Contribution of biomass combustion to air pollutant emissions

In Portugal, it was estimated that around 1.95 Mton/year of wood is used in residential wood burning for heating and cooking. Additionally, in the last decades, burnt forest area has also been increasing. These combustions result in high levels of toxic air pollutants and a large perturbation of atmospheric chemistry, interfere with climate and have adverse effects on health. Accurate quantification of the amounts of trace gases and particulate matter emitted from residential wood burning, agriculture and garden waste burning and forest fires on a regional and global basis is essential for various purposes, including: the investigation of several atmospheric processes, the reporting of greenhouse gas emissions, and quantification of the air pollution sources that affect human health at regional scales. In Southern Europe, data on detailed emission factors from biomass burning are rather inexistent. Emission inventories and source apportionment, photochemical and climate change models use default values obtained for US and Northern Europe biofuels. Thus, it is desirable to use more specific locally available data. The objective of this study is to characterise and quantify the contribution of biomass combustion sources to atmospheric trace gases and aerosol concentrations more representative of the national reality. Laboratory (residential wood combustion) and field (agriculture/garden waste burning and experimental wildland fires) sampling experiments were carried out. In the laboratory, after the selection of the most representative wood species and combustion equipment in Portugal, a sampling program to determine gaseous and particulate matter emission rates was set up, including organic and inorganic aerosol composition. In the field, the smoke plumes from agriculture/garden waste and experimental wildland fires were sampled. The results of this study show that the combustion equipment and biofuel type used have an important role in the emission levels and composition. Significant differences between the use of traditional combustion equipment versus modern equipments were also observed. These differences are due to higher combustion efficiency of modern equipment, reflecting the smallest amount of particulate matter, organic carbon and carbon monoxide released. With regard to experimental wildland fires in shrub dominated areas, it was observed that the largest organic fraction in the samples studied was mainly composed by vegetation pyrolysis products. The major organic components in the smoke samples were pyrolysates of vegetation cuticles, mainly comprising steradienes and sterol derivatives, carbohydrates from the breakdown of cellulose, aliphatic lipids from vegetation waxes and methoxyphenols from the lignin thermal degradation. Despite being a banned practice in our country, agriculture/garden waste burning is actually quite common. To assess the particulate matter composition, the smoke from three different agriculture/garden residues have been sampled into 3 different size fractions (PM2.5, PM2.5-10 and PM>10). Despite distribution patterns of organic compounds in particulate matter varied among residues, the amounts of phenolics (polyphenol and guaiacyl derivatives) and organic acids were always predominant over other organic compounds in the organosoluble fraction of smoke. Among biomarkers, levoglucosan, β-sitosterol and phytol were detected in appreciable amounts in the smoke of all agriculture/garden residues. In addition, inositol may be considered as an eventual tracer for the smoke from potato haulm burning. It was shown that the prevailing ambient conditions (such as high humidity in the atmosphere) likely contributed to atmospheric processes (e.g. coagulation and hygroscopic growth), which influenced the particle size characteristics of the smoke tracers, shifting their distribution to larger diameters. An assessment of household biomass consumption was also made through a national scale survey. The information obtained with the survey combined with the databases on emission factors from the laboratory and field tests allowed us to estimate the pollutant amounts emitted in each Portuguese district. In addition to a likely contribution to the improvement of emission inventories, emission factors obtained for tracer compounds in this study can be applied in receptor models to assess the contribution of biomass burning to the levels of atmospheric aerosols and their constituents obtained in monitoring campaigns in Mediterranean Europe.

Effect of light on ex situ production of symbiotic corals

The increasing interest in coral culture for biotechnological applications, to supply the marine aquarium trade, or for reef restoration programs, has prompted researchers to optimize coral culture protocols, with emphasis to ex situ production. When cultured ex situ, the growth performance of corals can be influenced by several physical, chemical and biological parameters. For corals harbouring zooxanthellae, light is one of such key factors, as it can influence the photosynthetic performance of these endosymbionts, as well as coral physiology, survival and growth. The economic feasibility of ex situ coral aquaculture is strongly dependent on production costs, namely those associated with the energetic needs directly resulting from the use of artificial lighting systems. In the present study we developed a versatile modular culture system for experimental coral production ex situ, assembled solely using materials and equipment readily available from suppliers all over the world; this approach allows researchers from different institutions to perform truly replicated experimental set-ups, with the possibility to directly compare experimental results. Afterwards, we aimed to evaluate the effect of contrasting Photosynthetically Active Radiation (PAR) levels, and light spectra emission on zooxanthellae photochemical performance, through the evaluation of the maximum quantum yield of PSII (Fv/Fm) (monitored non-invasively and non-destructively through Pulse Amplitude Modulation fluorometry, PAM), chlorophyll a content (also determined non-destructively by using the spectral reflectance index Normalized Difference Vegetation Index, NDVI), photosynthetic and accessory pigments, number of zooxanthellae, coral survival and growth. We studied two soft coral species, Sarcophyton cf. glaucum and Sinularia flexibilis, as they are good representatives of two of the most specious genera in family Alcyoniidae, which include several species with interest for biotechnological applications, as well as for the marine aquarium trade; we also studied two commercially important scleractinian corals: Acropora formosa and Stylophora pistillata. We used different light sources: hydrargyrum quartz iodide (HQI) lamps with different light color temperatures, T5 fluorescent lamps, Light Emitting Plasma (LEP) and Light Emitting Diode (LED). The results achieved revealed that keeping S. flexibilis fragments under the same light conditions as their mother colonies seems to be photobiologically acceptable for a short-term husbandry, notwithstanding the fact that they can be successfully stocked at lower PAR intensities. We also proved that low PAR intensities are suitable to support the ex situ culture S. cf. glaucum in captivity at lower production costs, since the survival recorded during the experiment was 100%, the physiological wellness of coral fragments was evidenced, and we did not detect significant differences in coral growth. Finally, we concluded that blue light sources, such as LED lighting, allow a higher growth for A. formosa and S. pistillata, and promote significant differences on microstructure organization and macrostructure morphometry in coral skeletons; these findings may have potential applications as bone graft substitutes for veterinary and/or other medical uses. Thus, LED technology seems to be a promising option for scleractinian corals aquaculture ex situ.

