Sondagens mecânicas e prospecção geofísica na caracterização de fluidos

Esta dissertação aborda a utilização de métodos geofísicos de superfície e de profundidade na caracterização de fluidos, compreendendo várias abordagens distintas, consoante o tipo de temática em análise. Assim, o assunto proposto para a presente dissertação relaciona-se com a utilização conjunta de sondagens mecânicas e prospecção geofísica na caracterização de fluidos através da exploração de três temáticas distintas, designadamente a Hidrogeologia, a Geotermia e o Ambiente. O presente trabalho de dissertação baseado na experiência profissional da autora, é feito de acordo com o estabelecimento de uma linha condutora, fundamentada e estruturada, para uma visão global do modo como a interpretação integrada das sondagens mecânicas e dos métodos geofísicos dá um forte contributo para a melhoria do conhecimento de uma região, seja ele geológico, hidrogeológico ou ambiental. Os temas a abordar foram seleccionados não só pela sua indiscutível importância, devido ao interesse estratégico que actualmente suscitam, como também pelos diferentes modos de processar e interpretar a informação geofísica adquirida consoante os objectivos da mesma, de forma a salientar particularidades na respectiva interpretação e integração de dados.

Characterization of water-soluble organic matter from urban aerosols

Water-soluble organic matter (WSOM) from atmospheric particles comprises a complex array of molecular structures that play an important role on the physic-chemical properties of atmospheric particles and, therefore, are linked to several global-relevant atmospheric processes which impact the climate and public health. Due to the large variety of sources and formation processes, adequate knowledge on WSOM composition and its effects on the properties of atmospheric aerosol are still limited. Therefore, this thesis aims at providing new insights on the molecular composition of WSOM from fine atmospheric aerosols typical of an urban area (Aveiro, Portugal). In a first step, adsorption phenomena of semivolatile organic compounds on quartz fibre filters employed in the collection of atmospheric aerosols were assessed. Afterwards, atmospheric aerosol samples were collected during fifteen months, on a weekly basis. A mass balance of aerosol samples was performed in order to set the relative contribution of elemental carbon, WSOM and water-insoluble organic matter to the aerosol mass collected at the urban area of Aveiro, with a special focus on the assessment of the influence of different meteorological conditions. In order to assess the chemical complexity of the WSOM from urban aerosols, their structural characteristics were studied by means of Fourier transform infrared infrared - Attenuated Total Reflectance (FTIR-ATR) and solid-state cross polarization with magic angle spinning 13C nuclear magnetic resonance (CPMAS 13C NMR) spectroscopies, as well as their elemental composition. The structural characterization of aerosol WSOM samples collected in the urban area highlighted a highly complex mixture of functional groups. It was concluded that aliphatic and aromatic structures, hydroxyl groups and carboxyl groups are characteristic to all samples. The semi-quantitative assessment of the CPMAS 13C NMR data showed different distributions of the various functional groups between the aerosol samples collected at different seasons. Moreover, the presence of signals typical of lignin-derived structures in both CPMAS 13C NMR and FTIR-ATR spectra of the WSOM samples from the colder seasons, highlights the major contribution of biomass burning processes in domestic fireplaces, during low temperature conditions, into the bulk chemical properties of WSOM from urban aerosols. A comprehensive two-dimensional liquid chromatography (LC x LC) method, on-line coupled to a diode array, fluorescence, and evaporative light scattering detectors, was employed for resolving the chemical heterogeneity of the aerosol WSOM samples and, simultaneously, to map the hydrophobicity versus the molecular weight distribution of the samples. The LC x LC method employed a mixed-mode hydrophilic interaction column operating under aqueous reversed phase mode in the first dimension, and a size-exclusion column in the second dimension, which was found to be useful for separating the aerosol WSOM samples into various fractions with distinct molecular weight and hydrophobic features. The estimative of the average molecular weight (Mw) distribution of the urban aerosol WSOM samples ranged from 48 to 942 Da and from 45 to 1241 Da in terms of UV absorption and fluorescence detection, respectively. Findings suggest that smaller Mw group fractions seem to be related to a more hydrophobic nature.

