Diopside-fluorapatite-wollastonite based bioactive glasses and glass-ceramics

Bioactive glasses and glass–ceramics are a class of biomaterials which elicit special response on their surface when in contact with biological fluids, leading to strong bonding to living tissue. This particular trait along with good sintering ability and high mechanical strength make them ideal materials for scaffold fabrication. The work presented in this thesis is directed towards understanding the composition-structure-property relationships in potentially bioactive glasses designed in CaOMgOP2O5SiO2F system, in some cases with added Na2O. The main emphasis has been on unearthing the influence of glass composition on molecular structure, sintering ability and bioactivity of phosphosilicate glasses. The parent glass compositions have been designed in the primary crystallization field of the pseudo-ternary system of diopside (CaO•MgO•2SiO2) – fluorapatite (9CaO•3P2O5•CaF2) – wollastonite (CaO•SiO2), followed by studying the impact of compositional variations on the structure-property relationships and sintering ability of these glasses. All the glasses investigated in this work have been synthesized via melt-quenching route and have been characterized for their molecular structure, sintering ability, chemical degradation and bioactivity using wide array of experimental tools and techniques. It has been shown that in all investigated glass compositions the silicate network was mainly dominated by Q2 units while phosphate in all the glasses was found to be coordinated in orthophosphate environment. The glass compositions designed in alkali-free region of diopside – fluorapatite system demonstrated excellent sintering ability and good bioactivity in order to qualify them as potential materials for scaffold fabrication while alkali-rich bioactive glasses not only hinder the densification during sintering but also induce cytotoxicity in vitro, thus, are not ideal candidates for in vitro tissue engineering. One of our bioglass compositions with low sodium content has been tested successfully both in vivo and in preliminary clinical trials. But this work needs to be continued and deepened. The dispersing of fine glass particles in aqueous media or in other suitable solvents, and the study of the most important factors that affect the rheology of the suspensions are essential steps to enable the manufacture of porous structures with tailor-made hierarchical pores by advanced processing techniques such as Robocasting.

Alkaline-earth aluminosilicate-based glass and glass-ceramic sealants for functional applications

The planar design of solid oxide fuel cell (SOFC) is the most promising one due to its easier fabrication, improved performance and relatively high power density. In planar SOFCs and other solid-electrolyte devices, gas-tight seals must be formed along the edges of each cell and between the stack and gas manifolds. Glass and glass-ceramic (GC), in particular alkaline-earth alumino silicate based glasses and GCs, are becoming the most promising materials for gas-tight sealing applications in SOFCs. Besides the development of new glass-based materials, new additional concepts are required to overcome the challenges being faced by the currently existing sealant technology. The present work deals with the development of glasses- and GCs-based materials to be used as a sealants for SOFCs and other electrochemical functional applications. In this pursuit, various glasses and GCs in the field of diopside crystalline materials have been synthesized and characterized by a wide array of techniques. All the glasses were prepared by melt-quenching technique while GCs were produced by sintering of glass powder compacts at the temperature ranges from 800−900 ºC for 1−1000 h. Furthermore, the influence of various ionic substitutions, especially SrO for CaO, and Ln2O3 (Ln=La, Nd, Gd, and Yb), for MgO + SiO2 in Al-containing diopside on the structure, sintering and crystallization behaviour of glasses and properties of resultant GCs has been investigated, in relevance with final application as sealants in SOFC. From the results obtained in the study of diopside-based glasses, a bilayered concept of GC sealant is proposed to overcome the challenges being faced by (SOFCs). The systems designated as Gd−0.3 (in mol%: 20.62MgO−18.05CaO−7.74SrO−46.40SiO2−1.29Al2O3 − 2.04 B2O3−3.87Gd2O3) and Sr−0.3 (in mol%: 24.54 MgO−14.73 CaO−7.36 SrO−0.55 BaO−47.73 SiO2−1.23 Al2O3−1.23 La2O3−1.79 B2O3−0.84 NiO) have been utilized to realize the bi-layer concept. Both GCs exhibit similar thermal properties, while differing in their amorphous fractions, revealed excellent thermal stability along a period of 1,000 h. They also bonded well to the metallic interconnect (Crofer22APU) and 8 mol% yttrium stabilized zirconium (8YSZ) ceramic electrolyte without forming undesirable interfacial layers at the joints of SOFC components and GC. Two separated layers composed of glasses (Gd−0.3 and Sr−0.3) were prepared and deposited onto interconnect materials using a tape casting approach. The bi-layered GC showed good wetting and bonding ability to Crofer22APU plate, suitable thermal expansion coefficient (9.7–11.1 × 10–6 K−1), mechanical reliability, high electrical resistivity, and strong adhesion to the SOFC componets. All these features confirm the good suitability of the investigated bi-layered sealant system for SOFC applications.

