Valorization of solid wastes from cellulose and paper industry

This thesis reports in detail studies of industrial solid wastes valorization as alternative raw materials. All tested wastes are classified as non-hazardous and are generated in the pulp and paper process, including primary sludge, dregs, grits, lime mud and bottom ash (this generated in a process that occurs in parallel to the production of cellulose, whose aim is the production of energy to supply the plant through the combustion of forest biomass in fluidized bed). A detailed general characterization was performed at each waste and according to their characteristics, they were selected some applications in materials with potential use, specifically in Fibercement, Bituminous Mixture for regularization layer and industrial mortars (rendering mortars and cementitious-adhesive). After decided to application each waste was specifically tested to proceed the setting up of formulations containing different content of waste in replacement of the raw conventional material. As an isolated case, the bottom ash was tested not only as an alternative raw material for construction materials, but also it was tested for its use in fluidized bed in which the waste is generated as raw material. Both dregs and bottom ash had undergone special treatment to make possible to obtain a better quality of waste in order do not compromise the final product characteristics and process. The dregs were tested in bituminous mixtures as received and also washed (on the laboratory scale to remove soluble salts) and bottom ash were washed and screened in industrial scale (for removal of soluble salts, especially chlorides and coarse fraction particles elimination - particles larger than 1 mm size). The remaining residues form used in such as received avoiding additional costs. The results indicated potential and some limitations for each application to the use of these wastes as alternative raw material, but in some cases, the benefits in relation to valorization overlap with its limitations in both aspects, environmental and economic.

Accidental release of hazardous gases: modelling and assessing risk

The renewed concern in assessing risks and consequences from technological hazards in industrial and urban areas continues emphasizing the development of local-scale consequence analysis (CA) modelling tools able to predict shortterm pollution episodes and exposure effects on humans and the environment in case of accident with hazardous gases (hazmat). In this context, the main objective of this thesis is the development and validation of the EFfects of Released Hazardous gAses (EFRHA) model. This modelling tool is designed to simulate the outflow and atmospheric dispersion of heavy and passive hazmat gases in complex and build-up areas, and to estimate the exposure consequences of short-term pollution episodes in accordance to regulatory/safety threshold limits. Five main modules comprising up-to-date methods constitute the model: meteorological, terrain, source term, dispersion, and effects modules. Different initial physical states accident scenarios can be examined. Considered the main core of the developed tool, the dispersion module comprises a shallow layer modelling approach capable to account the main influence of obstacles during the hazmat gas dispersion phenomena. Model validation includes qualitative and quantitative analyses of main outputs by the comparison of modelled results against measurements and/or modelled databases. The preliminary analysis of meteorological and source term modules against modelled outputs from extensively validated models shows the consistent description of ambient conditions and the variation of the hazmat gas release. Dispersion is compared against measurements observations in obstructed and unobstructed areas for different release and dispersion scenarios. From the performance validation exercise, acceptable agreement was obtained, showing the reasonable numerical representation of measured features. In general, quality metrics are within or close to the acceptance limits recommended for ‘non-CFD models’, demonstrating its capability to reasonably predict hazmat gases accidental release and atmospheric dispersion in industrial and urban areas. EFRHA model was also applied to a particular case study, the Estarreja Chemical Complex (ECC), for a set of accidental release scenarios within a CA scope. The results show the magnitude of potential effects on the surrounding populated area and influence of the type of accident and the environment on the main outputs. Overall the present thesis shows that EFRHA model can be used as a straightforward tool to support CA studies in the scope of training and planning, but also, to support decision and emergency response in case of hazmat gases accidental release in industrial and built-up areas.

