An Experimental and Predictive Evaluation of Unsteady Gas Flow through Automotive Catalyst Elements

The incorporation of one-dimensional simulation codes within engine modelling applications has proved to be a useful tool in evaluating unsteady gas flow through elements in the exhaust system. This paper reports on an experimental and theoretical investigation into the behaviour of unsteady gas flow through catalyst substrate elements. A one-dimensional (1-D) catalyst model has been incorporated into a 1-D simulation code to predict this behaviour.

Experimental data was acquired using a ‘single pulse’ test rig. Substrate samples were tested under ambient conditions in order to investigate a range of regimes experienced by the catalyst during operation. This allowed reflection and transmission characteristics to be quantified in relation to both geometric and physical properties of substrate elements. Correlation between measured and predicted results is demonstrably good and the model provides an effective analysis tool for evaluating unsteady gas flow through different catalytic converter designs.

Molecular Computational Elements Encode Large Populations of Small Objects

Since the introduction of molecular computation1, 2, experimental molecular computational elements have grown3, 4, 5 to encompass small-scale integration6, arithmetic7 and games8, among others. However, the need for a practical application has been pressing. Here we present molecular computational identification (MCID), a demonstration that molecular logic and computation can be applied to a widely relevant issue. Examples of populations that need encoding in the microscopic world are cells in diagnostics or beads in combinatorial chemistry (tags). Taking advantage of the small size9 (about 1 nm) and large 'on/off' output ratios of molecular logic gates and using the great variety of logic types, input chemical combinations, switching thresholds and even gate arrays in addition to colours, we produce unique identifiers for members of populations of small polymer beads (about 100 m) used for synthesis of combinatorial libraries10, 11. Many millions of distinguishable tags become available. This method should be extensible to far smaller objects, with the only requirement being a 'wash and watch' protocol12. Our focus on converting molecular science into technology concerning analog sensors13, 14, turns to digital logic devices in the present work.

Quantum homogenization for continuous variables: Realization with linear optical elements

Recently Ziman et al. [Phys. Rev. A 65, 042105 (2002)] have introduced a concept of a universal quantum homogenizer which is a quantum machine that takes as input a given (system) qubit initially in an arbitrary state rho and a set of N reservoir qubits initially prepared in the state xi. The homogenizer realizes, in the limit sense, the transformation such that at the output each qubit is in an arbitrarily small neighborhood of the state xi irrespective of the initial states of the system and the reservoir qubits. In this paper we generalize the concept of quantum homogenization for qudits, that is, for d-dimensional quantum systems. We prove that the partial-swap operation induces a contractive map with the fixed point which is the original state of the reservoir. We propose an optical realization of the quantum homogenization for Gaussian states. We prove that an incoming state of a photon field is homogenized in an array of beam splitters. Using Simon's criterion, we study entanglement between outgoing beams from beam splitters. We derive an inseparability condition for a pair of output beams as a function of the degree of squeezing in input beams.

Glory and thresholds effects in H+D-2 reactive angular scattering

We analyse H + D-2 reactive angular scattering using the S- matrix elements obtained by Aoiz et al. and Althorpe et al. Enhancement of small angle scattering in the v' = 3

Including disabled children at school: Is it really as simple as 'a, c, d'?

This paper presents and discusses a social justice strategy that may progress inclusion in schools. The framework for this strategy is grounded in the theoretical discussions by Nancy Fraser and Trevor Gale about distributive, redistributive, and recognitive models of social justice. None of these theoretical frameworks, however, in themselves, offer a clear way forward for marginalised and misrecognised groups, such as disabled children, who need both educational resources and recognition in inclusive classrooms. The authors propose, however, that the work of Fraser and Gale combines into a social justice strategy, which consists of three elements (agency, competency, and diversity, or ‘a, c, d’) that can lead to inclusion. When disabled children are provided with the opportunity to exercise their agency, demonstrate their competence, and transform and affirm notions of diversity, then inclusion is more likely to occur in the classroom. Data from two research projects are presented using this framework to illustrate this argument, and the proposed ‘a, c, d’ social justice strategy towards inclusion.