Granitos Variscos do Centro Norte de Portugal

A Cadeia Varisca Europeia, formada no final do Paleozóico, estende-se desde a Europa de Leste até à Península Ibérica e inclui extensas áreas ocupadas por rochas graníticas, representando, por isso, uma das regiões do globo em que mais se têm investigado os processos de reciclagem e acreção crustal em contexto de colisão continental. O Maciço Ibérico constitui o segmento mais ocidental do orógeno varisco europeu e uma das áreas onde a actividade plutónica está mais bem expressa e mostra uma maior diversidade tipológica. No Maciço Ibérico, em particular na Zona Centro Ibérica (ZCI), a intrusão de rochas granitóides de idade varisca está preferencialmente associada com a terceira fase de deformação (D3). De acordo com as suas relações com este evento de deformação, os granitóides da ZCI foram subdivididos em dois grandes grupos: sin-D3 e tardi-pós-D3. Em termos petrográficos e geoquímicos, os maciços graníticos sin- e tardi-pós-D3 têm sido integrados em duas séries principais: (a) a série dos granitos de duas micas e dos leucogranitos fortemente peraluminosos e (b) a série dos monzogranitos e granodioritos, metaluminosos a fracamente peraluminosos, com biotite ± anfíbola. Os granitos da primeira série apresentam uma filiação de tipo S e resultam da anatexia de materiais supracrustais durante o clímax de metamorfismo regional, enquanto.os granitóides da segunda série exibem características transicionais I-S e têm sido interpretados, quer como produtos da hibridização de magmas félsicos crustais com magmas básicos de proveniência mantélica, quer como resultantes da anatexia de protólitos metaígneos da crosta inferior. O trabalho realizado no batólito das Beiras revela que o clímax de metamorfismo regional foi atingido neste sector durante um evento extensional (D2), que foi acompanhado por intensa migmatização. No ínício da D3, o volume de fundidos crustais já seria suficientemente grande (ca. 15-35%) para que pudesse ocorrer a sua separação do resíduo sólido. Assim, durante a tectónica transcorrente D3, dá-se a ascenção, diferenciação e consolidação de abundantes quantidades de magmas graníticos, fortemente peraluminosos e isotopicamente evoluídos (tipo-S), que vêm a originar enormes batólitos de leucogranitos de duas micas, com idades entre 317-312 Ma. No final da D3, com a progressiva substituição do manto litosférico pela astenosfera, mais quente, diminui a densidade da coluna litosférica e ocorre o levantamento isostático e exumação da crusta. A fusão por descompressão da astenosfera gera líquidos básicos que hibridizam com os fundidos félsicos crustais, em proporções variáveis, e produzem magmas metaluminosos a ligeiramente peraluminosos, de afinidade calco-alcalina. A ascenção destes magmas terá tido lugar nos últimos estádios da deformação transcorrente e a sua instalação no nível crustal final ocorre após a D3, dando origem aos inúmeros maciços compósitos de granitóides biotíticos híbridos tardi-pós-cinemáticos, presentes no batólito das Beiras. Os dados de campo mostram que estes granitóides são intrusivos nos plutões sin-D3, cortam as estruturas regionais e provocam metamorfismo de contacto nas sequências do Carbónico Superior. Com base nas idades U-Pb obtidas em zircões e monazites, é possível datar este importante período de plutonismo granítico com 306-294 Ma. A assinatura geoquímica e isotópica dos granitóides híbridos tardi-pós-D3 revela que, para além da mistura de componentes com proveniência distinta (manto empobrecido e crusta continental), a sua evolução foi, em grande parte, controlada por processos de cristalização fraccionada (modelo AFC).

