Dependable wireless real-time communications for open environments

Wireless communication technologies have become widely adopted, appearing in heterogeneous applications ranging from tracking victims, responders and equipments in disaster scenarios to machine health monitoring in networked manufacturing systems. Very often, applications demand a strictly bounded timing response, which, in distributed systems, is generally highly dependent on the performance of the underlying communication technology. These systems are said to have real-time timeliness requirements since data communication must be conducted within predefined temporal bounds, whose unfulfillment may compromise the correct behavior of the system and cause economic losses or endanger human lives. The potential adoption of wireless technologies for an increasingly broad range of application scenarios has made the operational requirements more complex and heterogeneous than before for wired technologies. On par with this trend, there is an increasing demand for the provision of cost-effective distributed systems with improved deployment, maintenance and adaptation features. These systems tend to require operational flexibility, which can only be ensured if the underlying communication technology provides both time and event triggered data transmission services while supporting on-line, on-the-fly parameter modification. Generally, wireless enabled applications have deployment requirements that can only be addressed through the use of batteries and/or energy harvesting mechanisms for power supply. These applications usually have stringent autonomy requirements and demand a small form factor, which hinders the use of large batteries. As the communication support may represent a significant part of the energy requirements of a station, the use of power-hungry technologies is not adequate. Hence, in such applications, low-range technologies have been widely adopted. In fact, although low range technologies provide smaller data rates, they spend just a fraction of the energy of their higher-power counterparts. The timeliness requirements of data communications, in general, can be met by ensuring the availability of the medium for any station initiating a transmission. In controlled (close) environments this can be guaranteed, as there is a strict regulation of which stations are installed in the area and for which purpose. Nevertheless, in open environments, this is hard to control because no a priori abstract knowledge is available of which stations and technologies may contend for the medium at any given instant. Hence, the support of wireless real-time communications in unmanaged scenarios is a highly challenging task. Wireless low-power technologies have been the focus of a large research effort, for example, in the Wireless Sensor Network domain. Although bringing extended autonomy to battery powered stations, such technologies are known to be negatively influenced by similar technologies contending for the medium and, especially, by technologies using higher power transmissions over the same frequency bands. A frequency band that is becoming increasingly crowded with competing technologies is the 2.4 GHz Industrial, Scientific and Medical band, encompassing, for example, Bluetooth and ZigBee, two lowpower communication standards which are the base of several real-time protocols. Although these technologies employ mechanisms to improve their coexistence, they are still vulnerable to transmissions from uncoordinated stations with similar technologies or to higher power technologies such as Wi- Fi, which hinders the support of wireless dependable real-time communications in open environments. The Wireless Flexible Time-Triggered Protocol (WFTT) is a master/multi-slave protocol that builds on the flexibility and timeliness provided by the FTT paradigm and on the deterministic medium capture and maintenance provided by the bandjacking technique. This dissertation presents the WFTT protocol and argues that it allows supporting wireless real-time communication services with high dependability requirements in open environments where multiple contention-based technologies may dispute the medium access. Besides, it claims that it is feasible to provide flexible and timely wireless communications at the same time in open environments. The WFTT protocol was inspired on the FTT paradigm, from which higher layer services such as, for example, admission control has been ported. After realizing that bandjacking was an effective technique to ensure the medium access and maintenance in open environments crowded with contention-based communication technologies, it was recognized that the mechanism could be used to devise a wireless medium access protocol that could bring the features offered by the FTT paradigm to the wireless domain. The performance of the WFTT protocol is reported in this dissertation with a description of the implemented devices, the test-bed and a discussion of the obtained results.

Enhanced ethernet switching technology for adaptive hard real-time applications: Tecnologia de comutação ethernet melhorada para aplicações adaptativas e críticas de tempo-real

