Aplicação de cortiça em dois tipos de reatores para tratamento de água

A qualidade da água degradou-se de forma relevante nas últimas décadas e os processos de sorção têm vindo a ser investigados como métodos promissores para o tratamento de águas contaminadas. Neste trabalho avaliou-se a capacidade de dois tipos de cortiça para a remoção de diversos contaminantes, em reatores de vaso fechado e de leito fixo. Os ensaios realizados em reatores de vaso fechado permitiram (i) avaliar o efeito do pH e da granulometria na eficiência dos sorventes na remoção de mercúrio e (ii) avaliar a afinidade dos sorventes para outros contaminantes, nomeadamente arsénio, cádmio, níquel e chumbo. Estruturalmente as duas cortiças estudadas aparentam ser semelhantes, com uma pequena diferença de comportamento ácido-base e não apresentam diferenças estatisticamente significativas na remoção de mercúrio. Os resultados obtidos permitiram constatar que o processo de remoção é independente do pH, tendo-se obtido percentagens de remoção da ordem dos 80% e de concentrações de mercúrio na cortiça na ordem dos 117 μg/g. As cortiças estudadas revelaram-se menos eficazes no tratamento de água com os restantes contaminantes, atingindo percentagens de remoção máximas de 0% para As, 11% para Cd, 35% para Ni e 69% para Pb. Os ensaios em leito fixo, mesmo sem terem sido otimizados, revelam que é possível obter uma eficácia de remoção de mercúrio superior a 90% nas primeiras 40 horas de trabalho, sendo a concentração de mercúrio no leito de 680 μg/g. Relativamente aos mecanismos de sorção, os resultados experimentais indicam que estes são possivelmente de natureza química e que as interações eletrostáticas têm pouca importância.

UV-induced stress in bacterioneuston : mechanisms and ecological implications

As bactérias desempenham um papel chave na reciclagem de energia e matéria nas teias tróficas aquáticas. No entanto, as suas pequenas dimensões, curto tempo de geração e o facto de os seus genomas constituírem uma grande porção do seu volume celular, tornam as bactérias mais suscetíveis às alterações ambientais que os organismos superiores. O aumento dos níveis de radiação UVB (280-320 nm) constitui uma ameaça particularmente importante para as comunidades bacterianas dos sistemas aquáticos, uma vez que a radiação consegue penetrar até profundidades consideráveis. No entanto, os mecanismos através dos quais a radiação causa danos nas bactérias ainda não são claros, o que impede a modelação precisa dos efeitos da radiação UV nas comunidades bacterianas naturais. O bacterioneuston habita a microcamada superficial (primeiro milímetro da coluna de água), estando naturalmente exposto a níveis de radiação UV superiores aos que o bacterioplâncton está exposto. Deste modo, a microcamada superficial pode ser vista como um nicho ecológico modelo para estudar as interações entre as bactérias e a radiação UV. Os objetivos deste trabalho foram (i) avaliar a influência do nível de exposição natural à radiação das comunidades bacterianas na sua sensibilidade à radiação UV, através da comparação das respostas fotobiológicas do bacterioneuston e bacterioplâncton; (ii) aprofundar o conhecimento acerca dos mecanismos através dos quais a radiação UV causa danos, bem como dos fatores que afetam a interação entre a radiação UV e as bactérias; e (iii) avaliar o potencial da proteína RecA, que medeia a resposta SOS das bactérias, para ser usada como marcador de danos induzidos por UV nas comunidades bacterianas. Verificou-se que o bacterioneuston é mais resistente à radiação UVB que o bacterioplâncton e recupera de modo mais eficiente dos danos induzidos por UV, particularmente em condições de escassez de nutrientes, indicando assim que o nível de exposição natural das comunidades bacterianas à radiação afeta a sua sensibilidade à radiação UV. Os resultados das análises independentes do cultivo revelaram o potencial da radiação UV para afetar a estrutura das comunidades bacterianas ao selecionar bactérias resistentes. A análise do perfil de utilização de fontes de carbono usando o sistema de Ecoplacas Biolog ® e a determinação das taxas de incorporação de leucina e timidina permitiu também verificar que a radiação UV modifica o funcionamento das comunidades bacterianas. Os resultados obtidos indicam a possibilidade do bacterioneuston conter um conjunto de estirpes resistentes a UV que, mediante as condições meteorológicas apropriadas, podem ser selecionadas aquando da exposição à radiação.

