Ecotoxicological tests using Chironomus riparius

Os sistemas aquáticos naturais podem estar sujeitos frequentemente a entrada de tóxicos, quer seja através da lixiviação dos campos agrícolas ou da descarga por parte de unidades industriais. Avaliar o impacto potencial destes contaminantes nos sistemas aquáticos é muito importante, porque pode promover consequências sérias no balanço ecológico dos ecossistemas. Os efeitos de níveis sub-letais destes tóxicos nas populações aquáticas são detectados, em muitos casos, somente após diversas gerações, dependendo da espécie e do contaminante. O comportamento animal é considerado como sendo a primeira linha de defesa perante estímulos ambientais, e pode ser uma representação de alterações fisiológicas no organismo, sendo portanto um indicador excelente de alterações ambientais. O desenvolvimento dos sistemas de aviso prévio que integram parâmetros comportamentais pode ajudar a prever mais rapidamente possíveis alterações ao nível das populações naturais, do que a utilização de testes ecotoxicológicos padrão com a mesma finalidade. O conhecimento acerca de possíveis implicações devido a alterações comportamentais, em organismos bentónicos e em populações do campo sujeitas a tóxicos, é ainda escasso. Sabendo isto, neste estudo pretendeu-se investigar como o comportamento de Chironomus riparius – usando um biomonitor em tempo real – e outros parâmetros tais como crescimento, emergência de adultos, bioacumulação e biomarcadores, são afectados pela exposição a imidacloprid e ao mercúrio, que foram seleccionados como contaminantes. Os resultados demonstraram que a exposição às concentrações sub-letais de imidacloprid afecta o crescimento e o comportamento dos quironomídeos e que estes organismos podem recuperar de uma exposição curta ao insecticida. O comportamento que corresponde à ventilação de C. riparius revelou-se como um parâmetro mais sensível do que a locomoção e do que as respostas bioquímicas, quando as larvas foram sujeitas ao imidacloprid. Larvas de C. riparius expostas a concentrações sub-letais de mercúrio apresentaram uma tendência de diminuição de actividade comportamental, em testes com concentrações crescentes do tóxico; o crescimento das larvas foi também prejudicado, e as taxas de emergência de adultos e o tempo de desenvolvimento apresentaram retardamento. Estes organismos podem bioacumular rapidamente o mercúrio em condições de não alimentação e apresentam uma lenta depuração deste metal. Estes efeitos podem, em último caso, conduzir a prováveis repercussões ao nível da população e das comunidades. As reduções em actividades comportamentais, mesmo em concentrações baixas, podem diminuir a quantidade de tempo gasta na procura de alimento, produzindo efeitos aos níveis morfo-fisiológicos, e assim afectar severamente o desempenho dos quironomídeos no ambiente. O uso destes factores comportamentais como um parâmetro ecotoxicológico sub-letal relevante ao nível da toxicologia aumentará a versatilidade dos testes, permitindo uma resposta comportamental mensurável e quantitativa ao nível do organismo, utilizando uma avaliação não destrutiva, e assim certificando que esta aproximação pode ser usada em testes ecotoxicológicos futuros.

