrate a proposed coastal management model in an interdisciplinary perspective. The research presented herein is displayed as a set of publications comprising different thematic outlooks. The thesis develops an integrated coastal geoengineering approach which is intrinsically linked to the studied maritime environments. From sandy coasts and marine works to rocky platforms and sea cliffs, this study includes field work between Caminha – Figueira da Foz (NW Portugal) and Galicia (NW Spain). The research also involves an analysis and geological-geotechnical characterisation of natural rock (armourstone) and artificial units (concrete blocks) applied to coastal structures. The main goal is to contribute to the characterisation and re-evaluation of georesources and to determine armourstone suitability and availability from its source (quarry). It was also important to diagnose the geomaterials in situ concerning their degradation/deterioration level on the basis of the current status of the coastal protection works in order to facilitate more efficient monitoring and maintenance, with economic benefits. In the rocky coast approach the coastal blocks were studied along the platform, but also the geoforms were studied from a coastal morphodynamics point of view. A shoreline evolution analysis was developed for sandy coasts through Digital Shoreline Analysis System (DSAS) extension. In addition, the spatial and statistical analysis applied to sea cliffs allowed the establishment of susceptibility zones to erosion and hazardous areas. All of these studies have different purposes and results however, there is a common denominator – GIS mapping. Hence, apart from the studied coastal environment, there is an integrated system which includes a sequence of procedures and methodologies that persisted during the research period. This is a step forward in the study of different coastal environments by using almost the same methodologies. This will allow the characterisation, monitoring and assessment of coastal protection works, rocky coasts, and shore platforms. With such data, it is possible to propose or recommend strategies for coastal and shoreline management based on several justifications in terms of social, economic, and environmental questions, or even provide a GIS-based planning support system reinforced by geocartographic decisions. Overall the development of the applied cartography embraces six stages which will allow the production of detailed maps of the maritime environment: (1) high-resolution aerial imagery surveys; (2) visual inspection and systematic monitoring; (3) applied field datasheet; (4) in situ evaluation; (5) scanline surveying; and (6) GIS mapping. This thesis covers fundamental matters that were developed over the course of scientific publication and as a consequence they represent the results obtained and discussed. The subjects directly related to the thesis architecture are: (i) cartography applied to coastal dynamics (including an art historical analysis as a tool to comprehend the coastal evolution and the littoral zone); (ii) georesources assessment (the role of cartography in georesources zoning, assessment and armourstone durability); (iii) coastal geoengineering applications and monitoring (Espinho pilot site in NW Portugal as an experimental field); (iv) rocky coast and shore platform studies and characterisation; (v) sandy and mixed environment approaches; (vi) coastal geosciences GIS mapping and photogrammetric surveying (coastal geoengineering); and (vii) shoreline change mapping and coastal management strategies (the CartGalicia Project as an example – NW Spain). Finally, all of these thematic areas were crucial to generate the conceptual models proposed and to shape the future of integrated coastal coastal geoengineering management.