Revestimentos compatíveis para alvenarias antigas sujeitas a ação severa da água

Uma das maiores causas de degradação dos revestimentos é a presença de sais solúveis, tanto nas zonas costeiras como nas zonas continentais. Estes sais podem ter origens distintas, tais como: humidade ascensional, nevoeiro salino, inundações ou ainda estarem presentes nos próprios materiais, como é o caso da utilização de areias mal lavadas. O local onde os sais cristalizam é dependente do tipo de transporte entre a alvenaria e o revestimento, assim como da severidade da envolvente ambiental (temperatura e humidade relativa). Com esta tese pretende-se desenvolver revestimentos de substituição compatíveis, eficazes e duráveis para alvenarias antigas sujeitas à ação severa da água (humidade ascensional através das fundações com elevada concentração de NaCl); desenvolver ensaios de envelhecimento acelerado baseados em ciclos de dissolução e cristalização que permitam simular a ação severa da água; perceber a influência de revestimentos com caraterísticas extremas de permeabilidade ao vapor de água aplicados nas duas faces do mesmo suporte (argamassas de cimento e resina versus argamassas de cal), e sujeitos à ação severa da água; perceber a influência de vários fatores, tais como : rasgos verticais contínuos executados no emboço e a utilização de hidrófugo no reboco no desempenho dos vários sistemas de revestimento desenvolvidos, quando sujeitos à ação severa da água;; utilizar a remoção eletrocinética de sais, em provetes simulando a influência da alvenaria e dos revestimentos, com o objetivo de reduzir a sua concentração de NaCl, para que no futuro possa ser aplicado de forma eficaz em paredes de edifícios antigos, enquanto ação de manutenção, e desta forma aumentar a durabilidade dos revestimentos. Para atingir os objetivos descritos, foram considerados: i) o desenvolvimento de provetes que permitam considerar os sistemas de revestimento desenvolvidos nesta tese e o suporte, e que simulem uma alvenaria revestida em ambas as faces, e com os quais seja possível a simulação da ação severa da água em laboratório e, ii) o desenvolvimento ciclos de dissolução e cristalização numa parede de grandes dimensões existente em laboratório, que permitam simular a ação severa da água em condições tão reais quanto possível. O objetivo final deste estudo é o desenvolvimento de um revestimento de substituição denominado “emboço ventilado” para paredes de edifícios antigos com revestimentos degradados devido à presença de humidade ascensional e sais solúveis. Pretende-se que este sistema de revestimento, composto por duas camadas de revestimento (camada base e reboco), seja compatível, durável e eficaz, e que funcione como um sistema de acumulação no qual os sais cristalizem na camada base do sistema de revestimento (executada com rasgos verticais) e não na alvenaria ou na camada exterior.

Avaliação ecológica do efeito combinado de contaminantes ambientais

The assessment of ecological status of lotic freshwater bodies, based on stringent criteria of classification, has been defined by the Water Framework Directive (WFD), as a result of the implementation and optimization of methodologies that integrate physico-chemical, biological, and hydromorphological parameters. It is recognized that the application of this methodology is not easy, because it requires deep technical and scientific knowledge; it is time consuming in its application involving high financial costs. Thus, the main objective of this study was the development of cheaper and faster complementary methodologies that may contribute to the technical application of the classification criteria defined by the WFD, achieving the same final results of evaluation. In order to achieve this main goal, the river Mau, a small mountain river subjected to different stressors (eg, metals, pesticides), was established as the main sampling area. This thesis reviewed the historical development of various biotic indexes and its application in assessing water quality, especially highlighting the new paradigm defined by the WFD, and the corresponding actions developed for optimization and intercalibration of methodologies, evaluating the final state of water bodies. The ecological spatiotemporal characterization of the river Mau focused on the application of the WFD methodology, using at this stage only macroinvertebrates collected during four seasons. Results were compared with historical data of the last three years and they demonstrated that the river is in good condition. However, the ecological quality decreased at certain locations indicating that organisms were subjected to some type of disturbance. As the ecological quality can be conditioned by pulses of contamination from the sediments, in environmental adverse conditions, assays were performed with elutriates, obtained from sediments collected near the mining complex Braçal-Palhal. Results showed that this method was effective achieving the state of contamination, which may be important in prioritizing/scoring of critical areas within river ecosystems potentially impacted, using the WFD methodology. However, this methodology requires the collection of sediment which can promote the modification and / or loss of contaminants. To solve this potential problem, we developed a new methodology to obtain similar results. For this, we used a benthic microalga, belonging to the Portuguese flora, sensitive to organic pollution and metals. This methodology was optimized for application in situ, by immobilization of diatom in calcium alginate beads. The results showedthat their sensitivity and normal growth rate are similar to data obtained when used free cells of diatom. This new methodology allowed the achievement of a very quick response on the degree of contamination of a site, providing a complementary methodology to WFD.