Hydrological and photochemical influence on dynamics of estuarine bacteria

Os estuários são ecossistemas complexos, onde os processos físicos, químicos e biológicos estão intimamente ligados. A dinâmica bacteriana num estuário reflete a interação e a elevada variação temporal e espacial desses processos. Este trabalho teve como objetivo elucidar as interações entre os processos físicos, fotoquímicos e microbiológicos no sistema estuarino da Ria de Aveiro (Portugal). Para tal, foi realizada uma abordagem inicial no campo, durante a qual as comunidades bacterianas na coluna de água foram caracterizadas em termos de abundância e atividade ao longo de 2 anos. O estudo foi realizado em dois locais distintos, escolhidos por tipificarem as características marinhas e salobras do estuário. Estes locais possuem diferentes hidrodinâmicas, influências fluviais e, quantidade e composição de matéria orgânica. Numa perspectiva mecanicista, foram realizadas simulações laboratoriais no sentido de elucidar a resposta das bactérias à matéria orgânica foto-transformada. As comunidades bacterianas no estuário adaptam-se a diferentes regimes de água doce, desenvolvendo padrões de abundância e atividade distintos nas zonas marinha e salobra. Os elevados caudais dos rios induzem estratificação vertical na zona marinha, promovendo o fluxo de fitoplâncton do mar para o estuário, do bacterioplâncton do estuário para o mar, e estimulam a importação de bactérias aderentes a partículas na zona salobra. O transporte advectivo e os processos de ressuspensão contribuem para aumentar 3 vezes o número de bactérias aderentes a partículas durante os períodos de intensas descargas fluviais. Adicionalmente, a atividade bacteriana no estuário é controlada pela concentração de azoto inerente à variações de água doce. O fornecimento de azoto em associação com a fonte dos substratos bacterianos induzem alterações significativas na produtividade. O padrão de variação vertical de comunidades bacterianas foi distinto nas duas zonas do estuário. Na zona marinha, as bactérias na microcamada superficial (SML) apresentaram taxas de hidrólise mais elevadas, mas menores taxas de incorporação de monómeros e produção de biomassa que na água subjacente (UW), enquanto na zona salobra, as taxas de hidrólise e incorporação foram similares nos dois compartimentos, mas a produtividade foi significativamente mais elevada na SML. Apesar da abundância bacteriana ter sido semelhante na SML e UW, a fração de células aderentes a partículas foi significativamente maior na SML (2-3 vezes), em ambas as zonas do estuário. A integração dos resultados microbiológicos com as variáveis ambientais e hidrológicos mostraram que fortes correntes na zona marinha promovem a mistura vertical, inibindo o estabelecimento de uma comunidade bacteriana na SML distinta da UW. Em contraste, na zona de água salobra, a menor velocidades das correntes fornece as condições adequadas ao aumento da atividade bacteriana na SML. Características específicas do local, tais como a hidrodinâmica e as fontes e composição da matéria orgânica, conduzem também a diferentes graus de enriquecimento superficial de matéria orgânica e inorgânica, influenciando a sua transformação. Em geral, o ambiente da SML estuarina favorece a hidrólise de polímeros, mas inibe a utilização de monómeros, comparativamente com água subjacente. No entanto, as diferenças entre as duas comunidades tendem a atenuar-se com o aumento da atividade heterotrófica na zona salobra. A matéria orgânica dissolvida cromófora (CDOM) das duas zonas do estuário possui diferentes características espectrais, com maior aromaticidade e peso molecular médio (HMW) na zona de água salobra, em comparação com a zona marinha. Nesta zona, a abundância bacteriana correlacionou-se com a350 e a254, sugerindo uma contribuição indireta das bactéria para HMW CDOM. A irradiação do DOM resultou numa diminuição dos valores de a254 e a350, e, em um aumento do declive S275-295 e dos rácios E2:E3 (a250/a365) e SR. No entanto, a extensão de transformações foto-induzidas e as respostas microbianas são dependentes das características iniciais CDOM, inferidas a partir das suas propriedades ópticas. A dinâmica estuarina influencia claramente as atividades heterotróficas e a distribuição dos microorganismos na coluna de água. A entrada de água doce influencia a dinâmica e os principais reguladores das comunidades bacterianas no estuário. Os processos fotoquímicos e microbianos produzem alterações nas propriedades ópticas da CDOM e a combinação desses processos determina o resultado global e o destino da CDOM nos sistemas estuarinos com influência na produtividade nas áreas costeiras adjacente.