Relação do aroma e da espuma dos vinhos espumantes com o potencial enológico das uvas e dos vinhos

Os espumantes produzidos segundo o método Champanhês são obtidos após uma segunda fermentação em garrafa. Quando o vinho é vertido no copo, o CO2 produzido é libertado, sendo a espuma formada o resultado da sua interacção com os constituintes do vinho. A quantidade e a estabilidade da espuma do vinho espumante estão relacionadas com a sua composição química. Para além da espuma, o aroma é também um parâmetro importante de qualidade na apreciação geral de um vinho espumante. O aroma de um vinho espumante provém do contributo das uvas assim como do processo fermentativo. Dependendo do estado de maturação da uva, o contributo dos compostos voláteis para o aroma é diferente. Em virtude da vindima para os vinhos espumantes ser realizada antes da vindima para os vinhos maduros, dependendo da variedade, as uvas poderão não ser colhidas na expressão máxima do seu aroma, podendo verificar-se uma perda significativa do seu potencial varietal volátil. O objectivo desta dissertação é relacionar o aroma e a espuma dos vinhos espumantes com o potencial enológico das uvas e dos vinhos. Para isso, foi estudada a composição volátil das duas castas principais da Bairrada, a casta branca Fernão-Pires (FP) e a casta tinta Baga (BG), sendo estas duas das castas usadas para a produção de espumante. Para estudar a composição volátil das uvas durante a maturação, com vista a avaliar este efeito na expressão máxima de compostos voláteis, foi optimizada para este propósito a metodologia de microextracção em fase sólida em espaço de cabeça (HS-SPME). As uvas foram colhidas semanalmente, em duas vinhas, do pintor à pós-maturidade sendo posteriormente analisadas pela metodologia de HS-SPME seguida de cromatografia de gás acoplada à espectrometria de massa com quadrupolo (GC–qMS). No caso das uvas BG, observou-se um aumento acentuado na expressão máxima de compostos voláteis próximo da maturidade da uva determinada pelo teor em açúcar e acidez titulável, mantendo-se constante durante a pós-maturidade. Na determinação do perfil volátil das uvas ao longo da maturação foram identificados 66 compostos varietais nas uvas provenientes de uma vinha (Pedralvites) e 45 da outra vinha (Colégio). Em ambas as vinhas foram identificados 23 sesquiterpenóides, 13 monoterpenóides, 6 norisoprenóides, 2 álcoois aromáticos e 1 diterpenóide. Os sesquiterpenóides, devido à sua abundância em número e em área cromatográfica, podem ser considerados marcadores da casta BG. As uvas FP apresentaram um comportamento diferente do das uvas BG, sendo a expressão máxima de compostos voláteis expressa durante um curto período de tempo (1 semana), que coincide com a maturidade da uva. Depois de atingido este pico, observa-se uma diminuição drástica logo na semana seguinte. Este comportamento foi observado em ambas as vinhas, onde foram identificados 20 compostos voláteis varietais e 5 pré-fermentativos (álcoois e aldeídos em C6). Estes resultados mostram que quando estas castas são colhidas precocemente (1 semana antes da maturidade) para a produção de espumante, é observada uma redução significativa do potencial volátil que é expresso na maturidade. Para a análise da composição volátil dos vinhos espumantes foi optimizada uma metodologia de microextracção que permite usar uma maior quantidade de fase estacionária, a extracção sorptiva em barra de agitação (SBSE). O método foi optimizado usando 10 padrões de compostos voláteis representativos das principais famílias químicas presentes no vinho, nomeadamente, ésteres, monoterpenóides, sesquiterpenóides, norisoprenóides em C13 e álcoois. O método proposto apresenta uma boa linearidade (r2 > 0,982) e a reprodutibilidade varia entre 8,9 e 17,8%. Os limites de detecção para a maioria dos