Soil erosion mitigation following forest wildfires

This study aims to measure the effectiveness of four post-fire emergency techniques for reducing overland flow and soil erosion on the central-Portugal typical forest. The selection and development of these techniques was based on the review of the scientific background, but specially after checking throughout field rainfall simulation experiments which factors were the key for runoff and soil erosion on the specific case of high repellent soils. The forest residue mulch, a new treatment never tested before, was highly effective in reducing runoff and soil erosion in recently burnt eucalypt forest. The logging slash mulch had no obvious effect, but it was attributed to the small amounts of runoff and sediments that the untreated plots produced due to the extensive needle cast following a low severity fire. The hydromulch, a mixture of water, organic fibres, seeds, nutrients and a surfactant used in cutted slopes rehabilitation was also highly successful and was specially indicated for especially sensible areas. The utilization of polyacrylamides, a chemical agent with good performance in agricultural erosion, was not successful in post-fire runoff and soil erosion control, once that did not alter the most important key factor for soil erosion: the ground cover. The development of a new fibre optic turbidity sensor was a successful development on the soil erosion determination methodology, and its patent is being processed in the mean time.

Assessment of higher plant species suitability for ecological restoration following major disturbance

O presente trabalho é constituído por uma revisão bibliográfica e uma série de estudos científicos experimentais visando a melhoria do conhecimento da ecologia de germinação e resposta ao estresse hídrico em arbustos autóctones. Estes estudos pretendem contribuir para o conhecimento da ecologia de espécies autóctones na fase de germinação e estabelecimento inicial das plântulas através da comparação da resposta de sementes de diferentes proveniências. Os primeiros três capítulos focam-se no estudo dos efeitos de pré-tratamentos na germinação de espécies arbustivas com diferentes estratégias de regeneração e dormência da semente, enquanto os dois últimos capítulos incidem sobre o efeito de diferentes condições de disponibilidade de água na germinação e estabelecimento inicial de plântulas com potencial para restauro ecológico. Este estudo procura abordar aspetos importantes para o estudo e validação do uso de espécies alvo para o restauro ecológico em zonas Mediterrânicas, contribuindo deste modo para a melhoria do conhecimento da ecologia destas espécies. A germinação foi estimulada por pré-tratamentos de calor em quatro das cinco espécies cuja época de dispersão da semente na primavera-verão. As sementes provenientes do sul tenderam a germinar melhor, sendo ao mesmo tempo mais pequenas. Por outro lado, a germinação em espécies cuja dispersão da semente ocorre no outono-inverno variou de acordo com o tipo de dormência da semente. A germinação foi em geral favorecida pela estratificação a frio na espécie apresentando dormência fisiológica mas foi negativamente afetada na espécie que não apresenta dormência. Esta resposta não foi, no entanto, inequívoca pois foi dependente da proveniência estudada. O efeito da estratificação a frio teve em geral um efeito mais positivo ou menos negativo nas sementes provenientes do norte em comparação com as outras proveniências. O stress-osmótico teve um efeito negativo consistente na germinação de Pistacia lentiscus e outro fator que também afetou significativamente a germinação foi a variabilidade intra-populacional entre plantas mãe. As duas proveniências apresentaram diferentes graus de associação entre a germinação e/ou caracteres morfológicos da semente ou planta mãe. Quanto à fase de estabelecimento inicial, o baixo conteúdo em água teve um claro efeito negativo no investimento relativo em biomassa acima do solo e um efeito positivo no investimento relativo em biomassa abaixo do solo em Arbutus unedo. Esta resposta não foi inequívoca, uma vez que as proveniências diferiram em adaptações morfológicas ao baixo conteúdo em água. As plântulas da proveniência mais húmida revelaram uma taxa de crescimento relativo superior mas, ao mesmo tempo, uma fraca adaptação às condições de baixa disponibilidade de água, quando comparadas com as outras proveniências. Ao contrário, as plântulas da proveniência seca com verão mais quente apresentaram semelhantes diâmetro do colo da raiz, peso seco de folhas e performance fisiológica sob os dois regimes de irrigação. Os resultados obtidos revelam diferenças significativas na germinação e desenvolvimento inicial entre as distintas proveniências que poderão estar relacionadas com adaptações ao clima dos locais de origem. Os desenvolvimentos futuros do estudo dos mecanismos subjacentes às adaptações observadas poderiam contribuir para a melhoria das previsões de sucesso do estabelecimento inicial em diferentes populações de plantas, permitindo aumentar a confiança e efetividade de custos nas decisões relacionadas com ações de restauro ecológico em cenários de alterações climáticas.

