A utilização de smartphones numa experiência turística em Portugal : estudo sobre a participação nos media sociais através de aplicações para dispositivos móveis

O turismo é uma das maiores indústrias do mundo que gera receitas muito elevadas, sendo uma das principais áreas de atividade económica num número alargado de países e, por isso, torna-se essencial prestar um serviço eficiente e eficaz aproveitando, sempre que possível, as soluções e tendências tecnológicas disponíveis. A utilização dos media sociais através dos smartphones numa experiência turística vai acrescentar valor não só às viagens dos utilizadores como também ao turismo em si, pois há uma troca de experiências e opiniões entre todos os intervenientes. A presente investigação tem por objetivo geral identificar as atividades participativas realizadas por portugueses nos media sociais em smartphones nas diversas fases de uma experiência turística em Portugal, ou seja, no antes, no durante e no depois da mesma. Como hipóteses de investigação admite-se que as atividades realizadas em media sociais, o tipo de media publicado e partilhado da autoria do próprio utilizador e da autoria de terceiros e as aplicações utilizadas em smartphones diferem consoante a fase da experiência turística em que o utilizador se encontra. Assim, tornou-se essencial questionar sobre quais as atividades que são realizadas por portugueses a nível de partilha de informação através de smartphones numa experiência turística em Portugal. Apresenta-se uma análise e reflexão crítica sobre a importância da utilização dos media sociais em smartphones numa experiência turística. Primeiro procedendo-se a uma revisão do estado da arte sobre a problemática da investigação tendo como base os conceitos chave definidos anteriormente, para posteriormente fazer o estudo não só de aplicações portuguesas gratuitas para smartphones que utilizam o sistema operativo Android e que de alguma forma acrescentam valor a uma experiência turística de um utilizador, através de uma grelha de observação, mas, também, o estudo da utilização dos media sociais em smartphones numa experiência turística em Portugal, através de um inquérito por questionário. Um dos objetivos desta investigação é contribuir para o estudo e compreensão das dinâmicas de interação, a nível da partilha de informação, que os utilizadores mais recorrem nas diferentes fases de uma experiência turística e obter indicações, que se esperam úteis, sobre boas práticas e estratégias que podem ser adotadas por entidades turísticas com o objetivo de incluir os media sociais nas suas atividades de marketing e comunicação.

Operating infrastructure for an FPGA and ARM system

Advances in FPGA technology and higher processing capabilities requirements have pushed to the emerge of All Programmable Systems-on-Chip, which incorporate a hard designed processing system and a programmable logic that enable the development of specialized computer systems for a wide range of practical applications, including data and signal processing, high performance computing, embedded systems, among many others. To give place to an infrastructure that is capable of using the benefits of such a reconfigurable system, the main goal of the thesis is to implement an infrastructure composed of hardware, software and network resources, that incorporates the necessary services for the operation, management and interface of peripherals, that coompose the basic building blocks for the execution of applications. The project will be developed using a chip from the Zynq-7000 All Programmable Systems-on-Chip family.

Sectorial antennas for WSN localization system

This work investigates low cost localization systems (LS) based on received signal strength (RSS) and integrated with different types of antennas with main emphasis on sectorial antennas. The last few years have witnessed an outstanding growth in wireless sensor networks (WSN). Among its various possible applications, the localization field became a major area of research. The localization techniques based on RSS are characterized by simplicity and low cost of integration. The integration of LS based on RSS and sectorial antennas (SA) was proven to provide an effective solution for reducing the number of required nodes of the networks and allows the combination of several techniques, such as RSS and angle of arrival (AoA). This PhD thesis focuses on studying techniques, antennas and protocols that best meet the needs of each LS with main focus on low cost systems based on RSS and AoA. Firstly there are studied localization techniques and system that best suit the requirements of the user and the antennas that are most appropriate according to the nature of the signal. In this step it is intended to provide a fundamental understanding of the undertaken work. Then the developed antennas are presented according to the following categories: sectorial and microstrip antennas. Two sectorial antennas are presented: a narrowband antenna operating at 2.4 to 2.5 GHz and a broadband antenna operating at 800MHz-2.4GHz. The low cost printed antennas were designed to operate at 5 GHz, which may be used for vehicular communication. After presenting the various antennas, several prototypes of indoor/outdoor LS are implemented and analyzed. Localization protocols are also proposed, one based on simplicity and low power, and the other on interoperability with different types of antennas and system requirements.

Implementing a Videoconferencing Studio in Cape Verde to Support a Blended Learning Education System

In 2004, the Calouste Gulbenkian Foundation invited the University of Aveiro to develop an education and training program in advanced topics of ICT for Cape Verde. The focus should be on technologies to support the development of distance education. Two years later, when the program was started, the University of Aveiro had a high-performance videoconferencing Studio installed by the Foundation for National Scientific Computing. However, the investment to duplicate this high quality structure and operating costs were not compatible neither with the project’s budget nor with the technological options available in Cape Verde. This paper demonstrates the decision-making process by an economically viable option to meet the needs and local peculiarities.

Development of a single photon counting computed tomography system using MPGDs

The development of computed tomography systems with energy resolving detectors is a current challenge in medical physics and biomedical engineering. A computed tomography system of this kind allows getting complementary informations relatively to conventional systems, that can help the medical diagnosis, being of great interest in medicine. The work described in this thesis is related to the development of a computed tomography system using micropattern gaseous detectors, which allow storing, simultaneously, information about the interaction position and the energy of each single photon that interacts with the detector. This kind of detectors has other advantages concerning the cost and characteristics of operation when compared with solid state detectors. Tomographic acquisitions were performed using a MicroHole & Strip Plate based detector, which allowed reconstructing cross-sectional images using energy windows, applying the energy weighting technique and performing multi-slice and tri-dimensional reconstructions. The contrast-to-noise ratio was improved by 31% by applying the energy weighting technique, comparing with the corresponding image obtained with the current medical systems. A prototype of a computed tomography with flexibility to change the detector was developed, making it possible to apply different detectors based on Thick-COBRA. Several images acquired with these detectors are presented and demonstrate their applicability in X-ray imaging. When operating in NeCH4, the detector allowed a charge gain of 8 104, an energy resolution of 20% (full width at half maximum at 8 keV), a count rate of 1 106 Hz/mm2, a very stable operation (gain fluctuations below 5%) and a spacial resolution of 1.2 mm for an energy photon of 3.6 keV. Operating the detector in pure Kr allowed increasing the detection efficiency and achieving a charge gain of 2 104, an energy resolution of 32% (full width at half maximum at 22 keV), a count rate of 1 105 Hz/mm2, very stable operation and a spatial resolution of 500 m. The software already existing in the group was improved and tools to correct geometric misalignments of the system were also developed. The reconstructions obtained after geometrical correction are free of artefacts due to the referred misalignments.