compostos é bastante baixo, entre 0,05 e 9,09 μg L-1. O método foi aplicado para a análise da composição volátil dos vinhos espumantes. Dentro dos vinhos espumantes analisados, foi estudada a influência da casta, do tipo de solo e do estado de maturação das uvas na sua composição volátil. A casta FP pode dar origem a vinhos com maior potencial de aroma do que a casta BG. Relativamente à avaliação dos diferentes estados de maturação, verificou-se que as uvas da maturidade e as da colheita tardia (uma semana depois da maturidade) deram origem aos vinhos com maior quantidade de compostos voláteis. Para os três tipos de solo estudados (arenoso, argiloso e argilo-calcário), o vinho obtido a partir de uvas colhidas no solo argilo-calcário foi o que mostrou a maior concentração de compostos voláteis varietais. A espuma destes vinhos espumantes foi também avaliada quanto à sua quantidade máxima (HM) e tempo de estabilidade (TS). O vinho espumante que apresentou um maior TS foi o vinho produzido a partir da casta FP proveniente de uma colheita tardia e solo argiloso. Os vinhos provenientes dos solos arenosos e argilo-calcários são os que apresentaram valores mais baixos de TS. Com vista a avaliar quais os conjuntos de moléculas do vinho que estão relacionados com as propriedades da espuma e possíveis sinergismos entre eles, para cada vinho espumante foi separada a fracção hidrofóbica de baixo peso molecular (MeLMW), a fracção de elevado peso molecular (HMW) e duas fracções de peso molecular intermédio (AqIMW e MeIMW). As propriedades da espuma dos vinhos modelo, reconstituídos com estas fracções e suas misturas, foram avaliadas. A combinação da fracção HMW com a MeLMW aumentou o TS 2,7 vezes quando comparado com o observado para a fracção HMW isoladamente, produzindo um efeito sinergético. Este aumento do TS ainda foi maior quando se combinou a fracção HMW com as subfracções obtidas a partir da fracção MeLMW, principalmente para as fracções menos apolares. A subfracção hidrofóbica menos apolar foi caracterizada por espectrometria de massa de ionização por electrospray (ESI-MS/MS) tendo sido identificada uma série de oligómeros de polietileno glicol e um potencial composto tensioactivo, o 8-hidroxi-tridecanoato de dietilenoglicolglicerilacetato. A fracção MeLMW foi também isolada da espuma do vinho espumante e caracterizada por ESI-MS/MS, permitindo identificar vários compostos potenciais tensioactivos, nomeadamente, dois monoacilgliceróis e quatro derivados de ácidos gordos com gliceriletilenoglicol. Estes resultados confirmam que estes compostos relacionados com a estabilidade da espuma existem em maior número na espuma do que no vinho. O vinho foi ainda fraccionado em 12 grupos de moléculas: 3 fracções de manoproteínas, 3 de arabinogalactanas, 3 de misturas de polissacarídeos, proteínas e compostos fenólicos e 3 fracções de peso molecular intermédio e baixo, compostas por uma mistura de hidratos de carbono, peptídeos e compostos fenólicos. Foram usados vinhos modelo reconstituídos com cada uma das fracções isoladas na concentração em que estas se encontraram no vinho. Foram também efectuados ensaios com soluções modelo dez vezes mais concentradas e com misturas de algumas das fracções. Todas as soluções formadas foram avaliadas quanto às propriedades da espuma. O aumento da concentração para dez vezes faz com que a solução contendo a fracção rica em manoproteínas (MP1) aumente para mais do dobro a HM e 7,4 vezes mais o TS. A combinação entre a fracção MP1 e a MeLMW produziu um aumento significativo nos parâmetros de HM e TS. A combinação da fracção HMW (manoproteínas com baixo teor em proteína) com a MeLMW (tensioactivos derivados de ácidos gordos com gliceriletilenoglicol) contém os compostos chave de um vinho espumante para se obter uma maior quantidade e estabilidade da espuma.