Synthesis of new Aβ-ligands useful in diagnosis of Alzheimer's disease

Alzheimer’s disease is a chronic progressive neurodegenerative disease and is the most common form of dementia (estimated 50−60% of all cases), associated with loss of memory (in particular episodic memory), cognitive decline, and behavioural and physical disability, ultimately leading to death. Alzheimer’s disease is a complex disease, mostly occurring sporadically with no apparent inheritance and being the age the main risk factor. The production and accumulation of amyloid-beta peptide in the central nervous system is a key event in the development of Alzheimer’s disease. This project is devoted to the synthesis of amyloid-beta ligands, fluorophores and blood brain barrier-transporters for diagnosis and therapy of Alzheimer’s disease. Different amyloid-beta ligands will be synthesized and their ability to interact with amyloid-beta plaques will be studied with nuclear magnetic resonance techniques and a process of lead optimization will be performed. Many natural and synthetic compounds able to interact as amyloid-beta ligands have been identified. Among them, a set of small molecules in which aromatic moieties seem to play a key role to inhibit amyloid-beta aggregation, in particular heteroaromatic polycyclic compounds such as tetracyclines. Nevertheless tetracyclines suffer from chemical instability, low water solubility and possess, in this contest, undesired anti-bacterial activity. In order to overcome these limitations, one of our goals is to synthesize tetracyclines analogues bearing a polycyclic structure with improved chemical stability and water solubility, possibly lacking antibacterial activity but conserving the ability to interact with amyloid-beta peptides. Known tetracyclines have in common a fourth cycle without an aromatic character and with different functionalisations. We aim to synthesize derivatives in which this cycle is represented by a sugar moiety, thus bearing different derivatisable positions or create derivatives in which we will increase or decrease the number of fused rings. In order to generate a potential drug-tool candidate, these molecules should also possess the correct chemical-physical characteristics. The glycidic moiety, not being directly involved in the binding, it assures further possible derivatizations, such as conjugation to others molecular entities (nanoparticles, polymeric supports, etc.), and functionalization with chemical groups able to modulate the hydro/lipophilicity. In order to be useful such compounds should perform their action within the brain, therefore they have to be able to cross the blood brain barrier, and to be somehow detected for diagnostic purposes.

A actividade sintética de hMSCs em contacto com vidros bioativos

Os vidros bioativos constituem um material apropriado para o preenchimento de defeitos ósseos, como alternativa a enxertos autólogos, uma vez que, quando expostos a fluidos fisiológicos promovem a formação de uma ligação com o tecido ósseo sob a forma de uma camada de hidroxiapatite carbonatada. No presente trabalho caracterizaram-se vidros bioativos sem conteúdo alcalino, cuja composição incide no sistema binário de diópsido (CaMgSi2O6) e fosfato de tricálcio (3CaO·P2O5), em função da sua molhabilidade, carga superficial, perfil de degradação, carácter bioativo em fluido fisiológico simulado e do seu comportamento in vitro em contacto com células estaminais mesenquimais humanas (hMSCs). A medição do ângulo de contacto inicial de água sobre os vidros demonstrou o carácter hidrofílico dos vidros investigados. A determinação do potencial zeta mostrou que a carga superficial dos vidros é negativa, sendo mais negativa na composição Di-70. O estudo da biodegradação dos vidros, efetuado através da sua imersão em Tris-HCl, permitiu concluir que a perda de peso dos vidros foi reduzida. A caraterização in vitro em meio acelular foi efetuada através da imersão dos vidros numa solução de fluido fisiológico simulado (SBF) e verificou-se que estes possuem capacidade de formar uma camada de hidroxiapatite carbonatada à sua superfície após 7 dias, detetável por XRD, FTIR e SEM/EDS, sugerindo que este conjunto de vidros é potencialmente bioativo, e poderá estimular a proliferação e diferenciação celular. A resposta das hMSCs em cultura aos vidros bioativos foi avaliada em termos de atividade metabólica, morfologia, viabilidade, proliferação e diferenciação osteogénica e conclui-se que os biovidros Di-60 e Di-70 poderão constituir um suporte viável para a proliferação e diferenciação de hMSCs.

Photodynamic inactivation of bacteria by cationic porphyrins : their cellular targets and potential environmental applications