Preparação e caracterização de fibras e nanotubos de BiFeO3 e FeNbO4

Esta dissertação teve como objetivo a produção e caracterização física de fibras e nanotubos de BiFeO3 e FeNbO4. Para o desenvolvimento destes materiais utilizou-se a técnica de fusão com laser (LFZ), o método sol-gel (Pechini) e o método de poros absorventes. As amostras obtidas foram sujeitas a uma caracterização estrutural por difração de raios-X e espetroscopia de Raman, morfológica por microscopia electrónica de varrimento e elétrica por medidas de constante dielétrica. Os resultados obtidos com a técnica de difração de raios-X mostraram que o gel com tratamento a 750 ºC é polifásico. Para conseguir produzir nanotubos escolheu-se o LaCoO3 como material alternativo. Usando a técnica de fusão de zona com laser (LFZ) obtiveram-se fibras de BiFeO3, FeNbO4 e compósitos de BiFeO3+FeNbO4. Com esta técnica foram crescidas fibras a várias velocidades (5, 10, 25, 50, 100 e 200 mm/h), tendo os resultados obtidos com a difração de raios-X evidenciado que todas as amostras obtidas são polifásicas, sendo a amostra de 10 mm/h para o BiFeO3 e a de 5 mm/h para o FeNbO4 as que apresentam melhores propriedades. As amostras de 5 mm/h de todos os compósitos são aquelas que possuem menor quantidade de segundas fases e portanto foram alvo de estudo mais aprofundado. A caracterização dielétrica permitiu verificar que todas as amostras apresentam fenómenos de relaxação dielétrica. Verifica-se também que para o BiFeO3 a constante dielétrica é superior na amostra crescida à velocidade de 10 mm/h, para o FeNbO4 é superior na amostra crescida a 5 mm/h e nos compósitos a amostra com 75% de BiFeO3 e 25% de FeNbO4 apresenta um comportamento diferente das restantes, eventualmente devido à sua microestrutura singular.

Impacto das fusões e aquisições no desempenho de empresas portuguesas

As fusões e aquisições (F&A) são operações estratégicas usadaspor empresas para fortalecer e manter a sua posição no mercado. Estas são vistas por muitos como uma forma relativamente rápida, flexível e eficiente de expandir para novos mercados, incorporar novas tecnologias e inovar. Sem essas qualidades, as empresas acreditam que é praticamente impossível ser competitivo na economia global de hoje. No entanto, o seu sucesso não é de forma alguma garantido. Perante esta incerteza de que tudo corra de forma vantajosa, o presente trabalho pretende avaliar através do estudo do impacto do processo de fusão ou aquisição o desempenho das empresas portuguesas. Procedemos a duas metodologias para chegar a uma conclusão sobre este estudo. Primeiramente foi feito o cálculo e análise de indicadores económico-financeiros antes e depois da realização da F&A e em segundo, uma análise do efeito de notícias boas e más referentes ao anúncio da mesma através da metodologia das janelas de eventos para cinco casos de F&A ocorridos em Portugal, sendo assim o método de análise baseado em casos de estudo. Foi possível verificar, regra geral, um desempenho superior das empresas adquirentes após o processo de F&A. Concluiu-se que os mercados reagem de forma distinta às boas e às más notícias e que o investidor é alvo de alterações de comportamento em termos de sentimento antes e após o anúncio. Deste modo a análise é sensível à distinção por tipos de notícias, sendo necessária a sua correta classificação. Por último, os resultados parecem indiciar que as reações do mercado acionista aos processos de F&A estão dependentes da situação económico-financeira corrente, resultado que merecerá futuramente uma análise posterior mais cuidada e profunda.