Embryonic and larval ecology and biochemistry of offshore decapods

Understanding the biology of offshore species is hardened by the difficulties of sampling in the deep-sea environment. Additionally, due to the vastness of the open ocean, knowledge of early life histories of pelagic larvae is still relatively scarce. In decapod species with bentho-pelagic lifestyle, the transition from life in the seafloor to the water column not only is associated with drastic morphological metamorphosis, but also with changes in behavior and feeding ecology. The purpose of the present thesis was to investigate physiological, biochemical and behavioral adaptation occurring during early development of such species. The Norway lobster, Nephrops norvegicus, and the crab Monodaeus couchi were used as a model as these two species are encountered off the NE Atlantic shelf at depth greater than 300 m. Chapter 1 introduces the challenges faced by both adult and larvae inhabiting such remote habitats, including the effect of food availability on development and oceanographic processes on dispersal and recruitment. The thesis follows early life histories, starting with within-brood variability in the fatty acid (FA) profile displayed by developing N. norvegicus embryos. There were no differences in the FA composition of embryos sampled from both sides of the brooding chamber in most females. However, all females exhibited significant differences in the FA profiles of embryos sampled from different pleopods. Potential causes for the variations recorded may be differential female investment during oocyte production or shifts in FA catabolism during the incubation period promoted by embryo’s location within the brooding chamber. Next, feeding rates and digestive enzymes activity of the early stage larvae was investigated in N. norvegicus. Both stages were able to maximize food intake when larvae were scarce and showed increased feeding rate following periods of starvation. Amylase activity indicated that carbohydrates are not the primary energy reserve and that feeding may be required soon after hatching to trigger amylase activity. Protease activity indicated that protein reserves are catabolized under starvation. These results indicate that larvae may maximize prey ingestion in the presence of plankton patches with higher food abundance and minimize the deleterious effects induced by previous periods of intermittent starvation or unsuitable prey densities/types. Additionally, changes in enzymatic activity may allow newly hatched N. norvegicus larvae to metabolize protein reserves to overcome short-term starvation. Vertical migration behavior and the influence of oceanographic properties were studied next. All zoeal stages of M. couchi displayed reverse diel vertical migration. Abundance of early stages was correlated with chlorophyll a levels. An ontogenic shift in vertical distribution explained the results; earlier zoeal stages remain in the food-rich upper water column while later stages migrate to the bottom for settlement. This vertical migration behavior is likely to affect horizontal distribution of larvae. Indeed, global current patterns will result in low inter-annual variations in decapod larvae recruitment, but short term variations such as upwelling events will cause deviation from the expected dispersal pattern. Throughout development, from the embryo to metamorphosis into benthic juvenile, offshore decapods face many challenges. For the developing individual survivorship will depend heavily on food availability but also on the reserves passed on by the mother. Even though vertical migration behavior can allow the larvae to take advantage of depth varying currents for transport, the effect of general circulation pattern will superimpose local current and influence feeding conditions and affect dispersal and recruitment.