Organic contaminants in urban soils: major inputs and potential risks

Urban soil quality may be severely affected by hydrophobic organic contaminants (HOCs), impairing environmental quality and human health. A comprehensive study was conducted in two contrasting Portuguese urban areas (Lisbon and Viseu) in order to assess the levels and potential risks of these contaminants, to identify sources and study their behaviour in soils. The concentrations of HOCs were related to the size of the city, with much higher contamination levels observed in Lisbon urban area. Source apportionment was performed by studying the HOCs profiles, their relationship with potentially toxic elements and general characteristics of soil using multivariate statistical methods. Lisbon seems to be affected by nearby sources (traffic, industry and incineration processes) whereas in Viseu the atmospheric transport may be playing an important role. In a first tier of risk assessment (RA) it was possible to identify polycyclic aromatic hydrocarbons (PAHs) in Lisbon soils as a potential hazard. The levels of PAHs in street dusts were further studied and allowed to clarify that traffic, tire and pavement debris can be an important source of PAHs to urban soils. Street dusts were also identified as being a potential concern regarding human and environmental health, especially if reaching the nearby aquatic bodies. Geostatistical tools were also used and their usefulness in a RA analysis and urban planning was discussed. In order to obtain a more realistic assessment of risks of HOCs to environment and human health it is important to evaluate their available fraction, which is also the most accessible for organisms. Therefore, a review of the processes involved on the availability of PAHs was performed and the outputs produced by the different chemical methods were evaluated. The suitability of chemical methods to predict bioavailability of PAHs in dissimilar naturally contaminated soils has not been demonstrated, being especially difficult for high molecular weight compounds. No clear relationship between chemical and biological availability was found in this work. Yet, in spite of the very high total concentrations found in some Lisbon soils, both the water soluble fraction and the body residues resulting from bioaccumulation assays were generally very low, which may be due to aging phenomena. It was observed that the percentage of soluble fraction of PAHs in soils was found to be different among compounds and mostly regulated by soil properties. Regarding bioaccumulation assays, although no significant relationship was found between soil properties and bioavailability, it was verified that biota-to-soil bioaccumulation factors were sample dependent rather than compound dependent. In conclusion, once the compounds of potential concern are targeted, then performing a chemical screening as a first tier can be a simple and effective approach to start a RA. However, reliable data is still required to improve the existing models for risk characterization.

Understanding and modelling hydrological and soil erosion processes in burnt forest catchments