Geoquímica dos eclogitos do Maciço de Bragança: origem dos "veios dioríticos" e implicações geocronológicas

A análise dos perfis de elementos incompatíveis imóveis em eclogitos do Maciço de Bragança permitiu dividir estas rochas em três grupos (A, B e C). As rochas dos grupos B e C correspondem a eclogitos granulitizados que, frequentemente, contêm veios "dioríticos". Os dados geoquímicos disponíveis revelam que os materiais dos veios e os eclogitos hospedeiros têm concentrações muito semelhantes de elementos incompatíveis "imóveis", enquanto há diferenças significativas no que se refere a elementos móveis. Assim, é improvável que os veios possam representar magmas dioríticos gerados por fusão parcial dos eclogitos hospedeiros. Os veios "dioríticos" são interpretados neste trabalho como produtos de actividade metassomática que afectou os eclogitos; o metassomatismo terá sido induzido por fluidos que terão emanado dos gnaisses encaixantes duranto o metamorfismo prógrado da descompressão. Este episódio metasomático terá causado reajustamentos isotópicos, o que explicaria as contradições aparentes entre os dados geocronológicos obtidos nos eclogitos.

Electrolytes for ceramic oxide fuel cells

The main objective of this dissertation is the development and processing of novel ionic conducting ceramic materials for use as electrolytes in proton or oxide-ion conducting solid oxide fuel cells. The research aims to develop new processing routes and/or materials offering superior electrochemical behavior, based on nanometric ceramic oxide powders prepared by mechanochemical processes. Protonic ceramic fuel cells (PCFCs) require electrolyte materials with high proton conductivity at intermediate temperatures, 500-700ºC, such as reported for perovskite zirconate oxides containing alkaline earth metal cations. In the current work, BaZrO3 containing 15 mol% of Y (BZY) was chosen as the base material for further study. Despite offering high bulk proton conductivity the widespread application of this material is limited by its poor sinterability and grain growth. Thus, minor additions of oxides of zinc, phosphorous and boron were studied as possible sintering additives. The introduction of ZnO can produce substantially enhanced densification, compared to the un-doped material, lowering the sintering temperature from 1600ºC to 1300ºC. Thus, the current work discusses the best solid solution mechanism to accommodate this sintering additive. Maximum proton conductivity was shown to be obtained in materials where the Zn additive is intentionally adopted into the base perovskite composition. P2O5 additions were shown to be less effective as a sintering additive. The presence of P2O5 was shown to impair grain growth, despite improving densification of BZY for intermediate concentrations in the range 4 – 8 mol%. Interreaction of BZY with P was also shown to have a highly detrimental effect on its electrical transport properties, decreasing both bulk and grain boundary conductivities. The densification behavior of H3BO3 added BaZrO3 (BZO) shows boron to be a very effective sintering aid. Nonetheless, in the yttrium containing analogue, BaZr0.85Y0.15O3- (BZY) the densification behavior with boron additives was shown to be less successful, yielding impaired levels of densification compared to the plain BZY. This phenomenon was shown to be related to the undesirable formation of barium borate compositions of high melting temperatures. In the last section of the work, the emerging oxide-ion conducting materials, (Ba,Sr)GeO3 doped with K, were studied. Work assessed if these materials could be formed by mechanochemical process and the role of the ionic radius of the alkaline earth metal cation on the crystallographic structure, compositional homogeneity and ionic transport. An abrupt jump in oxide-ion conductivity was shown on increasing operation temperature in both the Sr and Ba analogues.

Development of Zirconia based phosphors for application in lighting and as luminescent bioprobes

