Relação do aroma e da espuma dos vinhos espumantes com o potencial enológico das uvas e dos vinhos

Os espumantes produzidos segundo o método Champanhês são obtidos após uma segunda fermentação em garrafa. Quando o vinho é vertido no copo, o CO2 produzido é libertado, sendo a espuma formada o resultado da sua interacção com os constituintes do vinho. A quantidade e a estabilidade da espuma do vinho espumante estão relacionadas com a sua composição química. Para além da espuma, o aroma é também um parâmetro importante de qualidade na apreciação geral de um vinho espumante. O aroma de um vinho espumante provém do contributo das uvas assim como do processo fermentativo. Dependendo do estado de maturação da uva, o contributo dos compostos voláteis para o aroma é diferente. Em virtude da vindima para os vinhos espumantes ser realizada antes da vindima para os vinhos maduros, dependendo da variedade, as uvas poderão não ser colhidas na expressão máxima do seu aroma, podendo verificar-se uma perda significativa do seu potencial varietal volátil. O objectivo desta dissertação é relacionar o aroma e a espuma dos vinhos espumantes com o potencial enológico das uvas e dos vinhos. Para isso, foi estudada a composição volátil das duas castas principais da Bairrada, a casta branca Fernão-Pires (FP) e a casta tinta Baga (BG), sendo estas duas das castas usadas para a produção de espumante. Para estudar a composição volátil das uvas durante a maturação, com vista a avaliar este efeito na expressão máxima de compostos voláteis, foi optimizada para este propósito a metodologia de microextracção em fase sólida em espaço de cabeça (HS-SPME). As uvas foram colhidas semanalmente, em duas vinhas, do pintor à pós-maturidade sendo posteriormente analisadas pela metodologia de HS-SPME seguida de cromatografia de gás acoplada à espectrometria de massa com quadrupolo (GC–qMS). No caso das uvas BG, observou-se um aumento acentuado na expressão máxima de compostos voláteis próximo da maturidade da uva determinada pelo teor em açúcar e acidez titulável, mantendo-se constante durante a pós-maturidade. Na determinação do perfil volátil das uvas ao longo da maturação foram identificados 66 compostos varietais nas uvas provenientes de uma vinha (Pedralvites) e 45 da outra vinha (Colégio). Em ambas as vinhas foram identificados 23 sesquiterpenóides, 13 monoterpenóides, 6 norisoprenóides, 2 álcoois aromáticos e 1 diterpenóide. Os sesquiterpenóides, devido à sua abundância em número e em área cromatográfica, podem ser considerados marcadores da casta BG. As uvas FP apresentaram um comportamento diferente do das uvas BG, sendo a expressão máxima de compostos voláteis expressa durante um curto período de tempo (1 semana), que coincide com a maturidade da uva. Depois de atingido este pico, observa-se uma diminuição drástica logo na semana seguinte. Este comportamento foi observado em ambas as vinhas, onde foram identificados 20 compostos voláteis varietais e 5 pré-fermentativos (álcoois e aldeídos em C6). Estes resultados mostram que quando estas castas são colhidas precocemente (1 semana antes da maturidade) para a produção de espumante, é observada uma redução significativa do potencial volátil que é expresso na maturidade. Para a análise da composição volátil dos vinhos espumantes foi optimizada uma metodologia de microextracção que permite usar uma maior quantidade de fase estacionária, a extracção sorptiva em barra de agitação (SBSE). O método foi optimizado usando 10 padrões de compostos voláteis representativos das principais famílias químicas presentes no vinho, nomeadamente, ésteres, monoterpenóides, sesquiterpenóides, norisoprenóides em C13 e álcoois. O método proposto apresenta uma boa linearidade (r2 > 0,982) e a reprodutibilidade varia entre 8,9 e 17,8%. Os limites de detecção para a maioria dos