The Yin and Yang of vitamin D receptor (VDR) signaling in neoplastic progression: Operational networks and tissue-specific growth control

Substantive evidence implicates vitamin D receptor (VDR) or its natural ligand 1a,25-(OH)2 D3 in modulation of tumor growth. However, both human and animal studies indicate tissue-specificity of effect. Epidemiological studies show both inverse and direct relationships between serum 25(OH)D levels and common solid cancers. VDR ablation affects carcinogen-induced tumorigenesis in a tissue-specific manner in model systems. Better understanding of the tissue-specificity of vitamin D-dependent molecular networks may provide insight into selective growth control by the seco-steroid, 1a,25-(OH)2 D3. This commentary considers complex factors that may influence the cell- or tissue-specificity of 1a,25-(OH)2 D3/VDR growth effects, including local synthesis, metabolism and transport of vitamin D and its metabolites, vitamin D receptor (VDR) expression and ligand-interactions, 1a,25-(OH)2 D3 genomic and non-genomic actions, Ca2+ flux, kinase activation, VDR interactions with activating and inhibitory vitamin D responsive elements (VDREs) within target gene promoters, VDR coregulator recruitment and differential effects on key downstream growth regulatory genes. We highlight some differences of VDR growth control relevant to colonic, esophageal, prostate, pancreatic and other cancers and assess the potential for development of selective prevention or treatment strategies.

High incidence of cryptic repeated elements in microsatellite flanking regions of galatheid genomes and its evolutionary implications

During the development of PCR primer sets for icrosatellite marker loci from enriched genomic libraries for three squat lobster species from Galatheidae (Decapoda: Anomura); Munida rugosa (Fabricius, 1775), M. sarsi (Huus, 1935), and Galathea strigosa (Linnaeus, 1761) (collectively known as squat lobsters), a number of unforeseen problems were encountered. These included PCR amplification failure, lack of amplification consistency, and the amplification of multiple fragments. Careful examination of microsatellite containing sequences revealed the existence of cryptic repeated elements on presumed unique flanking regions. BLAST analysis of these and other VNTR containing sequences (N 5 252) indicates that these cryptic elements can be grouped into families based upon sequence similarities. The unique features characterising these families suggest that different molecular mechanisms are involved. Of particular relevance is the association of microsatellites with mobile elements. This is the first reported observation of this phenomenon in crustaceans, and it also helps to explain why microsatellite primer development in galatheids has been relatively unsuccessful to date. We suggest a number of steps that can be used to identify similar problems in microsatellite marker development for other species, and also alternative approaches for both marker development and for the study of molecular evolution of species characterised by complex genome organisation. More specifically, we argue that new generation sequencing methodologies, which capitalise on parallel and multiplexed sequencing may pave the way forward for future crustacean research.

Behaviour of joints with bonded-in steel bars loaded parallel to the grain of timber elements

Within the sustainability context, this paper is extremely timely and relevant. The research focuses on broadening the use of timber structurally. The insight gained forms the basis for sustainable, fire resistant, economic and aesthetically pleasing moment resistant connections in timber.

CYTOCHEMICAL DEMONSTRATION OF CHOLINERGIC, SEROTONINERGIC AND PEPTIDERGIC NERVE ELEMENTS IN GORGODERINA-VITELLILOBA (TREMATODA, DIGENEA)