The strong progress evidenced in photonic and optoelectronic areas, accompanied by an exponential development in the nanoscience and nanotechnology, gave rise to an increasing demand for efficient luminescent materials with more and more exigent characteristics. In this field, wide band gap hosts doped with lanthanide ions represent a class of luminescent materials with a strong technological importance. Within wide band gap material, zirconia owns a combination of physical and chemical properties that potentiate it as an excellent host for the aforementioned ions, envisaging its use in different areas, including in lighting and optical sensors applications, such as pressure sensors and biosensors. Following the demand for outstanding luminescent materials, there is also a request for fast, economic and an easy scale-up process for their production. Regarding these demands, laser floating zone, solution combustion synthesis and pulsed laser ablation in liquid techniques are explored in this thesis for the production of single crystals, nanopowders and nanoparticles of lanthanides doped zirconia based hosts. Simultaneously, a detailed study of the morphological, structural and optical properties of the produced materials is made. The luminescent characteristics of zirconia and yttria stabilized zirconia (YSZ) doped with different lanthanide ions (Ce3+ (4f1), Pr3+ (4f2), Sm3+ (4f5), Eu3+ (4f6), Tb3+ (4f8), Dy3+ (4f9), Er3+ (4f11), Tm3+ (4f12), Yb3+ (4f13)) and co-doped with Er3+,Yb3+ and Tm3+,Yb3+ are analysed. Besides the Stokes luminescence, the anti- Stokes emission upon infrared excitation (upconversion and black body radiation) is also analysed and discussed. The comparison of the luminescence characteristics in materials with different dimensions allowed to analyse the effect of size in the luminescent properties of the dopant lanthanide ions. The potentialities of application of the produced luminescent materials in solid state light, biosensors and pressure sensors are explored taking into account their studied characteristics.

Impact of natural and/or chemical stressors on the freeze-tolerant and euryhaline enchytraeid, Enchytraeus albidus

Rapid climatic changes are taking place in Arctic, subarctic and cold temperate regions, where predictions point to an increase in freeze-thaw events, changes in precipitation, evaporation and salinity patterns. Climate change may therefore result in large impacts in ecosystem functioning and dynamics, especially in the presence of contaminants due to intense anthropogenic activities. Even though multiple stress approaches have received increasing interest in the last decades, the number of such studies is limited. In particular, knowledge on the effect of freezethaw events and salinity fluctuations on ecotoxicology of soil invertebrates is lacking, especially important when considering supralittoral species. Therefore, the aim of this thesis was to investigate the effects of low temperature and salinity fluctuations, singly and in combination with contaminants, in the freeze-tolerant and euryhaline enchytraeid Enchytraeus albidus. The assessment of population level endpoints (survival and reproduction), along with physiological and biochemical parameters such as levels of cryoprotectants, ice/water content, oxidative stress biomarkers, cellular energy allocation, and tissue concentration of chemicals (when applied), provided new and valuable knowledge on the effects of selected physical and chemical stressors in E. albidus, and allowed the understanding of adjustments in the primary response mechanisms that enable worms to maintain homeostasis and survival in harsh environments such as polar and temperate-cold regions. The presence of moderate levels of salinity significantly increased freeze-tolerance (mainly evaluated as survival, cryoprotection and ice fraction) and reproduction of E. albidus. Moreover, it contributed to the readjustments of cryoprotectant levels, restoration of antioxidant levels and changed singnificantly the effect and uptake of chemicals (copper cadmium, carbendazim and 4-nonylphenol). Temperature fluctuations (simulated as daily freeze-thaw cycles, between -2ºC and -4ºC) caused substancial negative effect on survival of worms previsouly exposed to non-lethal concentrations of 4-nonylphenol, as compared with constant freezing (-4ºC) and control temperature (2ºC). The decrease in cryoprotectants, increase in energy consumption and the highest concentration of 4-nonylphenol in the tissues have highlighted the high energy requirements and level of toxicity experienced by worms exposed to the combined effect of contaminants and freezing-thawing events. The findings reported on this thesis demonstrate that natural (physical) and chemical stressors, singly or in combination, may alter the dynamics of E. albidus, affecting not only their survival and reproduction (and consequent presence/distribution) but also their physiological and biochemical adaptations. These alterations may lead to severe consequences for the functioning of the ecosystems along the Arctic, subarctic and cold temperate regions, where they play an important role for decomposition of dead organic matter. This thesis provides a scientific basis for improving the setting of safety factors for natural soil ecosystems, and to underline the integration of similar investigations in ecotoxicology, and eventually in risk assessment of contaminants.