Photodynamic inactivation (PDI) is defined as the process of cell destruction by oxidative stress resulting from the interaction between light and a photosensitizer (PS), in the presence of molecular oxygen. PDI of bacteria has been extensively studied in recent years, proving to be a promising alternative to conventional antimicrobial agents for the treatment of superficial and localized infections. Moreover, the applicability of PDI goes far beyond the clinical field, as its potential use in water disinfection, using PS immobilized on solid supports, is currently under study. The aim of the first part of this work was to study the oxidative modifications in phospholipids, nucleic acids and proteins of Escherichia coli and Staphylococcus warneri, subjected to photodynamic treatment with cationic porphyrins. The aims of the second part of the work were to study the efficiency of PDI in aquaculture water and the influence of different physicalchemical parameters in this process, using the Gram-negative bioluminescent bacterium Vibrio fischeri, and to evaluate the possibility of recycling cationic PS immobilized on magnetic nanoparticles. To study the oxidative changes in membrane phospholipids, a lipidomic approach has been used, combining chromatographic techniques and mass spectrometry. The FOX2 assay was used to determine the concentration of lipid hydroperoxides generated after treatment. The oxidative modifications in the proteins were analyzed by one-dimensional polyacrylamide gel electrophoresis (SDS-PAGE). Changes in the intracellular nucleic acids were analyzed by agarose gel electrophoresis and the concentration of doublestranded DNA was determined by fluorimetry. The oxidative changes of bacterial PDI at the molecular level were analyzed by infrared spectroscopy. In laboratory tests, bacteria (108 CFU mL-1) were irradiated with white light (4.0 mW cm-2) after incubation with the PS (Tri-Py+-Me-PF or Tetra-Py+-Me) at concentrations of 0.5 and 5.0 μM for S. warneri and E. coli, respectively. Bacteria were irradiated with different light doses (up to 9.6 J cm-2 for S. warneri and up to 64.8 J cm-2 for E. coli) and the changes were evaluated throughout the irradiation time. In the study of phospholipids, only the porphyrin Tri-Py+-Me-PF and a light dose of 64.8 J cm-2 were tested. The efficiency of PDI in aquaculture has been evaluated in two different conditions: in buffer solution, varying temperature, pH, salinity and oxygen concentration, and in aquaculture water samples, to reproduce the conditions of PDI in situ. The kinetics of the process was determined in realtime during the experiments by measuring the bioluminescence of V. fischeri (107 CFU mL-1, corresponding to a level of bioluminescence of 105 relative light units). A concentration of 5.0 μM of Tri-Py+-Me-PF was used in the experiments with buffer solution, and 10 to 50 μM in the experiments with aquaculture water. Artificial white light (4.0 mW cm-2) and solar irradiation (40 mW cm-2) were used as light sources.

Silver nanoparticles flow in an aquatic trophic chain

Silver nanoparticles (AgNP) have been produced and applied in a variety of products ranging from personal care products to food package containers, clothing and medicine utilities. The antimicrobial function of AgNP makes it very useful to be applied for such purposes. Silver (Ag) is a non-essential metal for organisms, and it has been historically present in the environment at low concentrations. Those concentrations of silver increased in the last century due to the use of Ag in the photographic industry and lately are expected to increase due to the use of AgNPs in consumer products. The presence of AgNP in the aquatic environment may pose a risk for aquatic species, and the effects can vary from lethal to sublethal effects. Moreover, the contact of aquatic organisms with AgNP may not cause immediately the death of individuals but it can be accumulated inside the animals and consequently transferred within the food chain. Considering this, the objective of this work was to study the transfer of silver nanoparticles in comparison to silver ions, which was used as silver nitrate, within an aquatic food chain model. To achieve this goal, this study was divided into four steps: the toxicity assessment of AgNP and AgNO3 to aquatic test-species, the bioaccumulation assessment of AgNP and AgNO3 by Pseudokirchneriella subcapitata and Daphnia magna under different exposure scenarios, and finally the evaluation of the trophic transfer of Ag through an experimental design that included the goldfish Carassius auratus in a model trophic chain in which all the species were exposed to the worse-case scenario. We observed that the bioconcentration of Ag by P. subcapitata is mainly driven by ionic silver, and that algae cannot internalize these AgNPs, but it does internalizes dissolved Ag. Daphnia magna was exposed to AgNP and AgNO3 through different exposure routes: water, food and both water and food. The worse-case scenario for Daphnia Ag bioaccumulation was by the joint exposure of contaminated water and food, showing that Ag body burdens were higher for AgNPs than for AgNO3. Finally, by exposing C. auratus for 10 days through contaminated water and food (supplied as D. magna), with another 7 days of depuration phase, it was concluded that the 10 days of exposure were not enough for fish to reach a plateau on Ag internal concentration, and neither the 7 days of elimination were sufficient to cause total depuration of the accumulated Ag. Moreover, a higher concentration of Ag was found in the intestine of fish when compared with other organs, and the elimination rate constant of AgNP in the intestine was very low. Although a potential for trophic transfer of AgNP cannot be suggested based in the data acquired in this study, there is still a potential environmental risk for aquatic species.