Os Sistemas Embarcados Distribuídos (SEDs) estão, hoje em dia, muito difundidos em vastas áreas, desde a automação industrial, a automóveis, aviões, até à distribuição de energia e protecção do meio ambiente. Estes sistemas são, essencialmente, caracterizados pela integração distribuída de aplicações embarcadas, autónomas mas cooperantes, explorando potenciais vantagens em termos de modularidade, facilidade de manutenção, custos de instalação, tolerância a falhas, entre outros. Contudo, o ambiente operacional onde se inserem estes tipos de sistemas pode impor restrições temporais rigorosas, exigindo que o sistema de comunicação subjacente consiga transmitir mensagens com garantias temporais. Contudo, os SEDs apresentam uma crescente complexidade, uma vez que integram subsistemas cada vez mais heterogéneos, quer ao nível do tráfego gerado, quer dos seus requisitos temporais. Em particular, estes subsistemas operam de forma esporádica, isto é, suportam mudanças operacionais de acordo com estímulos exteriores. Estes subsistemas também se reconfiguram dinamicamente de acordo com a actualização dos seus requisitos e, ainda, têm lidar com um número variável de solicitações de outros subsistemas. Assim sendo, o nível de utilização de recursos pode variar e, desta forma, as políticas de alocação estática tornam-se muito ineficientes. Consequentemente, é necessário um sistema de comunicação capaz de suportar com eficácia reconfigurações e adaptações dinâmicas. A tecnologia Ethernet comutada tem vindo a emergir como uma solução sólida para fornecer comunicações de tempo-real no âmbito dos SEDs, como comprovado pelo número de protocolos de tempo-real que foram desenvolvidos na última década. No entanto, nenhum dos protocolos existentes reúne as características necessárias para fornecer uma eficiente utilização da largura de banda e, simultaneamente, para respeitar os requisitos impostos pelos SEDs. Nomeadamente, a capacidade para controlar e policiar tráfego de forma robusta, conjugada com suporte à reconfiguração e adaptação dinâmica, não comprometendo as garantias de tempo-real. Esta dissertação defende a tese de que, pelo melhoramento dos comutadores Ethernet para disponibilizarem mecanismos de reconfiguração e isolamento de tráfego, é possível suportar aplicações de tempo-real críticas, que são adaptáveis ao ambiente onde estão inseridas.Em particular, é mostrado que as técnicas de projecto, baseadas em componentes e apoiadas no escalonamento hierárquico de servidores de tráfego, podem ser integradas nos comutadores Ethernet para alcançar as propriedades desejadas. Como suporte, é fornecida, também, uma solução para instanciar uma hierarquia reconfigurável de servidores de tráfego dentro do comutador, bem como a análise adequada ao modelo de escalonamento. Esta última fornece um limite superior para o tempo de resposta que os pacotes podem sofrer dentro dos servidores de tráfego, com base unicamente no conhecimento de um dado servidor e na hierarquia actual, isto é, sem o conhecimento das especifidades do tráfego dentro dos outros servidores. Finalmente, no âmbito do projecto HaRTES foi construído um protótipo do comutador Ethernet, o qual é baseado no paradigma “Flexible Time-Triggered”, que permite uma junção flexível de uma fase síncrona para o tráfego controlado pelo comutador e uma fase assíncrona que implementa a estrutura hierárquica de servidores referidos anteriormente. Além disso, as várias experiências práticas realizadas permitiram validar as propriedades desejadas e, consequentemente, a tese que fundamenta esta dissertação.

Architecture for real-time coordination of multiple autonomous mobile units

Interest on using teams of mobile robots has been growing, due to their potential to cooperate for diverse purposes, such as rescue, de-mining, surveillance or even games such as robotic soccer. These applications require a real-time middleware and wireless communication protocol that can support an efficient and timely fusion of the perception data from different robots as well as the development of coordinated behaviours. Coordinating several autonomous robots towards achieving a common goal is currently a topic of high interest, which can be found in many application domains. Despite these different application domains, the technical problem of building an infrastructure to support the integration of the distributed perception and subsequent coordinated action is similar. This problem becomes tougher with stronger system dynamics, e.g., when the robots move faster or interact with fast objects, leading to tighter real-time constraints. This thesis work addressed computing architectures and wireless communication protocols to support efficient information sharing and coordination strategies taking into account the real-time nature of robot activities. The thesis makes two main claims. Firstly, we claim that despite the use of a wireless communication protocol that includes arbitration mechanisms, the self-organization of the team communications in a dynamic round that also accounts for variable team membership, effectively reduces collisions within the team, independently of its current composition, significantly improving the quality of the communications. We will validate this claim in terms of packet losses and communication latency. We show how such self-organization of the communications can be achieved in an efficient way with the Reconfigurable and Adaptive TDMA protocol. Secondly, we claim that the development of distributed perception, cooperation and coordinated action for teams of mobile robots can be simplified by using a shared memory middleware that replicates in each cooperating robot all necessary remote data, the Real-Time Database (RTDB) middleware. These remote data copies, which are updated in the background by the selforganizing communications protocol, are extended with age information automatically computed by the middleware and are locally accessible through fast primitives. We validate our claim showing a parsimonious use of the communication medium, improved timing information with respect to the shared data and the simplicity of use and effectiveness of the proposed middleware shown in several use cases, reinforced with a reasonable impact in the Middle Size League of RoboCup.