Forest fires implications in overland flow and soil erosion have been researched for several years. Therefore, is widely known that fires enhance hydrological and geomorphological activity worldwide as also in Mediterranean areas. Soil burn severity has been widely used to describe the impacts of fire on soils, and has being recognized as a decisive factor controlling post-fire erosion rates. However, there is no unique definition of the term and the relationship between soil burn severity and post-fire hydrological and erosion response has not yet been fully established. Few studies have assessed post-fire erosion over multiple years, and the authors are aware of none which assess runoff. Small amount of studies concerning pre-fire management practices were also found. In the case of soil erosion models, the Revised Universal Soil Loss Equation (RUSLE) and the revised Morgan–Morgan–Finney (MMF) are well-known models, but not much information is available as regards their suitability in predicting post-fire soil erosion in forest soils. The lack of information is even more pronounced as regards post-fire rehabilitation treatments. The aim of the thesis was to perform an extensive research under the post fire hydrologic and erosive response subject. By understanding the effect of burn severity in ecosystems and its implications regarding post fire hydrological and erosive responses worldwide. Test the effect of different pre-fire land management practices (unplowed, downslope plowed and contour plowed) and time-since-fire, in the post fire hydrological and erosive response, between the two most common land uses in Portugal (pine and eucalypt). Assess the performance of two widely-known erosion models (RUSLE and Revised MMF), to predict soil erosion rates during first year following two wildfires of distinctive burn severity. Furthermore, to apply these two models considering different post-fire rehabilitation treatments in an area severely affected by fire. Improve model estimations of post-fire runoff and erosion rates in two different land uses (pine and eucalypt) using the revised MMF. To assess these improvements by comparing estimations and measurements of runoff and erosion, in two recently burned sites, as also with their post fire rehabilitation treatments. Model modifications involved: (1) focusing on intra-annual changes in parameters to incorporate seasonal differences in runoff and erosion; and (2) inclusion of soil water repellency in runoff predictions. Additionally, validate these improvements with the application of the model to other pine and eucalypt sites in Central Portugal. The review and meta-analysis showed that fire occurrence had a significant effect on the hydrological and erosive response. However, this effect was only significantly higher with increasing soil burn severity for inter-rill erosion, and not for runoff. This study furthermore highlighted the incoherencies between existing burn severity classifications, and proposed an unambiguous classification. In the case of the erosion plots with natural rainfall, land use factor affected annual runoff while land management affected both annual runoff and erosion amounts significantly. Time-since-fire had an important effect in erosion amounts among unplowed sites, while for eucalypt sites time affected both annual runoff and erosion amounts. At all studied sites runoff coefficients increase over the four years of monitoring. In the other hand, sediment concentration in the runoff, recorded a decrease during the same period. Reasons for divergence from the classic post-fire recovery model were also explored. Short fire recurrence intervals and forest management practices are viewed as the main reasons for the observed severe and continuing soil degradation. The revised MMF model presented reasonable accuracy in the predictions while the RUSLE clearly overestimated the observed erosion rates. After improvements: the revised model was able to predict first-year post-fire plot-scale runoff and erosion rates for both forest types, these predictions were improved both by the seasonal changes in the model parameters; and by considering the effect of soil water repellency on the runoff, individual seasonal predictions were considered accurate, and the inclusion of the soil water repellency in the model also improved the model at this base. The revised MMF model proved capable of providing a simple set of criteria for management decisions about runoff and erosion mitigation measures in burned areas. The erosion predictions at the validation sites attested both to the robustness of the model and of the calibration parameters, suggesting a potential wider application.

Granitos Variscos do Centro Norte de Portugal

A Cadeia Varisca Europeia, formada no final do Paleozóico, estende-se desde a Europa de Leste até à Península Ibérica e inclui extensas áreas ocupadas por rochas graníticas, representando, por isso, uma das regiões do globo em que mais se têm investigado os processos de reciclagem e acreção crustal em contexto de colisão continental. O Maciço Ibérico constitui o segmento mais ocidental do orógeno varisco europeu e uma das áreas onde a actividade plutónica está mais bem expressa e mostra uma maior diversidade tipológica. No Maciço Ibérico, em particular na Zona Centro Ibérica (ZCI), a intrusão de rochas granitóides de idade varisca está preferencialmente associada com a terceira fase de deformação (D3). De acordo com as suas relações com este evento de deformação, os granitóides da ZCI foram subdivididos em dois grandes grupos: sin-D3 e tardi-pós-D3. Em termos petrográficos e geoquímicos, os maciços graníticos sin- e tardi-pós-D3 têm sido integrados em duas séries principais: (a) a série dos granitos de duas micas e dos leucogranitos fortemente peraluminosos e (b) a série dos monzogranitos e granodioritos, metaluminosos a fracamente peraluminosos, com biotite ± anfíbola. Os granitos da primeira série apresentam uma filiação de tipo S e resultam da anatexia de materiais supracrustais durante o clímax de metamorfismo regional, enquanto.os granitóides da segunda série exibem características transicionais I-S e têm sido interpretados, quer como produtos da hibridização de magmas félsicos crustais com magmas básicos de proveniência mantélica, quer como resultantes da anatexia de protólitos metaígneos da crosta inferior. O trabalho realizado no batólito das Beiras revela que o clímax de metamorfismo regional foi atingido neste sector durante um evento extensional (D2), que foi acompanhado por intensa migmatização. No ínício da D3, o volume de fundidos crustais já seria suficientemente grande (ca. 15-35%) para que pudesse ocorrer a sua separação do resíduo sólido. Assim, durante a tectónica transcorrente D3, dá-se a ascenção, diferenciação e consolidação de abundantes quantidades de magmas graníticos, fortemente peraluminosos e isotopicamente evoluídos (tipo-S), que vêm a originar enormes batólitos de leucogranitos de duas micas, com idades entre 317-312 Ma. No final da D3, com a progressiva substituição do manto litosférico pela astenosfera, mais quente, diminui a densidade da coluna litosférica e ocorre o levantamento isostático e exumação da crusta. A fusão por descompressão da astenosfera gera líquidos básicos que hibridizam com os fundidos félsicos crustais, em proporções variáveis, e produzem magmas metaluminosos a ligeiramente peraluminosos, de afinidade calco-alcalina. A ascenção destes magmas terá tido lugar nos últimos estádios da deformação transcorrente e a sua instalação no nível crustal final ocorre após a D3, dando origem aos inúmeros maciços compósitos de granitóides biotíticos híbridos tardi-pós-cinemáticos, presentes no batólito das Beiras. Os dados de campo mostram que estes granitóides são intrusivos nos plutões sin-D3, cortam as estruturas regionais e provocam metamorfismo de contacto nas sequências do Carbónico Superior. Com base nas idades U-Pb obtidas em zircões e monazites, é possível datar este importante período de plutonismo granítico com 306-294 Ma. A assinatura geoquímica e isotópica dos granitóides híbridos tardi-pós-D3 revela que, para além da mistura de componentes com proveniência distinta (manto empobrecido e crusta continental), a sua evolução foi, em grande parte, controlada por processos de cristalização fraccionada (modelo AFC).