Contribution of biomass combustion to air pollutant emissions

In Portugal, it was estimated that around 1.95 Mton/year of wood is used in residential wood burning for heating and cooking. Additionally, in the last decades, burnt forest area has also been increasing. These combustions result in high levels of toxic air pollutants and a large perturbation of atmospheric chemistry, interfere with climate and have adverse effects on health. Accurate quantification of the amounts of trace gases and particulate matter emitted from residential wood burning, agriculture and garden waste burning and forest fires on a regional and global basis is essential for various purposes, including: the investigation of several atmospheric processes, the reporting of greenhouse gas emissions, and quantification of the air pollution sources that affect human health at regional scales. In Southern Europe, data on detailed emission factors from biomass burning are rather inexistent. Emission inventories and source apportionment, photochemical and climate change models use default values obtained for US and Northern Europe biofuels. Thus, it is desirable to use more specific locally available data. The objective of this study is to characterise and quantify the contribution of biomass combustion sources to atmospheric trace gases and aerosol concentrations more representative of the national reality. Laboratory (residential wood combustion) and field (agriculture/garden waste burning and experimental wildland fires) sampling experiments were carried out. In the laboratory, after the selection of the most representative wood species and combustion equipment in Portugal, a sampling program to determine gaseous and particulate matter emission rates was set up, including organic and inorganic aerosol composition. In the field, the smoke plumes from agriculture/garden waste and experimental wildland fires were sampled. The results of this study show that the combustion equipment and biofuel type used have an important role in the emission levels and composition. Significant differences between the use of traditional combustion equipment versus modern equipments were also observed. These differences are due to higher combustion efficiency of modern equipment, reflecting the smallest amount of particulate matter, organic carbon and carbon monoxide released. With regard to experimental wildland fires in shrub dominated areas, it was observed that the largest organic fraction in the samples studied was mainly composed by vegetation pyrolysis products. The major organic components in the smoke samples were pyrolysates of vegetation cuticles, mainly comprising steradienes and sterol derivatives, carbohydrates from the breakdown of cellulose, aliphatic lipids from vegetation waxes and methoxyphenols from the lignin thermal degradation. Despite being a banned practice in our country, agriculture/garden waste burning is actually quite common. To assess the particulate matter composition, the smoke from three different agriculture/garden residues have been sampled into 3 different size fractions (PM2.5, PM2.5-10 and PM>10). Despite distribution patterns of organic compounds in particulate matter varied among residues, the amounts of phenolics (polyphenol and guaiacyl derivatives) and organic acids were always predominant over other organic compounds in the organosoluble fraction of smoke. Among biomarkers, levoglucosan, β-sitosterol and phytol were detected in appreciable amounts in the smoke of all agriculture/garden residues. In addition, inositol may be considered as an eventual tracer for the smoke from potato haulm burning. It was shown that the prevailing ambient conditions (such as high humidity in the atmosphere) likely contributed to atmospheric processes (e.g. coagulation and hygroscopic growth), which influenced the particle size characteristics of the smoke tracers, shifting their distribution to larger diameters. An assessment of household biomass consumption was also made through a national scale survey. The information obtained with the survey combined with the databases on emission factors from the laboratory and field tests allowed us to estimate the pollutant amounts emitted in each Portuguese district. In addition to a likely contribution to the improvement of emission inventories, emission factors obtained for tracer compounds in this study can be applied in receptor models to assess the contribution of biomass burning to the levels of atmospheric aerosols and their constituents obtained in monitoring campaigns in Mediterranean Europe.

Catalytic routes to convert saccharides to furanic aldehydes

The conversion of plant biomass-derived carbohydrates (preferably non-edible) into added-value products is envisaged to be at the core of the future biorefineries. Carbohydrates are the most abundant natural organic polymers on Earth. This work deals with the chemical valorisation of plant biomass, focusing on the acid-catalysed conversion of carbohydrates (mono and polysaccharides) to furanic aldehydes, namely 2-furaldehyde (Fur) and 5-hydroxymethyl-2-furaldehyde (Hmf), which are valuable platform chemicals that have the potential to replace a variety of oil derived chemicals and materials. The investigated reaction systems can be divided into two types depending on the solvent used to dissolve the carbohydrates in the reaction medium: water or ionic liquid-based systems. The reaction temperatures were greater than 150 ºC when the solvent was water, and lower than 150 º C in the cases of the ionic liquid-based catalytic systems. As alternatives to liquid acids (typically used in the industrial production of Fur), solid acid catalysts were investigated in these reaction systems. Aiming at the identification of (soluble and insoluble) reaction products, complementary characterisation techniques were used namely, FT-IR spectroscopy, liquid and solid state NMR spectroscopy, TGA, DSC and GC´GC-ToFMS analyses. Complex mixtures of soluble reaction products were obtained and different types of side reactions may occur. The requirements to be put on the catalysts for these reaction systems partly depend on the type of carbohydrates to be converted and the reaction conditions used. The thermal stability is important due to the fact that formation of humins and catalyst coking phenomena are characteristically inherent to these types of reactions systems leading to the need to regenerate the catalyst which can be effectively accomplished by calcination. Special attention was given to fully inorganic nanoporous solid acids, amorphous or crystalline, and consisting of nano to micro-size particles. The investigated catalysts were silicoaluminophosphates, aluminosilicates and zirconium-tungsten mixed oxides which are versatile catalysts in that their physicochemical properties can be fine-tuned to improve the catalytic performances in the conversion of different substrates (e.g. introduction of mesoporosity and modification of the acid properties). The catalytic systems consisting of aluminosilicates as solid acids and water as solvent seem to be more effective in converting pentoses and related polysaccharides into Fur, than hexoses and related polysaccharides into Hmf. The investigated solid acids exhibited fairly good hydrothermal stabilities. On the other hand, ionic liquid-based catalytic systems can allow reaching simultaneously high Fur and Hmf yields, particularly when Hmf is obtained from D-fructose and related polysaccharides; however, catalyst deactivation occurs and the catalytic reactions take place in homogeneous phase. As pointed out in a review of the state of the art on this topic, the development of truly heterogeneous ionic liquid-based catalytic systems for producing Fur and Hmf in high yields remains a challenge.