compostos é bastante baixo, entre 0,05 e 9,09 μg L-1. O método foi aplicado para a análise da composição volátil dos vinhos espumantes. Dentro dos vinhos espumantes analisados, foi estudada a influência da casta, do tipo de solo e do estado de maturação das uvas na sua composição volátil. A casta FP pode dar origem a vinhos com maior potencial de aroma do que a casta BG. Relativamente à avaliação dos diferentes estados de maturação, verificou-se que as uvas da maturidade e as da colheita tardia (uma semana depois da maturidade) deram origem aos vinhos com maior quantidade de compostos voláteis. Para os três tipos de solo estudados (arenoso, argiloso e argilo-calcário), o vinho obtido a partir de uvas colhidas no solo argilo-calcário foi o que mostrou a maior concentração de compostos voláteis varietais. A espuma destes vinhos espumantes foi também avaliada quanto à sua quantidade máxima (HM) e tempo de estabilidade (TS). O vinho espumante que apresentou um maior TS foi o vinho produzido a partir da casta FP proveniente de uma colheita tardia e solo argiloso. Os vinhos provenientes dos solos arenosos e argilo-calcários são os que apresentaram valores mais baixos de TS. Com vista a avaliar quais os conjuntos de moléculas do vinho que estão relacionados com as propriedades da espuma e possíveis sinergismos entre eles, para cada vinho espumante foi separada a fracção hidrofóbica de baixo peso molecular (MeLMW), a fracção de elevado peso molecular (HMW) e duas fracções de peso molecular intermédio (AqIMW e MeIMW). As propriedades da espuma dos vinhos modelo, reconstituídos com estas fracções e suas misturas, foram avaliadas. A combinação da fracção HMW com a MeLMW aumentou o TS 2,7 vezes quando comparado com o observado para a fracção HMW isoladamente, produzindo um efeito sinergético. Este aumento do TS ainda foi maior quando se combinou a fracção HMW com as subfracções obtidas a partir da fracção MeLMW, principalmente para as fracções menos apolares. A subfracção hidrofóbica menos apolar foi caracterizada por espectrometria de massa de ionização por electrospray (ESI-MS/MS) tendo sido identificada uma série de oligómeros de polietileno glicol e um potencial composto tensioactivo, o 8-hidroxi-tridecanoato de dietilenoglicolglicerilacetato. A fracção MeLMW foi também isolada da espuma do vinho espumante e caracterizada por ESI-MS/MS, permitindo identificar vários compostos potenciais tensioactivos, nomeadamente, dois monoacilgliceróis e quatro derivados de ácidos gordos com gliceriletilenoglicol. Estes resultados confirmam que estes compostos relacionados com a estabilidade da espuma existem em maior número na espuma do que no vinho. O vinho foi ainda fraccionado em 12 grupos de moléculas: 3 fracções de manoproteínas, 3 de arabinogalactanas, 3 de misturas de polissacarídeos, proteínas e compostos fenólicos e 3 fracções de peso molecular intermédio e baixo, compostas por uma mistura de hidratos de carbono, peptídeos e compostos fenólicos. Foram usados vinhos modelo reconstituídos com cada uma das fracções isoladas na concentração em que estas se encontraram no vinho. Foram também efectuados ensaios com soluções modelo dez vezes mais concentradas e com misturas de algumas das fracções. Todas as soluções formadas foram avaliadas quanto às propriedades da espuma. O aumento da concentração para dez vezes faz com que a solução contendo a fracção rica em manoproteínas (MP1) aumente para mais do dobro a HM e 7,4 vezes mais o TS. A combinação entre a fracção MP1 e a MeLMW produziu um aumento significativo nos parâmetros de HM e TS. A combinação da fracção HMW (manoproteínas com baixo teor em proteína) com a MeLMW (tensioactivos derivados de ácidos gordos com gliceriletilenoglicol) contém os compostos chave de um vinho espumante para se obter uma maior quantidade e estabilidade da espuma.