Plutonismo granítico varisco no Centro Norte de Portugal

O complexo batolítico das Beiras está localizado na Zona Centro Ibérica (ZCI), no centro norte de Portugal. É predominantemente composto por rochas granitóides instaladas em metassedimentos de idade Neoproterozóica - Câmbrica Inferior, Ordovícica e Carbonífera Superior, durante ou após a última fase de deformação dúctil varisca (D3). No seu conjunto, as rochas granitóides do Batólito das Beiras cobrem um amplo espectro de idades (sin-, tardi- e tardi-pós-D3) e tipologias (tipo S e transicionais I-S). Neste trabalho apresentam-se dados petrográficos, mineralógicos, geoquímicos e isotópicos para estas intrusões e discutem-se os principais processos envolvidos na sua génese.

Enquadramento cartográfico do Complexo de Granja (NW Ceará, Brasil) e avaliação de sistemas de referenciação geográfica

Este estudo destaca os benefícios da análise metódica da cartografia de base que suporta a produção de Cartografia Geológica. Em certas regiões, as cartas base publicadas estão ainda associadas a redes geodésicas clássicas e, com frequência, são introduzidos erros quando se desconsideram parâmetros essenciais como a Projecção Cartográfica e o Datum Geodésico. Com o uso sistemático dos dispositivos de GPS e dos Sistemas de Informação Geográfica para a elaboração das cartas geológicas, é imprescindível o conhecimento prévio do Sistema de Coordenadas ao qual devem estar ajustados os dados geo-espaciais. Neste estudo de caso, as diferenças e os erros associados à aquisição de coordenadas entre os Data geocêntricos WGS84 e SIRGAS2000 são residuais, atendendo aos parâmetros das cartas base, à região do globo, o campo de acção e a escala, minimizando assim a propagação de erros de posicionamento e georreferenciação subsequentes.

U-Pb SHRIMP zircon dating of high-grade rocks from the Upper Allochthonous Terrane of Bragança and Morais Massifs (NE Portugal); geodynamic consequences