Área de projecto de 12º ano de escolaridade: seu potencial educativo

A reforma curricular do ensino secundário em Portugal, enquadrada pelo Decreto-Lei nº. 74/2004, de 26 de Março, com as alterações introduzidas pelo Decreto-Lei nº. 24/2006, de 6 de Fevereiro, integra no desenho curricular dos cursos Científico- Humanísticos a Área de Projeto (AP). Esta área curricular não disciplinar, inscrita no plano de estudo dos referidos cursos, centra-se na realização de projectos concretos por parte dos alunos tendo em vista o desenvolvimento de uma visão integradora do saber, a promoção da sua orientação escolar e profissional e facilitar a sua aproximação ao mundo do trabalho (DGIDC, 2006, p.5). Diversos autores (Caamaño, 2005; Cachapuz et al., 2002; Pedrosa, 2001; Santos, 1999; Pérez, 1998; entre outros) apontam para a necessidade de a escola criar situações formativas que permitam aos alunos não só desenvolverem competências de pesquisa, selecção e organização de informação, mas também de estabelecerem relações entre os conhecimentos, de forma a adquirirem um saber integrado e a desenvolverem ainda competências de vivência numa sociedade que se rege por princípios de uma cidadania democrática e participativa. Sendo recente a implementação da Área de Projecto no ensino secundário, e face às actuais exigências sociais de criatividade e de inovação e à necessidade de intervir no futuro e de o conter dentro de limites previsíveis, partimos para este estudo com a seguinte questão: Qual o contributo da área curricular não disciplinar Área de Projecto do 12º ano - cursos de Ciências e Tecnologias - para o desenvolvimento de competências requeridas a um cidadão do século XXI? Perante esta questão, definimos como objectivos para a presente investigação: (a) estudar as potencialidades educativas da AP (12º ano) como contributo para o desenvolvimento de competências de cidadania; (b) estudar as potencialidades educativas da AP (12º ano) para a educação em e pelas ciências e (c) contribuir para o desenvolvimento do conhecimento didáctico sobre a relevância da AP no ensino secundário. Face aos objectivos definidos, delineámos uma metodologia de investigação qualitativa com características de estudo de caso, fazendo recurso de diversos instrumentos de recolha de dados (entrevista, questionário, observação directa, análise documental), e da análise de conteúdo como técnica principal de análise de dados. Os participantes privilegiados do estudo foram, para além da investigadora, alunos de uma turma do 12º ano e a respectiva professora de Área de Projecto. O estudo de caso consistiu no acompanhamento da concepção e do desenvolvimento da AP, numa turma de 12 alunos do 12º ano de escolaridade da cidade da Horta (Açores/Portugal), bem como na avaliação do seu impacto nos alunos da referida turma. Os resultados da investigação apontam, no caso concreto em estudo, para um elevado potencial educativo desta área curricular (traduzido por exemplo, ao nível de competências processuais e atitudinais), mas também para uma natureza excessivamente formal no desenvolvimento curricular de AP, incluindo a avaliação das aprendizagens dos alunos. Os resultados sugerem ainda a necessidade de se desenvolver uma didáctica especifica desta área curricular, que valorize as características de cada aluno e as especificidades do seu contexto, bem como as metodologias de trabalho a serem utilizadas, por forma a evitar que esta área curricular se transforme em mais uma disciplina do plano de estudos dos alunos. Vários caminhos de investigação futura emergem do estudo realizado. A título exemplificativo refira-se a necessidade de estudar como a formação de professores pode contribuir para o desenvolvimento profissional dos mesmos no âmbito da leccionação de AP e de outras similares.

Organic contaminants in urban soils: major inputs and potential risks

Urban soil quality may be severely affected by hydrophobic organic contaminants (HOCs), impairing environmental quality and human health. A comprehensive study was conducted in two contrasting Portuguese urban areas (Lisbon and Viseu) in order to assess the levels and potential risks of these contaminants, to identify sources and study their behaviour in soils. The concentrations of HOCs were related to the size of the city, with much higher contamination levels observed in Lisbon urban area. Source apportionment was performed by studying the HOCs profiles, their relationship with potentially toxic elements and general characteristics of soil using multivariate statistical methods. Lisbon seems to be affected by nearby sources (traffic, industry and incineration processes) whereas in Viseu the atmospheric transport may be playing an important role. In a first tier of risk assessment (RA) it was possible to identify polycyclic aromatic hydrocarbons (PAHs) in Lisbon soils as a potential hazard. The levels of PAHs in street dusts were further studied and allowed to clarify that traffic, tire and pavement debris can be an important source of PAHs to urban soils. Street dusts were also identified as being a potential concern regarding human and environmental health, especially if reaching the nearby aquatic bodies. Geostatistical tools were also used and their usefulness in a RA analysis and urban planning was discussed. In order to obtain a more realistic assessment of risks of HOCs to environment and human health it is important to evaluate their available fraction, which is also the most accessible for organisms. Therefore, a review of the processes involved on the availability of PAHs was performed and the outputs produced by the different chemical methods were evaluated. The suitability of chemical methods to predict bioavailability of PAHs in dissimilar naturally contaminated soils has not been demonstrated, being especially difficult for high molecular weight compounds. No clear relationship between chemical and biological availability was found in this work. Yet, in spite of the very high total concentrations found in some Lisbon soils, both the water soluble fraction and the body residues resulting from bioaccumulation assays were generally very low, which may be due to aging phenomena. It was observed that the percentage of soluble fraction of PAHs in soils was found to be different among compounds and mostly regulated by soil properties. Regarding bioaccumulation assays, although no significant relationship was found between soil properties and bioavailability, it was verified that biota-to-soil bioaccumulation factors were sample dependent rather than compound dependent. In conclusion, once the compounds of potential concern are targeted, then performing a chemical screening as a first tier can be a simple and effective approach to start a RA. However, reliable data is still required to improve the existing models for risk characterization.

