Smart design of scaffolds obtained by biofabrication for tissue engineering applications

A engenharia de tecidos é um domínio tecnológico emergente em rápido desenvolvimento que se destina a produzir substitutos viáveis para a restauração, manutenção ou melhoria da função dos tecidos ou órgãos humanos. Uma das estratégias mais predominantes em engenharia de tecidos envolve crescimento celular sobre matrizes de suporte (scaffolds), biocompatíveis e biodegradáveis. Estas matrizes devem possuir não só elevadas propriedades mecânicas e vasculares, mas também uma elevada porosidade. Devido à incompatibilidade destes dois parâmetros, é necessário desenvolver estratégias de simulação de forma a obter estruturas optimizadas. A previsão real das propriedades mecânicas, vasculares e topológicas das matrizes de suporte, produzidas por técnicas de biofabricação, é muito importante para as diversas aplicações em engenharia de tecidos. A presente dissertação apresenta o estado da arte da engenharia de tecidos, bem como as técnicas de biofabricação envolvidas na produção de matrizes de suporte. Para o design optimizado de matrizes de suporte foi adoptada uma metodologia de design baseada tanto em métodos de elementos finitos para o cálculo do comportamento mecânico, vascular e as optimizações topológicas, como em métodos analíticos para a validação das simulações estruturais utilizando dados experimentais. Considerando que as matrizes de suporte são estruturas elementares do tipo LEGO, dois tipos de famílias foram consideradas, superfícies não periódicas e as superfícies triplas periódicas que descrevem superfícies naturais. Os objectivos principais desta dissertação são: i) avaliar as técnicas existentes de engenharia de tecidos; ii) avaliar as técnicas existentes de biofabricação para a produção de matrizes de suporte; iii) avaliar o desempenho e comportamento das matrizes de suporte; iv) implementar uma metodologia de design de matrizes de suporte em variáveis tais como a porosidade, geometria e comportamento mecânico e vascular por forma a auxiliar o processo de design; e por fim, v) validar experimentalmente a metodologia adoptada.

Integrated coastal geoengineering approach for maritime environments

This dissertation introduces several methodological approaches which integrate a proposed coastal management model in an interdisciplinary perspective. The research presented herein is displayed as a set of publications comprising different thematic outlooks. The thesis develops an integrated coastal geoengineering approach which is intrinsically linked to the studied maritime environments. From sandy coasts and marine works to rocky platforms and sea cliffs, this study includes field work between Caminha – Figueira da Foz (NW Portugal) and Galicia (NW Spain). The research also involves an analysis and geological-geotechnical characterisation of natural rock (armourstone) and artificial units (concrete blocks) applied to coastal structures. The main goal is to contribute to the characterisation and re-evaluation of georesources and to determine armourstone suitability and availability from its source (quarry). It was also important to diagnose the geomaterials in situ concerning their degradation/deterioration level on the basis of the current status of the coastal protection works in order to facilitate more efficient monitoring and maintenance, with economic benefits. In the rocky coast approach the coastal blocks were studied along the platform, but also the geoforms were studied from a coastal morphodynamics point of view. A shoreline evolution analysis was developed for sandy coasts through Digital Shoreline Analysis System (DSAS) extension. In addition, the spatial and statistical analysis applied to sea cliffs allowed the establishment of susceptibility zones to erosion and hazardous areas. All of these studies have different purposes and results however, there is a common denominator – GIS mapping. Hence, apart from the studied coastal environment, there is an integrated system which includes a sequence of procedures and methodologies that persisted during the research period. This is a step forward in the study of different coastal environments by using almost the same methodologies. This will allow the characterisation, monitoring and assessment of coastal protection works, rocky coasts, and shore platforms. With such data, it is possible to propose or recommend strategies for coastal and shoreline management based on several justifications in terms of social, economic, and environmental questions, or even provide a GIS-based planning support system reinforced by geocartographic decisions. Overall the development of the applied cartography embraces six stages which will allow the production of detailed maps of the maritime environment: (1) high-resolution aerial imagery surveys; (2) visual inspection and systematic monitoring; (3) applied field datasheet; (4) in situ evaluation; (5) scanline surveying; and (6) GIS mapping. This thesis covers fundamental matters that were developed over the course of scientific publication and as a consequence they represent the results obtained and discussed. The subjects directly related to the thesis architecture are: (i) cartography applied to coastal dynamics (including an art historical analysis as a tool to comprehend the coastal evolution and the littoral zone); (ii) georesources assessment (the role of cartography in georesources zoning, assessment and armourstone durability); (iii) coastal geoengineering applications and monitoring (Espinho pilot site in NW Portugal as an experimental field); (iv) rocky coast and shore platform studies and characterisation; (v) sandy and mixed environment approaches; (vi) coastal geosciences GIS mapping and photogrammetric surveying (coastal geoengineering); and (vii) shoreline change mapping and coastal management strategies (the CartGalicia Project as an example – NW Spain). Finally, all of these thematic areas were crucial to generate the conceptual models proposed and to shape the future of integrated coastal coastal geoengineering management.

Photonic integrated circuits development: a universal transceiver for NG-PON2

In the last years there has been a clear evolution in the world of telecommunications, which goes from new services that need higher speeds and higher bandwidth, until a role of interactions between people and machines, named by Internet of Things (IoT). So, the only technology able to follow this growth is the optical communications. Currently the solution that enables to overcome the day-by-day needs, like collaborative job, audio and video communications and share of les is based on Gigabit-capable Passive Optical Network (G-PON) with the recently successor named Next Generation Passive Optical Network Phase 2 (NG-PON2). This technology is based on the multiplexing domain wavelength and due to its characteristics and performance becomes the more advantageous technology. A major focus of optical communications are Photonic Integrated Circuits (PICs). These can include various components into a single device, which simpli es the design of the optical system, reducing space and power consumption, and improves reliability. These characteristics make this type of devices useful for several applications, that justi es the investments in the development of the technology into a very high level of performance and reliability in terms of the building blocks. With the goal to develop the optical networks of future generations, this work presents the design and implementation of a PIC, which is intended to be a universal transceiver for applications for NG-PON2. The same PIC will be able to be used as an Optical Line Terminal (OLT) or an Optical Network Unit (ONU) and in both cases as transmitter and receiver. Initially a study is made of Passive Optical Network (PON) and its standards. Therefore it is done a theoretical overview that explores the materials used in the development and production of this PIC, which foundries are available, and focusing in SMART Photonics, the components used in the development of this chip. For the conceptualization of the project di erent architectures are designed and part of the laser cavity is simulated using Aspic™. Through the analysis of advantages and disadvantages of each one, it is chosen the best to be used in the implementation. Moreover, the architecture of the transceiver is simulated block by block through the VPItransmissionMaker™ and it is demonstrated its operating principle. Finally it is presented the PIC implementation.