Energy systems analysis of transboundary river basins in a nexus approach: the Sava river basin study case

Resource management policies are frequently designed and planned to target specific needs of particular sectors, without taking into account the interests of other sectors who share the same resources. In a climate of resource depletion, population growth, increase in energy demand and climate change awareness, it is of great importance to promote the assessment of intersectoral linkages and, by doing so, understand their effects and implications. This need is further augmented when common use of resources might not be solely relevant at national level, but also when the distribution of resources ranges over different nations. This dissertation focuses on the study of the energy systems of five south eastern European countries, which share the Sava River Basin, using a water-food(agriculture)-energy nexus approach. In the case of the electricity generation sector, the use of water is essential for the integrity of the energy systems, as the electricity production in the riparian countries relies on two major technologies dependent on water resources: hydro and thermal power plants. For example, in 2012, an average of 37% of the electricity production in the SRB countries was generated by hydropower and 61% in thermal power plants. Focusing on the SRB, in terms of existing installed capacities, the basin accommodates close to a tenth of all hydropower capacity while providing water for cooling to 42% of the net capacity of thermal power currently in operation in the basin. This energy-oriented nexus study explores the dependency on the basin’s water resources of the energy systems in the region for the period between 2015 and 2030. To do so, a multi-country electricity model was developed to provide a quantification ground to the analysis, using the open-source software modelling tool OSeMOSYS. Three main areas are subject to analysis: first, the impact of energy efficiency and renewable energy strategies in the electricity generation mix; secondly, the potential impacts of climate change under a moderate climate change projection scenario; and finally, deriving from the latter point, the cumulative impact of an increase in water demand in the agriculture sector, for irrigation. Additionally, electricity trade dynamics are compared across the different scenarios under scrutiny, as an effort to investigate the implications of the aforementioned factors in the electricity markets in the region.

Microbiological quality of bivalves: relevance to food safety

Os moluscos bivalves constituem um recurso haliêutico de elevada importância na economia (inter)nacional pelas suas características organolépticas, valor nutritivo e relevância na gastronomia tradicional. Não obstante, representam um produto alimentar de elevado risco para a saúde pública. A contaminação microbiológica (autóctone e antropogénica), sendo crónica nos bancos de bivalves das zonas estuarino-lagunares, constitui uma das principais preocupações associadas à segurança alimentar. Aquando da filtração inerente aos processos de respiração e alimentação, os bivalves bioacumulam passivamente microrganismos incluindo os patogénicos. A sua colocação no mercado impõe pois, prévia salubrização para níveis microbiológicos compatíveis com a legislação em vigor, salvaguardando a saúde pública. Apesar da monitorização das áreas de apanha e produção, das medidas de prevenção e da depuração, a ocorrência de surtos associados ao consumo de bivalves tem aumentado. Tal deve-se à insuficiente monitorização da contaminação microbiológica dos bivalves, contribuindo para uma gestão ineficaz do produto e consequente sub-valorização. O presente trabalho pretendeu caracterizar o estado de desenvolvimento do sector de exploração de bivalves em Portugal do ponto de vista da segurança alimentar, e analisar os aspectos cruciais da monitorização e da depuração do produto apresentando alternativas abrangentes e aplicáveis ao sector. Assim, desenvolveu-se uma metodologia de base molecular passível de adaptação à monitorização dos bivalves das zonas conquícolas, como alternativa ao método de referência vigente do Número Mais Provável que é baseado apenas na quantificação de Escherichia coli. O mexilhão (Mytilus edulis) da Ria de Aveiro, bivalve de interesse comercial a nível (inter)nacional serviu de modelo para a comparação de protocolos de extração de DNA. Esta metodologia foi desenvolvida de modo a que os métodos de extração de DNA sejam passíveis de aplicação a outras matrizes biológicas ou ambientais. Para além da detecção e quantificação directa de bactérias patogénicas, esta metodologia poderá ser aplicada à monitorização da transferência vertical microbiana nos bancos de bivalves bem como à caracterização da dinâmica espacio-temporal das populações microbianas no ambiente e à monitorização dos processos de depuração. Foi ainda abordado o potencial da aplicação de bacteriófagos ou de enzimas líticas para a optimização dos processos de purificação. O trabalho realizado e as perspectivas futuras propostas pretendem contribuir para a dinamização e requalificação do sector de exploração de bivalves através da melhoria do nível de segurança alimentar dos moluscos bivalves comercializados para alimentação humana, valorizando este recurso.

Assessing the effectiveness of chemical treatment with nanomaterials in improving the quality of different industrial effluents

Industrial activities are the major sources of pollution in all environments. Depending on the type of industry, various levels of organic and inorganic pollutants are being continuously discharged into the environment. Although, several kinds of physical, chemical, biological or the combination of methods have been proposed and applied to minimize the impact of industrial effluents, few have proved to be totally effective in terms of removal rates of several contaminants, toxicity reduction or amelioration of physical and chemical properties. Hence, it is imperative to develop new and innovative methodologies for industrial wastewater treatment. In this context nanotechnology arises announcing the offer of new possibilities for the treatment of wastewaters mainly based on the enhanced physical and chemical proprieties of nanomaterials (NMs), which can remarkably increase their adsorption and oxidation potential. Although applications of NMs may bring benefits, their widespread use will also contribute for their introduction into the environment and concerns have been raised about the intentional use of these materials. Further, the same properties that make NMs so appealing can also be responsible for producing ecotoxicological effects. In a first stage, with the objective of selecting NMs for the treatment of organic and inorganic effluents we first assessed the potential toxicity of nanoparticles of nickel oxide (NiO) with two different sizes (100 and 10-20 nm), titanium dioxide (TiO2, < 25 nm) and iron oxide (Fe2O3, ≈ 85x425 nm). The ecotoxicological assessment was performed with a battery of assays using aquatic organisms from different trophic levels. Since TiO2 and Fe2O3 were the NMs that presented lower risks to the aquatic systems, they were selected for the second stage of this work. Thus, the two NMs pre-selected were tested for the treatment of olive mill wastewater (OMW). They were used as catalyst in photodegradation systems (TiO2/UV, Fe2O3/UV, TiO2/H2O2/UV and Fe2O3/H2O2/UV). The treatments with TiO2 or Fe2O3 combined with H2O2 were the most efficient in ameliorating some chemical properties of the effluent. Regarding the toxicity to V. fischeri the highest reduction was recorded for the H2O2/UV system, without NMs. Afterwards a sequential treatment using photocatalytic oxidation with NMs and degradation with white-rot fungi was applied to OMW. This new approach increased the reduction of chemical oxygen demand, phenolic content and ecotoxicity to V. fischeri. However, no reduction in color and aromatic compounds was achieved after 21 days of biological treatment. The photodegradation systems were also applied to treat the kraft pulp mill and mining effluents. For the organic effluent the combination NMs and H2O2 had the best performances in reduction the chemical parameters as well in terms of toxicity reduction. However, for the mine effluent the best (TiO2/UV and Fe2O3/UV) were only able to significantly remove three metals (Zn, Al and Cd). Nonetheless the treatments were able of reducing the toxicity of the effluent. As a final stage, the toxicity of solid wastes formed during wastewater treatment with NMs was assessed with Chironomus riparius larvae, a representative species of the sediment compartment. Certain solid wastes showed the potential to negatively affect C. riparius survival and growth, depending on the type of effluent treated. This work also brings new insights to the use of NMs for the treatment of industrial wastewaters. Although some potential applications have been announced, many evaluations have to be performed before the upscaling of the chemical treatments with NMs.