Toxicidade de químicos em mistura: o caso da albufeira do Alqueva

In the environment humans and biota are generally exposed to chemical mixtures rather than individual chemicals. Therefore, when assessing the environmental risk of chemicals, it is important to consider chemical mixtures and their possible interactions. The main objective of this work focused on the environmental risk assessment of pesticides found in the water of the Alqueva reservoir and their binary combinations. In this aquatic ecosystem several pesticides were above of the environmental quality standards. But in addition, there were several sampling points of the reservoir where ecotoxicity was observed despite the presence of these contaminants at low concentrations. Here, a component-based approach was used to assess the effects of the pesticide mixtures. The effects of the binary combinations of four herbicides, atrazine (ATR), terbuthylazine (TER), simazine (SIM) and metolachlor (MET), on the growth rate of the microalgae Pseudokirchneriella subcapitata and the effects of the binary combinations of the s-triazine herbicides ATR and TER and the insecticide chlorpyrifos (CPF) on the swimming behaviour and acetylcholinesterase (AChE) activity of the zebrafish Danio rerio were assessed using the two reference models of concentration addition (CA) and independent action (IA). Moreover, the combined effects of the herbicides (ATR, TER and MET) and the insecticide CPF were also tested on the swimming behaviour and AChE activity of the aquatic midge Chironomus riparius after the cholinesterases characterization. In this risk characterization, the calculated risk quotients for the herbicides ATR, TER, SIM and MET were higher than 1, meaning that these herbicides present a high risk for the Alqueva ecosystem. As expected, the microalgae P. subcapitata was the most sensitive species to the herbicides. However, despite these herbicides pose no or low risk to other aquatic organisms tested in this study, with EC50 values much higher than the concentrations found in this aquatic ecosystem, they are able to increase the toxic effects of CPF when they are tested in binary mixtures. Moreover, the risk quotients of mixtures of these herbicides present simultaneously in three different locations of the reservoir were also higher than 1, so this confirms the fact that these herbicides when present in mixtures, present a greater risk for this ecosystem than the expected considering each single chemical by its own.

Assessing the effectiveness of chemical treatment with nanomaterials in improving the quality of different industrial effluents

Industrial activities are the major sources of pollution in all environments. Depending on the type of industry, various levels of organic and inorganic pollutants are being continuously discharged into the environment. Although, several kinds of physical, chemical, biological or the combination of methods have been proposed and applied to minimize the impact of industrial effluents, few have proved to be totally effective in terms of removal rates of several contaminants, toxicity reduction or amelioration of physical and chemical properties. Hence, it is imperative to develop new and innovative methodologies for industrial wastewater treatment. In this context nanotechnology arises announcing the offer of new possibilities for the treatment of wastewaters mainly based on the enhanced physical and chemical proprieties of nanomaterials (NMs), which can remarkably increase their adsorption and oxidation potential. Although applications of NMs may bring benefits, their widespread use will also contribute for their introduction into the environment and concerns have been raised about the intentional use of these materials. Further, the same properties that make NMs so appealing can also be responsible for producing ecotoxicological effects. In a first stage, with the objective of selecting NMs for the treatment of organic and inorganic effluents we first assessed the potential toxicity of nanoparticles of nickel oxide (NiO) with two different sizes (100 and 10-20 nm), titanium dioxide (TiO2, < 25 nm) and iron oxide (Fe2O3, ≈ 85x425 nm). The ecotoxicological assessment was performed with a battery of assays using aquatic organisms from different trophic levels. Since TiO2 and Fe2O3 were the NMs that presented lower risks to the aquatic systems, they were selected for the second stage of this work. Thus, the two NMs pre-selected were tested for the treatment of olive mill wastewater (OMW). They were used as catalyst in photodegradation systems (TiO2/UV, Fe2O3/UV, TiO2/H2O2/UV and Fe2O3/H2O2/UV). The treatments with TiO2 or Fe2O3 combined with H2O2 were the most efficient in ameliorating some chemical properties of the effluent. Regarding the toxicity to V. fischeri the highest reduction was recorded for the H2O2/UV system, without NMs. Afterwards a sequential treatment using photocatalytic oxidation with NMs and degradation with white-rot fungi was applied to OMW. This new approach increased the reduction of chemical oxygen demand, phenolic content and ecotoxicity to V. fischeri. However, no reduction in color and aromatic compounds was achieved after 21 days of biological treatment. The photodegradation systems were also applied to treat the kraft pulp mill and mining effluents. For the organic effluent the combination NMs and H2O2 had the best performances in reduction the chemical parameters as well in terms of toxicity reduction. However, for the mine effluent the best (TiO2/UV and Fe2O3/UV) were only able to significantly remove three metals (Zn, Al and Cd). Nonetheless the treatments were able of reducing the toxicity of the effluent. As a final stage, the toxicity of solid wastes formed during wastewater treatment with NMs was assessed with Chironomus riparius larvae, a representative species of the sediment compartment. Certain solid wastes showed the potential to negatively affect C. riparius survival and growth, depending on the type of effluent treated. This work also brings new insights to the use of NMs for the treatment of industrial wastewaters. Although some potential applications have been announced, many evaluations have to be performed before the upscaling of the chemical treatments with NMs.