Standard enzyme cytochemical and indirect immunocytochemical techniques have been used in conjunction with light and confocal scanning laser microscopy (CSLM) to visualize cholinergic, serotoninergic and peptidergic nerve elements in whole-mount preparations of the amphibian urinary-bladder fluke, Gorgoderina vitelliloba. Cholinesterase (ChE) activity was localized in paired anterior ganglia, a connecting dorsal commissure and in the origins of the ventral nerve cords. Cholinergic ganglia were also evident in shelled embryos in the uterus. Serotonin-immunoreactivity (IR) was more extensive than ChE activity and was identified in both the central and peripheral nervous systems. Serotoninergic nerve fibres were associated with the somatic musculature and female reproductive ducts. Antisera to nine mammalian peptides and one invertebrate (FMRFamide) peptide have been used to investigate the peptidergic nervous system in the parasite. Immunoreactivity was obtained to five peptides, namely pancreatic polypeptide (PP), peptide YY (PYY), neuropeptide Y (NPY), substance P (SP) and FMRFamide. Peptidergic nerve fibres were found to be more abundant than demonstrable cholinergic or serotoninergic nerve fibres. NPY-IR was identified only in the main components of the central nervous system. However, PP- and PYY-IR occurred in the anterior ganglia, dorsal commissure, main nerve cords and in numerous small varicose fibres that ramified throughout the worm. Additionally, PP-immunoreactive nerve fibres were found to innervate the musculature of the female reproductive tracts. Six sites of IR were found in the acetabulum, using antisera directed towards the C-terminal end of PP and PYY, and these matched with the distribution of six non-ciliated rosette-like papillae observed by scanning electron microscopy. SP- and FMRFamide-IR were identified in the CNS, and FMRFamide-immunopositive nerve fibres were also evident in association with the gonopore/cirrus region and with the terminal excretory pore. Results are discussed with respect to possible roles for each of the neurochemical types.

Characterization of IS2112, a new insertion sequence from Rhodococcus, and its relationship with mobile elements belonging to the IS110 family

A new insertion sequence (IS2112) was identified in the genome of the 1-haloalkane-utilizing bacterium Rhodococcus rhodochrous NCIMB 13064. The insertion element is 1415 bp long, does not contain terminal inverted repeats, and is not flanked by directly repeated sequences. IS2112 belongs to the IS110 family of transposable elements, and forms a separate subfamily, along with IS116, Two copies of IS2112 were found in R, rhodochrous NCIMB 13064 and one, two or three copies of a similar sequence were detected in five other 1-haloalkane-degrading Rhodococcus strains. There were no sequences homologous to IS2112 found in the l-haloalkane-degrading 'Pseudomonas pavonaceae' 170 and Rhodococcus sp, HA1 or in several Rhodococcus strains which do not utilize haloalkanes, IS2112 was originally found in plasmid pRTL1 of R. rhodochrous NCIMB 13064 which harbours genes encoding utilization of l-haloalkanes, and was located 5 kbp upstream of the haloalkane dehalogenase gene (dhaA), Although the second copy of IS2112 in strain NCIMB 13064 was also present on the pRTL1 plasmid, these sequences do not apparently comprise a single composite transposon encoding haloalkane utilization. An analysis of derivatives of NCIMB 13064 revealed that IS2112 was involved in genome rearrangements. IS2112 appeared to change its location as a result of transposition and as a result of other rearrangements of the NCIMB 13064 genome.

Pull-out behaviour of axially loaded basalt fibre reinforced polymer (BFRP) rods bonded parallel to the grain of glulam elements

Synopsis: Bonded-in rod timber joints off er several advantages over conventional types of joint, including high local force transfer, very stiff connections, and improved ?re and aesthetic properties since the connection is completely hidden in the insulating timber members. More recently, the use of ?bre reinforced polymer (FRP) as a connecting rod, alternative to steel rods, in bonded-in rod connections for timber structures has been investigated. However, the investigation into the behaviour of such joints is limited, in particular, connections involving basalt ?bre reinforced polymers (BFRP) bars - which is the primary focus of this research. This paper presents an experimental programme conducted to investigate the behaviour of bonded-in BFRP bars loaded parallel to the grain of glulam members. Tensile pull-out tests were conducted to examine the effect of bonded length and bond stress-slip on the structural capacity of the connection. An analytical design expression for predicting pull-out capacity is proposed and the results have been compared with some established design equations. It was found that pull-out load increased approximately linearly with the bonded length, up to maximum which occurred at a bonded length of 15 times the hole diameter, and did not increase beyond this bonded length. The most signi?cant failure modes were failure at the timber/adhesive interface followed by pullout of the BFRP rod. Increased bonded lengths resulted in higher bond slip values compared to lower equivalent bonded lengths. The proposed design model gave the best predictions of pull-out capacity compared with other existing models.