Understanding and modelling hydrological and soil erosion processes in burnt forest catchments

Forest fires implications in overland flow and soil erosion have been researched for several years. Therefore, is widely known that fires enhance hydrological and geomorphological activity worldwide as also in Mediterranean areas. Soil burn severity has been widely used to describe the impacts of fire on soils, and has being recognized as a decisive factor controlling post-fire erosion rates. However, there is no unique definition of the term and the relationship between soil burn severity and post-fire hydrological and erosion response has not yet been fully established. Few studies have assessed post-fire erosion over multiple years, and the authors are aware of none which assess runoff. Small amount of studies concerning pre-fire management practices were also found. In the case of soil erosion models, the Revised Universal Soil Loss Equation (RUSLE) and the revised Morgan–Morgan–Finney (MMF) are well-known models, but not much information is available as regards their suitability in predicting post-fire soil erosion in forest soils. The lack of information is even more pronounced as regards post-fire rehabilitation treatments. The aim of the thesis was to perform an extensive research under the post fire hydrologic and erosive response subject. By understanding the effect of burn severity in ecosystems and its implications regarding post fire hydrological and erosive responses worldwide. Test the effect of different pre-fire land management practices (unplowed, downslope plowed and contour plowed) and time-since-fire, in the post fire hydrological and erosive response, between the two most common land uses in Portugal (pine and eucalypt). Assess the performance of two widely-known erosion models (RUSLE and Revised MMF), to predict soil erosion rates during first year following two wildfires of distinctive burn severity. Furthermore, to apply these two models considering different post-fire rehabilitation treatments in an area severely affected by fire. Improve model estimations of post-fire runoff and erosion rates in two different land uses (pine and eucalypt) using the revised MMF. To assess these improvements by comparing estimations and measurements of runoff and erosion, in two recently burned sites, as also with their post fire rehabilitation treatments. Model modifications involved: (1) focusing on intra-annual changes in parameters to incorporate seasonal differences in runoff and erosion; and (2) inclusion of soil water repellency in runoff predictions. Additionally, validate these improvements with the application of the model to other pine and eucalypt sites in Central Portugal. The review and meta-analysis showed that fire occurrence had a significant effect on the hydrological and erosive response. However, this effect was only significantly higher with increasing soil burn severity for inter-rill erosion, and not for runoff. This study furthermore highlighted the incoherencies between existing burn severity classifications, and proposed an unambiguous classification. In the case of the erosion plots with natural rainfall, land use factor affected annual runoff while land management affected both annual runoff and erosion amounts significantly. Time-since-fire had an important effect in erosion amounts among unplowed sites, while for eucalypt sites time affected both annual runoff and erosion amounts. At all studied sites runoff coefficients increase over the four years of monitoring. In the other hand, sediment concentration in the runoff, recorded a decrease during the same period. Reasons for divergence from the classic post-fire recovery model were also explored. Short fire recurrence intervals and forest management practices are viewed as the main reasons for the observed severe and continuing soil degradation. The revised MMF model presented reasonable accuracy in the predictions while the RUSLE clearly overestimated the observed erosion rates. After improvements: the revised model was able to predict first-year post-fire plot-scale runoff and erosion rates for both forest types, these predictions were improved both by the seasonal changes in the model parameters; and by considering the effect of soil water repellency on the runoff, individual seasonal predictions were considered accurate, and the inclusion of the soil water repellency in the model also improved the model at this base. The revised MMF model proved capable of providing a simple set of criteria for management decisions about runoff and erosion mitigation measures in burned areas. The erosion predictions at the validation sites attested both to the robustness of the model and of the calibration parameters, suggesting a potential wider application.