Bragança and Morais Massifs are part of the mega-klippen ensemble of NW Iberia, comprising a tectonic pile of four allochthonous units stacked above the Central-Iberian Zone autochthon. On top of this pile, the Upper Allochthonous Terrane (UAT) includes different high-grade metamorphic series whose age and geodynamic meaning are controversial. Mafic granulites provided U–Pb zircon ages at 399±7 Ma, dating the Variscan emplacement of UAT. In contrast,U–Pb zircon ages of ky- and hb-eclogites, felsic/intermediate HP/HT-granulites and orthogneisses (ca. 500–480 Ma) are identical to those of gabbros (488 ± 10 Ma) and Grt-pyroxenites (495 ± 8 Ma) belonging to a mafic/ultramafic igneous suite that records upper mantle melting and mafic magma crustal underplating at these times. Gabbros intrude the high-grade units of UAT and did not underwent the HP metamorphic event experienced by eclogites and granulites. These features and the zircon dates resemblance among different lithologies, suggest that extensive age resetting of older events may have been correlative with the igneous suite emplacement/crystallisation. Accordingly, reconciliation of structural, petrological and geochronological evidence implies that the development and early deformation of UAT high-grade rocks should be ascribed to an orogenic cycle prior to ≈500 Ma. Undisputable dating of this cycle is impossible, but the sporadic vestiges of Cadomian ages cannot be disregarded. The ca. 500–480 Ma time-window harmonises well with the Lower Palaeozoic continental rifting that trace the VariscanWilson Cycle onset and the Rheic Ocean opening. Subsequent preservation of the high heat-flowregime, possibly related to the Palaeotethys back-arc basin development (ca. 450–420 Ma), would explain the 461 ± 10 Ma age yielded by some zircon domains in felsic granulites, conceivably reflecting zircon dissolution/ recrystallisation till Ordovician times, long before the Variscan paroxysm (ca. 400–390 Ma). This geodynamic scenario suggests also that UAT should have been part of Armorica before its emplacement on top of Iberia after Palaeotethys closure.

Impacte ambiental da viticultura do Douro na qualidade dos solos, sedimentos e águas

A atividade vitícola praticada na região do Douro é uma das mais importantes atividades agrícolas do país, não só devido a fatores socioculturais, como também pelo seu valor económico. A Região Demarcada do Douro (RDD) é uma das regiões vitícolas mais antiga do mundo, onde é produzido um dos vinhos generosos mais famosos do mundo, o Vinho do Porto. Contudo, no cultivo intensivo da vinha, o uso recorrente a pesticidas para o controlo de pragas das vinhas pode ter repercussões a nível da qualidade dos solos e dos cursos de água na envolvente às vinhas. O presente estudo foi desenvolvido numa área-piloto da sub-região Baixo Corgo da RDD, com o intuito de averiguar os possíveis efeitos e estimar os prováveis riscos ambientais promovidos pela viticultura. Foram selecionadas três vinhas, com idades de plantação distintas, onde foram recolhidas amostras de solos à superfície, tendo-se ainda feito uma recolha de amostras de água, sedimentos e águas intersticiais dos rios e da barragem na envolvente da área de estudo. Diferentes parâmetros químicos e físico-químicos foram analisados para uma avaliação global da área e prováveis fontes dos elementos. Especial destaque foi dado ao Cu, C, P, N, NO3 e S quer pelos teores anómalos e elevada variação espacial, quer pela sua importância como traçadores das atividades vitícolas e alguns como potenciais contaminantes. O Cu é o elemento potencialmente contaminante com mais destaque, visto que os seus teores são consideravelmente elevados nos solos e, a par, o P e N tendem a apresentar teores mais elevados na vinha mais velha, o que pode indicar efeitos de acumulação. Já os nitratos são mais elevados na vinha mais nova, visto que os processos de acumulação são mais difíceis neste caso devido à sua alta solubilidade e mobilidade. Apesar da elevada aplicação de S nas vinhas, os teores nestes solos são mais baixos do que nos solos sem atividades vitícolas, o que pode dever-se à sua baixa temperatura de sublimação e migração para níveis mais profundos dos solos. As baixas concentrações determinadas nos sedimentos e águas permitem concluir que as práticas vitícolas não parecem estar a interferir na qualidade dos mesmos. Contudo, novas campanhas de amostragem, abrangendo períodos sazonais distintos e próximos de épocas de aplicação de fertilizantes e pesticidas, deverão ser realizadas para validação temporal destes resultados.