Volatile terpenoids and C13 norisoprenoids in wines: development of rapid methods of analysis and evaluation of the sesquiterpenoids biological potential

Vitis vinifera L., the most widely cultivated fruit crop in the world, was the starting point for the development of this PhD thesis. This subject was exploited following on two actual trends: i) the development of rapid, simple, and high sensitive methodologies with minimal sample handling; and ii) the valuation of natural products as a source of compounds with potential health benefits. The target group of compounds under study were the volatile terpenoids (mono and sesquiterpenoids) and C13 norisoprenoids, since they may present biological impact, either from the sensorial point of view, as regards to the wine aroma, or by the beneficial properties for the human health. Two novel methodologies for quantification of C13 norisoprenoids in wines were developed. The first methodology, a rapid method, was based on the headspace solid-phase microextraction combined with gas chromatography-quadrupole mass spectrometry operating at selected ion monitoring mode (HS-SPME/GC-qMS-SIM), using GC conditions that allowed obtaining a C13 norisoprenoid volatile signature. It does not require any pre-treatment of the sample, and the C13 norisoprenoid composition of the wine was evaluated based on the chromatographic profile and specific m/z fragments, without complete chromatographic separation of its components. The second methodology, used as reference method, was based on the HS-SPME/GC-qMS-SIM, allowing the GC conditions for an adequate chromatographic resolution of wine components. For quantification purposes, external calibration curves were constructed with β-ionone, with regression coefficient (r2) of 0.9968 (RSD 12.51 %) and 0.9940 (RSD of 1.08 %) for the rapid method and for the reference method, respectively. Low detection limits (1.57 and 1.10 μg L-1) were observed. These methodologies were applied to seventeen white and red table wines. Two vitispirane isomers (158-1529 L-1) and 1,1,6-trimethyl-1,2-dihydronaphthalene (TDN) (6.42-39.45 μg L-1) were quantified. The data obtained for vitispirane isomers and TDN using the two methods were highly correlated (r2 of 0.9756 and 0.9630, respectively). A rapid methodology for the establishment of the varietal volatile profile of Vitis vinifera L. cv. 'Fernão-Pires' (FP) white wines by headspace solid-phase microextraction combined with comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry (HS-SPME/GCxGC-TOFMS) was developed. Monovarietal wines from different harvests, Appellations, and producers were analysed. The study was focused on the volatiles that seem to be significant to the varietal character, such as mono and sesquiterpenic compounds, and C13 norisoprenoids. Two-dimensional chromatographic spaces containing the varietal compounds using the m/z fragments 93, 121, 161, 175 and 204 were established as follows: 1tR = 255-575 s, 2tR = 0,424-1,840 s, for monoterpenoids, 1tR = 555-685 s, 2tR = 0,528-0,856 s, for C13 norisoprenoids, and 1tR = 695-950 s, 2tR = 0,520-0,960 s, for sesquiterpenic compounds. For the three chemical groups under study, from a total of 170 compounds, 45 were determined in all wines, allowing defining the "varietal volatile profile" of FP wine. Among these compounds, 15 were detected for the first time in FP wines. This study proposes a HS-SPME/GCxGC-TOFMS based methodology combined with classification-reference sample to be used for rapid assessment of varietal volatile profile of wines. This approach is very useful to eliminate the majority of the non-terpenic and non-C13 norisoprenic compounds, allowing the definition of a two-dimensional chromatographic space containing these compounds, simplifying the data compared to the original data, and reducing the time of analysis. The presence of sesquiterpenic compounds in Vitis vinifera L. related products, to which are assigned several biological properties, prompted us to investigate the antioxidant, antiproliferative and hepatoprotective activities of some sesquiterpenic compounds. Firstly, the antiradical capacity of trans,trans-farnesol, cis-nerolidol, α-humulene and guaiazulene was evaluated using chemical (DPPH• and hydroxyl radicals) and biological (Caco-2 cells) models. Guaiazulene (IC50= 0.73 mM) was the sesquiterpene with higher scavenger capacity against DPPH•, while trans,trans-farnesol (IC50= 1.81 mM) and cis-nerolidol (IC50= 1.48 mM) were more active towards hydroxyl radicals. All compounds, with the exception of α-humulene, at non-cytotoxic levels (≤ 1 mM), were able to protect Caco-2 cells from oxidative stress induced by tert-butyl hydroperoxide. The activity of the compounds under study was also evaluated as antiproliferative agents. Guaiazulene and cis-nerolidol were able to more effectively arrest the cell cycle in the S-phase than trans,trans-farnesol and α-humulene, being the last almost inactive. The relative hepatoprotection effect of fifteen sesquiterpenic compounds, presenting different chemical structures and commonly found in plants and plant-derived foods and beverages, was assessed. Endogenous lipid peroxidation and induced lipid peroxidation with tert-butyl hydroperoxide were evaluated in liver homogenates from Wistar rats. With the exception of α-humulene, all the sesquiterpenic compounds under study (1 mM) were effective in reducing the malonaldehyde levels in both endogenous and induced lipid peroxidation up to 35% and 70%, respectively. The developed 3D-QSAR models, relating the hepatoprotection activity with molecular properties, showed good fit (R2LOO > 0.819) with good prediction power (Q2 > 0.950 and SDEP < 2%) for both models. A network of effects associated with structural and chemical features of sesquiterpenic compounds such as shape, branching, symmetry, and presence of electronegative fragments, can modulate the hepatoprotective activity observed for these compounds. In conclusion, this study allowed the development of rapid and in-depth methods for the assessment of varietal volatile compounds that might have a positive impact on sensorial and health attributes related to Vitis vinifera L. These approaches can be extended to the analysis of other related food matrices, including grapes and musts, among others. In addition, the results of in vitro assays open a perspective for the promising use of the sesquiterpenic compounds, with similar chemical structures such as those studied in the present work, as antioxidants, hepatoprotective and antiproliferative agents, which meets the current challenges related to diseases of modern civilization.