A computational study of ionic liquids used in the production of fuels and biofuels

For the past decades it has been a worldwide concern to reduce the emission of harmful gases released during the combustion of fossil fuels. This goal has been addressed through the reduction of sulfur-containing compounds, and the replacement of fossil fuels by biofuels, such as bioethanol, produced in large scale from biomass. For this purpose, a new class of solvents, the Ionic Liquids (ILs), has been applied, aiming at developing new processes and replacing common organic solvents in the current processes. ILs can be composed by a large number of different combinations of cations and anions, which confer unique but desired properties to ILs. The ability of fine-tuning the properties of ILs to meet the requirements of a specific application range by mixing different cations and anions arises as the most relevant aspect for rendering ILs so attractive to researchers. Nonetheless, due to the huge number of possible combinations between the ions it is required the use of cheap predictive approaches for anticipating how they will act in a given situation. Molecular dynamics (MD) simulation is a statistical mechanics computational approach, based on Newton’s equations of motion, which can be used to study macroscopic systems at the atomic level, through the prediction of their properties, and other structural information. In the case of ILs, MD simulations have been extensively applied. The slow dynamics associated to ILs constitutes a challenge for their correct description that requires improvements and developments of existent force fields, as well as larger computational efforts (longer times of simulation). The present document reports studies based on MD simulations devoted to disclose the mechanisms of interaction established by ILs in systems representative of fuel and biofuels streams, and at biomass pre-treatment process. Hence, MD simulations were used to evaluate different systems composed of ILs and thiophene, benzene, water, ethanol and also glucose molecules. For the latter molecules, it was carried out a study aiming to ascertain the performance of a recently proposed force field (GROMOS 56ACARBO) to reproduce the dynamic behavior of such molecules in aqueous solution. The results here reported reveal that the interactions established by ILs are dependent on the individual characteristics of each IL. Generally, the polar character of ILs is deterministic in their propensity to interact with the other molecules. Although it is unquestionable the advantage of using MD simulations, it is necessary to recognize the need for improvements and developments of force fields, not only for a successful description of ILs, but also for other relevant compounds such as the carbohydrates.

Structural analysis of glycans and development of microarrays from Helcobacter pylori cell surface glycome