A computational study of ionic liquids used in the production of fuels and biofuels

For the past decades it has been a worldwide concern to reduce the emission of harmful gases released during the combustion of fossil fuels. This goal has been addressed through the reduction of sulfur-containing compounds, and the replacement of fossil fuels by biofuels, such as bioethanol, produced in large scale from biomass. For this purpose, a new class of solvents, the Ionic Liquids (ILs), has been applied, aiming at developing new processes and replacing common organic solvents in the current processes. ILs can be composed by a large number of different combinations of cations and anions, which confer unique but desired properties to ILs. The ability of fine-tuning the properties of ILs to meet the requirements of a specific application range by mixing different cations and anions arises as the most relevant aspect for rendering ILs so attractive to researchers. Nonetheless, due to the huge number of possible combinations between the ions it is required the use of cheap predictive approaches for anticipating how they will act in a given situation. Molecular dynamics (MD) simulation is a statistical mechanics computational approach, based on Newton’s equations of motion, which can be used to study macroscopic systems at the atomic level, through the prediction of their properties, and other structural information. In the case of ILs, MD simulations have been extensively applied. The slow dynamics associated to ILs constitutes a challenge for their correct description that requires improvements and developments of existent force fields, as well as larger computational efforts (longer times of simulation). The present document reports studies based on MD simulations devoted to disclose the mechanisms of interaction established by ILs in systems representative of fuel and biofuels streams, and at biomass pre-treatment process. Hence, MD simulations were used to evaluate different systems composed of ILs and thiophene, benzene, water, ethanol and also glucose molecules. For the latter molecules, it was carried out a study aiming to ascertain the performance of a recently proposed force field (GROMOS 56ACARBO) to reproduce the dynamic behavior of such molecules in aqueous solution. The results here reported reveal that the interactions established by ILs are dependent on the individual characteristics of each IL. Generally, the polar character of ILs is deterministic in their propensity to interact with the other molecules. Although it is unquestionable the advantage of using MD simulations, it is necessary to recognize the need for improvements and developments of force fields, not only for a successful description of ILs, but also for other relevant compounds such as the carbohydrates.

Assessing the effectiveness of chemical treatment with nanomaterials in improving the quality of different industrial effluents

Industrial activities are the major sources of pollution in all environments. Depending on the type of industry, various levels of organic and inorganic pollutants are being continuously discharged into the environment. Although, several kinds of physical, chemical, biological or the combination of methods have been proposed and applied to minimize the impact of industrial effluents, few have proved to be totally effective in terms of removal rates of several contaminants, toxicity reduction or amelioration of physical and chemical properties. Hence, it is imperative to develop new and innovative methodologies for industrial wastewater treatment. In this context nanotechnology arises announcing the offer of new possibilities for the treatment of wastewaters mainly based on the enhanced physical and chemical proprieties of nanomaterials (NMs), which can remarkably increase their adsorption and oxidation potential. Although applications of NMs may bring benefits, their widespread use will also contribute for their introduction into the environment and concerns have been raised about the intentional use of these materials. Further, the same properties that make NMs so appealing can also be responsible for producing ecotoxicological effects. In a first stage, with the objective of selecting NMs for the treatment of organic and inorganic effluents we first assessed the potential toxicity of nanoparticles of nickel oxide (NiO) with two different sizes (100 and 10-20 nm), titanium dioxide (TiO2, < 25 nm) and iron oxide (Fe2O3, ≈ 85x425 nm). The ecotoxicological assessment was performed with a battery of assays using aquatic organisms from different trophic levels. Since TiO2 and Fe2O3 were the NMs that presented lower risks to the aquatic systems, they were selected for the second stage of this work. Thus, the two NMs pre-selected were tested for the treatment of olive mill wastewater (OMW). They were used as catalyst in photodegradation systems (TiO2/UV, Fe2O3/UV, TiO2/H2O2/UV and Fe2O3/H2O2/UV). The treatments with TiO2 or Fe2O3 combined with H2O2 were the most efficient in ameliorating some chemical properties of the effluent. Regarding the toxicity to V. fischeri the highest reduction was recorded for the H2O2/UV system, without NMs. Afterwards a sequential treatment using photocatalytic oxidation with NMs and degradation with white-rot fungi was applied to OMW. This new approach increased the reduction of chemical oxygen demand, phenolic content and ecotoxicity to V. fischeri. However, no reduction in color and aromatic compounds was achieved after 21 days of biological treatment. The photodegradation systems were also applied to treat the kraft pulp mill and mining effluents. For the organic effluent the combination NMs and H2O2 had the best performances in reduction the chemical parameters as well in terms of toxicity reduction. However, for the mine effluent the best (TiO2/UV and Fe2O3/UV) were only able to significantly remove three metals (Zn, Al and Cd). Nonetheless the treatments were able of reducing the toxicity of the effluent. As a final stage, the toxicity of solid wastes formed during wastewater treatment with NMs was assessed with Chironomus riparius larvae, a representative species of the sediment compartment. Certain solid wastes showed the potential to negatively affect C. riparius survival and growth, depending on the type of effluent treated. This work also brings new insights to the use of NMs for the treatment of industrial wastewaters. Although some potential applications have been announced, many evaluations have to be performed before the upscaling of the chemical treatments with NMs.