Silver nanoparticles flow in an aquatic trophic chain

Silver nanoparticles (AgNP) have been produced and applied in a variety of products ranging from personal care products to food package containers, clothing and medicine utilities. The antimicrobial function of AgNP makes it very useful to be applied for such purposes. Silver (Ag) is a non-essential metal for organisms, and it has been historically present in the environment at low concentrations. Those concentrations of silver increased in the last century due to the use of Ag in the photographic industry and lately are expected to increase due to the use of AgNPs in consumer products. The presence of AgNP in the aquatic environment may pose a risk for aquatic species, and the effects can vary from lethal to sublethal effects. Moreover, the contact of aquatic organisms with AgNP may not cause immediately the death of individuals but it can be accumulated inside the animals and consequently transferred within the food chain. Considering this, the objective of this work was to study the transfer of silver nanoparticles in comparison to silver ions, which was used as silver nitrate, within an aquatic food chain model. To achieve this goal, this study was divided into four steps: the toxicity assessment of AgNP and AgNO3 to aquatic test-species, the bioaccumulation assessment of AgNP and AgNO3 by Pseudokirchneriella subcapitata and Daphnia magna under different exposure scenarios, and finally the evaluation of the trophic transfer of Ag through an experimental design that included the goldfish Carassius auratus in a model trophic chain in which all the species were exposed to the worse-case scenario. We observed that the bioconcentration of Ag by P. subcapitata is mainly driven by ionic silver, and that algae cannot internalize these AgNPs, but it does internalizes dissolved Ag. Daphnia magna was exposed to AgNP and AgNO3 through different exposure routes: water, food and both water and food. The worse-case scenario for Daphnia Ag bioaccumulation was by the joint exposure of contaminated water and food, showing that Ag body burdens were higher for AgNPs than for AgNO3. Finally, by exposing C. auratus for 10 days through contaminated water and food (supplied as D. magna), with another 7 days of depuration phase, it was concluded that the 10 days of exposure were not enough for fish to reach a plateau on Ag internal concentration, and neither the 7 days of elimination were sufficient to cause total depuration of the accumulated Ag. Moreover, a higher concentration of Ag was found in the intestine of fish when compared with other organs, and the elimination rate constant of AgNP in the intestine was very low. Although a potential for trophic transfer of AgNP cannot be suggested based in the data acquired in this study, there is still a potential environmental risk for aquatic species.

Development of a single photon counting computed tomography system using MPGDs

The development of computed tomography systems with energy resolving detectors is a current challenge in medical physics and biomedical engineering. A computed tomography system of this kind allows getting complementary informations relatively to conventional systems, that can help the medical diagnosis, being of great interest in medicine. The work described in this thesis is related to the development of a computed tomography system using micropattern gaseous detectors, which allow storing, simultaneously, information about the interaction position and the energy of each single photon that interacts with the detector. This kind of detectors has other advantages concerning the cost and characteristics of operation when compared with solid state detectors. Tomographic acquisitions were performed using a MicroHole & Strip Plate based detector, which allowed reconstructing cross-sectional images using energy windows, applying the energy weighting technique and performing multi-slice and tri-dimensional reconstructions. The contrast-to-noise ratio was improved by 31% by applying the energy weighting technique, comparing with the corresponding image obtained with the current medical systems. A prototype of a computed tomography with flexibility to change the detector was developed, making it possible to apply different detectors based on Thick-COBRA. Several images acquired with these detectors are presented and demonstrate their applicability in X-ray imaging. When operating in NeCH4, the detector allowed a charge gain of 8 104, an energy resolution of 20% (full width at half maximum at 8 keV), a count rate of 1 106 Hz/mm2, a very stable operation (gain fluctuations below 5%) and a spacial resolution of 1.2 mm for an energy photon of 3.6 keV. Operating the detector in pure Kr allowed increasing the detection efficiency and achieving a charge gain of 2 104, an energy resolution of 32% (full width at half maximum at 22 keV), a count rate of 1 105 Hz/mm2, very stable operation and a spatial resolution of 500 m. The software already existing in the group was improved and tools to correct geometric misalignments of the system were also developed. The reconstructions obtained after geometrical correction are free of artefacts due to the referred misalignments.