Production of bioplastics from hydrolysates of paper industry by Haloferax mediterranei

The biorefinery concept has attracted much attention over the last decade due to increasing concerns about the use of fossil resources. In this context emerged the use of bioplastics, namely polyhydroxyalkanoates (PHA). PHA are biocompatible and biodegradable plastics that can be obtained from renewable raw materials and can constitute an alternative solution to conventional plastics. In this work, hydrolysed cellulose pulp, coming from Eucalyptus globulus wood cooking, was used as substrate to the PHA-storing bacteria Haloferax mediterranei. The hydrolysed pulp is rich in simple sugars, mainly glucose (81.96 g.L-1) and xylose (20.90 g.L-1). Tests were made in defined medium with glucose and xylose and in hydrolysate supplemented with salts and yeast extract. Different concentrations of glucose were tested, namely 10, 15, 20, 30 and 40 g.L-1. The best accumulation results (27.1 % of PHA) were obtained in hydrolysate medium with 10 g.L-1. Using this concentration, assays were performed in fed-batch and sequencing batch reactor conditions in order to determine the best feeding strategy. The strategy that led to the best results was fed-batch assay with 24.7 % of PHA. An assay without sterile conditions was performed, in which was obtained the same growth than in sterilization test. Finally it was performed an assay in a bioreactor and a fast growth (0.14 h-1) with high glucose and xylose consumption rates (0.368 g.L-1.h-1 and 0.0947 g.L-1.h-1, respectively) were obtained. However 1.50 g.L-1 of PHA, corresponding to 16.1 % (92.52 % of 3HB and 3HV of 7.48 %) of % PHA were observed. The polymer was further characterized by DSC with a glass transition temperature of -6.07 °C, a melting temperature of 156.3 °C and a melting enthalpy of 63.07 J.g-1, values that are in accordance with the literature. This work recognizes for the first time the suitability of the pulp paper hydrolysate as a substrate for PHA production by H. mediterranei.

CD81 interacting proteins

Fertilization is a multistep and complex process culminating in the merge of gamete membranes, cytoplasmic unity and fusion of genome. CD81 is a tetraspanin protein that participates in sperm-oocyte interaction, being present at the oocyte surface. CD81 has also been implicated in other biological processes, however its specific function and molecular mechanisms of action remain to be elucidated. The interaction between CD81 and its binding partner proteins may underlie the CD81 involvement in a variety of cellular processes and modulate CD81/interactors specific functions. Interestingly, in a Yeast two Hybrid system previously performed in our lab, CD81 has emerged as a putative interactor of the Amyloid Precursor Protein (APP). In the work here described, bioinformatics analyses of CD81 interacting proteins were performed and the retrieved information used to construct a protein-protein interaction network, as well as to perform Gene Ontology enrichment analyses. CD81 expression was further evaluated in CHO, GC-1 and SH-SY5Y cell lines, and in human sperm cells. Additionally, its subcellular localization was analyzed in sperm cells and in the neuronal-like SH-SY5Y cell line. Subsequently, coimmunoprecipitation assays were performed in CHO and SH-SY5Y cells to attempt to prove the physical interaction between CD81 and APP. A functional interaction between these two proteins was accessed thought the analyses of the effects of CD81 overexpression on APP levels. A co-localization analysis of CD81 and some interactors proteins retrieved from the bioinformatics analyses, such as APP, AKT1 and cytoskeleton-related proteins, was also performed in sperm cells and in SH-SY5Y cells. The effects of CD81 in cytoskeleton remodeling was evaluated in SH-SY5Y cells through monitoring the effects of CD81 overexpression in actin and tubulin levels, and analyzing the colocalization between overexpressed CD81 and F-actin. Our results showed that CD81 is expressed in all cell lines tested, and also provided the first evidence of the presence of CD81 in human sperm cells. CD81 immunoreactivity was predominantly detected in the sperm head, including the acrosome membrane, and in the midpiece, where it co-localized with APP, as well as in the post-acrosomal region. Furthermore, CD81 co-localizes with APP in the plasma membrane and in cellular projections in SH-SY5Y cells, where CD81 overexpression has an influence on APP levels, also visible in CHO cells. The analysis of CD81 interacting proteins such as AKT1 and cytoskeletonrelated proteins showed that CD81 is involved in a variety of pathways that may underlie cytoskeleton remodeling events, related to processes such as sperm motility, cell migration and neuritogenesis. These results deepen our understanding on the functions of CD81 and some of its interactors in sperm and neuronal cells.