Helicobacter pylori is a bacterial pathogen that affects more than half of the world’s population with gastro-intestinal diseases and is associated with gastric cancer. The cell surface of H. pylori is decorated with lipopolysaccharides (LPSs) composed of three distinct regions: a variable polysaccharide moiety (O-chain), a structurally conserved core oligosaccharide, and a lipid A region that anchors the LPS to the cell membrane. The O-chain of H. pylori LPS, exhibits unique oligosaccharide structures, such as Lewis (Le) antigens, similar to those present in the gastric mucosa and are involved in interactions with the host. Glucan, heptoglycan, and riban domains are present in the outer core region of some H. pylori LPSs. Amylose-like glycans and mannans are also constituents of some H. pylori strains, possibly co-expressed with LPSs. The complexity of H. pylori LPSs has hampered the establishment of accurate structure-function relationships in interactions with the host, and the design of carbohydrate-based therapeutics, such as vaccines. Carbohydrate microarrays are recent powerful and sensitive tools for studying carbohydrate antigens and, since their emergence, are providing insights into the function of carbohydrates and their involvement in pathogen-host interactions. The major goals of this thesis were the structural analysis of LPSs from H. pylori strains isolated from gastric biopsies of symptomatic Portuguese patients and the construction of a novel pathogen carbohydrate microarray of these LPSs (H. pylori LPS microarray) for interaction studies with proteins. LPSs were extracted from the cell surface of five H. pylori clinical isolates and one NCTC strain (26695) by phenol/water method, fractionated by size exclusion chromatography and analysed by gas chromatography coupled to mass spectrometry. The oligosaccharides released after mild acid treatment of the LPS were analysed by electrospray mass spectrometry. In addition to the conserved core oligosaccharide moieties, structural analyses revealed the presence of type-2 Lex and Ley antigens and N-acetyllactosamine (LacNAc) sequences, typically found in H. pylori strains. Also, the presence of O-6 linked glucose residues, particularly in LPSs from strains 2191 and NCTC 26695, pointed out to the expression of a 6-glucan. Other structural domains, namely ribans, composed of O-2 linked ribofuranose residues were observed in the LPS of most of H. pylori clinical isolates. For the LPS from strain 14382, large amounts of O-3 linked galactose units, pointing to the occurrence of a galactan, a domain recently identified in the LPS of another H. pylori strain. A particular feature to the LPSs from strains 2191 and CI-117 was the detection of large amounts of O-4 linked N-acetylglucosamine (GlcNAc) residues, suggesting the presence of chitin-like glycans, which to our knowledge have not been described for H. pylori strains. For the construction of the H. pylori LPS microarray, the structurally analysed LPSs, as well as LPS-derived oligosaccharide fractions, prepared as neoglycolipid (NGL) probes were noncovalently immobilized onto nitrocellulosecoated glass slides. These were printed together with NGLs of selected sequence defined oligosaccharides, bacterial LPSs and polysaccharides. The H. pylori LPS microarray was probed for recognition with carbohydratebinding proteins (CBPs) of known specificity. These included Le and blood group-related monoclonal antibodies (mAbs), plant lectins, a carbohydratebinding module (CBM) and the mammalian immune receptors DC-SIGN and Dectin-1. The analysis of these CBPs provided new information that complemented the structural analyses and was valuable in the quality control of the constructed microarray. Microarray analysis revealed the occurrence of type-2 Lex and Ley, but not type-1 Lea or Leb antigens, supporting the results obtained in the structural analysis. Furthermore, the H. pylori LPSs were recognised by DC-SIGN, a mammalian lectin known to interact with this bacterium through fucosylated Le epitopes expressed in its LPSs. The -fucose-specific lectin UEA-I, showed restricted binding to probes containing type-2 blood group H sequence and to the LPSs from strains CI-117 and 14382. The presence of H-type-2, as well Htype- 1 in the LPSs from these strains, was confirmed using specific mAbs. Although H-type-1 determinant has been reported for H. pylori LPSs, this is the first report of the presence of H-type-2 determinant. Microarray analysis also revealed that plant lectins known to bind 4-linked GlcNAc chitin oligosaccharide sequences bound H. pylori LPSs. STL, which exhibited restricted and strong binding to 4GlcNAc tri- and pentasaccharides, differentially recognised the LPS from the strain CI-117. The chitin sequences recognised in the LPS could be internal, as no binding was detected to this LPS with WGA, known to be specific for nonreducing terminal of 4GlcNAc sequence. Analyses of the H. pylori LPSs by SDS-PAGE and Western blot with STL provided further evidence for the presence of these novel domains in the O-chain region of this LPS. H. pylori LPS microarray was also applied to analysis of two human sera. The first was from a case infected with H. pylori (H. pylori+ CI-5) and the second was from a non-infected control.The analysis revealed a higher IgG-reactivity towards H. pylori LPSs in the H. pylori+ serum, than the control serum. A specific IgG response was observed to the LPS isolated from the CI-5 strain, which caused the infection. The present thesis has contributed to extension of current knowledge on chemical structures of LPS from H. pylori clinical isolates. Furthermore, the H. pylori LPS microarray constructed enabled the study of interactions with host proteins and showed promise as a tool in serological studies of H. pyloriinfected individuals. Thus, it is anticipated that the use of these complementary approaches may contribute to a better understanding of the molecular complexity of the LPSs and their role in pathogenesis.