Genotoxicity in humans and indicator species exposed to uranium wastes

Os riscos dos resíduos provenientes da extração do urânio estão associados ao seu conteúdo em metais e radionuclídeos, o que levanta preocupações às autoridades governamentais e à população em geral. As populações humanas e outras espécies animais que vivem em zonas de exploração de urânio poderão estar expostas à radiação através de resíduos e poeiras radioactivase também através de água e alimentos contaminados. A determinação dos riscos deste tipo de contaminantes é feita, principalmente, através da análise química de amostras ambientais, dando-se menos importância à determinação de efeitos biológicos. A determinação de efeitos biológicos causados pela exposição a poluentes, tem-se revelado muito importante para uma avaliação da qualidade ambiental, de modo a providenciar indicações acerca dos efeitos negativos nos seres vivos e também para complementar a informação dada pelas análises químicas de amostras ambientais. Este facto levou ao estabelecimento de biomarcadores, que consistem em respostas biológicas adversas que são específicas de uma exposição a toxinas ambientais, para serem usadas como ferramentas de avaliação da qualidade ambiental. Neste trabalho foram analisadas respostas a nível molecular e celular, em minhocas, ratinhos do campo e humanos, a fim de determinar o risco químico e radiológico dos resíduos provenientes da mina de urânio da Cunha Baixa. Este trabalho teve também como objectivo a clarificação das respostas subjacentes à exposição a metais e radionuclídeos, a fim de permitir o desenvolvimento de potenciais novos biomarcadores moleculares. Durante este trabalho foram efectuados ensaios com minhocas, em que estas foram expostas durante 56 dias a solo contaminado proveniente da mina de urânio da Cunha Baixa, em laboratório e in situ. Durante a exposição foram analisados vários parâmetros, como o crescimento, reprodução, bioacumulação de metais e radionuclídeos, histopatologia, danos no DNA, citotoxicidade e perfil de expressão genética. Para além disso, foram amostrados ratinhos do campo na mina de urânio da Cunha Baixa e numa área de referência para determinação de danos no DNA, níveis de expressão e mutações em genes supressores de tumores e também bioacumulação de metais. Por fim, foram recolhidas amostras de sangue em voluntários saudáveis pertencentes à população da aldeia da Cunha Baixa, para determinação de danos no DNA, imunofenotipagem e quantificação de metais no sangue. Os resultados revelaram que as minhocas assim como os ratinhos do campo foram negativamente afetados pela exposição aos resíduos mineiros em todos os níveis de organização biológica aqui analisados, o que faz destes organismos bons indicadores para a determinação do risco destas áreas contaminadas, evidenciando o potencial risco da exposição a estes contaminantes. Para além disso, o estudo feito à população da Cunha Baixa revelou danos no ADN e diminuição de populações importantes de células imunitárias (nomeadamente linfócitos T e NK), o que poderá resultar da exposição aos resíduos da mina, tornando as pessoas mais susceptíveis ao desenvolvimento de processos de carcinogénese. O presente estudo contribuiu significativamente para a caracterização dos riscos da exposição a resíduos provenientes de minas de urânio abandonadas, evidenciando os seus efeitos negativos a nível molecular e celular, que potencialmente poderão causar instabilidade genómica e aumentar o risco de desenvolvimento de doenças genéticas.

Development of a sustainable method for the extraction of lycopene and β-carotene from food wastes

The main objective of the present work is the study of a profitable process not only in the extraction and selective separation of lycopene and β-carotene, two compounds present in tomato, but also in its potential application to food industry wastes. This is one of the industries that produce larger amounts of wastes, which are rich in high value biomolecules with great economic interest. However, the conventional methods used to extract this kind of compounds are expensive which limits their application at large scale. Lycopene and βcarotene are carotenoids with high commercial value, known for their antioxidant activity and benefits to human health. Their biggest source is tomato, one of the world’s most consumed fruits, reason for which large quantities of waste is produced. This work focuses on the study of diverse solvents with a high potential to extract carotenoids from tomato, as well as the search for more environmentally benign solvents than those currently used to extract lycopene and β-carotene from biomass. Additionally, special attention was paid to the creation of a continuous process that would allow the fractionation of the compounds for further purification. Thus, the present work started with the extraction of both carotenoids using a wide range of solvents, namely, organic solvents, conventional salts, ionic liquids, polymers and surfactants. In this stage, each solvent was evaluated in what regards their capacity of extraction as well as their penetration ability in biomass. The results collected showed that an adequate selection of the solvents may lead to the complete extraction of both carotenoids in one single step, particularly acetone and tetrahydrofuran were the most effective ones. However, the general low penetration capacity of salts, ionic liquids, polymers and surfactants makes these solvents ineffective in the solid-liquid extraction process. As the organic solvents showed the highest capacity to extract lycopene and βcarotene, in particular tetrahydrofuran and acetone, the latter solvent used in the development process of fractionation, using to this by strategic use of solvents. This step was only successfully developed through the manipulation of the solubility of each compound in ethanol and n-hexane. The results confirmed the possibility of fractionating the target compounds using the correct addition order of the solvents. Approximately, 39 % of the β-carotene was dissolved in ethanol and about 64 % of lycopene was dissolved in n-hexane, thus indicating their separation for two different solvents which shows the selective character of the developed process without any prior stage optimization. This study revealed that the use of organic solvents leads to selective extraction of lycopene and β-carotene, allowing diminishing the numerous stages involved in conventional methods. At the end, it was possible to idealize a sustainable and of high industrial relevance integrated process, nevertheless existing the need for additional optimization studies in the future.