Creating New Design-Build-Test Experiences as Outputs of Undergraduate Design-Build-Test Projects

This paper describes a methodology of using individual engineering undergraduate student projects as a means of effectively and efficiently developing new Design-Build-Test (DBT) learning experiences and challenges.
A key aspect of the rationale for this approach is that it benefits all parties. The student undertaking the individual project gets an authentic experience of producing a functional artefact, which has been the result of a design process that addresses conception, design, implementation and operation. The supervising faculty member benefits from live prototyping of new curriculum content and resources with a student who is at a similar level of knowledge and experience as the intended end users of the DBT outputs. The multiple students who ultimately undertake the DBT experiences / challenges benefit from the enhanced nature of a learning experience which has been “road tested” and optimised.
To demonstrate the methodology the paper will describe a case study example of an individual project completed in 2015. This resulted in a DBT design challenge with a theme of designing a catapult for throwing table tennis balls, the device being made from components laser cut from medium density fibreboard (MDF). Further three different modes of operation will be described which use the same resource materials but operate over different timescales and with different learning outcomes, from an icebreaker exercise focused on developing team dynamics through to full DBT where students get an opportunity to experience the full impact of their design decisions by competing against other students with a catapult they have designed and built themselves.

Evaluation of creative problem solving abilities in undergraduate structural engineers through interdisciplinary problem based learning

For a structural engineer, effective communication and interaction with architects cannot be underestimated as a key skill to success throughout their professional career. Structural engineers and architects have to share a common language and understanding of each other in order to achieve the most desirable architectural and structural designs. This interaction and engagement develops during their professional career but needs to be nurtured during their undergraduate studies. The objective of this paper is to present the strategies employed to engage higher order thinking in structural engineering students in order to help them solve complex problem-based learning (PBL) design scenarios presented by architecture students. The strategies employed were applied in the experimental setting of an undergraduate module in structural engineering at Queen’s University Belfast in the UK. The strategies employed were active learning to engage with content knowledge, the use of physical conceptual structural models to reinforce key concepts and finally, reinforcing the need for hand sketching of ideas to promote higher order problem-solving. The strategies employed were evaluated through student survey, student feedback and module facilitator (this author) reflection. The strategies were qualitatively perceived by the tutor and quantitatively evaluated by students in a cross-sectional study to help interaction with the architecture students, aid interdisciplinary learning and help students creatively solve problems (through higher order thinking). The students clearly enjoyed this module and in particular interacting with structural engineering tutors and students from another discipline

The impact of a simulated intervention on attitudes of undergraduate nursing and medical students towards end of life care provision

Background: The concerns of undergraduate nursing and medical students’ regarding end of life care are well documented. Many report feelings of emotional distress, anxiety and a lack of preparation to provide care to patients at end of life and their families. Evidence suggests that increased exposure to patients who are dying and their families can improve attitudes toward end of life care. In the absence of such clinical exposure, simulation provides experiential learning with outcomes comparable to that of clinical practice. The aim of this study was therefore to assess the impact of a simulated intervention on the attitudes of undergraduate nursing and medical students towards end of life care.
Methods: A pilot quasi-experimental, pretest-posttest design. Attitudes towards end of life care were measured using the Frommelt Attitudes Towards Care of the Dying Part B Scale which was administered pre and post a simulated clinical scenario. 19 undergraduate nursing and medical students were recruited from one large Higher Education Institution in the United Kingdom.
Results: The results of this pilot study confirm that a simulated end of life care intervention has a positive impact on the attitudes of undergraduate nursing and medical students towards end of life care (p < 0.001).
Conclusions: Active, experiential learning in the form of simulation teaching helps improve attitudes of undergraduate nursing and medical students towards end of life. In the absence of clinical exposure, simulation is a viable alternative to help prepare students for their professional role regarding end of life care.

Ultrasound in undergraduate medical education: A systematic and critical review

Introduction: Point-of-care ultrasound (POCUS) use in clinical care is growing rapidly, and advocates have recently proposed the integration of ultrasound into undergraduate medical education (UME). The evidentiary basis for this integration has not been evaluated critically or systematically. In this study, we conducted a critical and systematic review framed by the rationales enumerated by advocates of ultrasound in UME in academic publications.

Methods: This research was conducted in two phases. First, the dominant discursive rationales for the integration of ultrasound in UME were identified using techniques from Foucauldian critical discourse analysis (CDA) from an archive of 403 academic publications. We then sought empirical evidence in support of theses rationales, using a critical synthesis methodology also adapted from CDA.

Results: We identified four dominant discursive rationales, with different levels of evidentiary support. Ultrasound was not demonstrated to improve students’ understanding of anatomy. The benefit of ultrasound in teaching physical examination was inconsistent,and rests on minimal evidence. With POCUS, students’ diagnostic accuracy was improved for certain pathologies, but findings were inconsistent for others. Finally, the rationale that ultrasound training in UME will improve quality of patient care was difficult to evaluate.

Discussion: Our analysis has shown that the frequently repeated rationales for the integration of ultrasound in UME are not supported by a sufficient base of empirical research. The repetition of these dominant discursive rationales in academic publications legitimizes them and may preclude further primary research. Since the value of clinical ultrasound use by medical students remains unproven, educators must consider whether the associated financial and temporal costs are justified or whether more research is required.

A literature review to Examine the Validity and Reliability of group poster presentations as an assessment method of a module in an undergraduate nursing degree programme

The introduction of a poster presentation as a formative assessment method over a multiple choice examination after the first phase of a three phase “health and well-being” module in an undergraduate nursing degree programme was greeted with a storm of criticism from fellow lecturers stating that poster presentations are not valid or reliable and totally irrelevant to the assessment of learning in the module. This paper seeks to investigate these criticisms by investigating the literature regarding producing nurses fit for practice, nurse curriculum development and wider nurse education, the purpose of assessment, validity and reliability to critically evaluate the poster presentation as a legitimate assessment method for these aims.

Enhancing the Manufacturing Knowledge of Undergraduate Engineering Students: A Case Study of a Design-Build-Test Challenge Involving Folding Bicycles

Many engineers currently in professional practice will have gained a degree level qualification which involved studying a curriculum heavy with mathematics and engineering science. While this knowledge is vital to the engineering design process so also is manufacturing knowledge, if the resulting designs are to be both technically and commercially viable.
The methodology advanced by the CDIO Initiative aims to improve engineering education by teaching in the context of Conceiving, Designing, Implementing and Operating products, processes or systems. A key element of this approach is the use of Design-Built-Test (DBT) projects as the core of an integrated curriculum. This approach facilitates the development of professional skills as well as the application of technical knowledge and skills developed in other parts of the degree programme. This approach also changes the role of lecturer to that of facilitator / coach in an active learning environment in which students gain concrete experiences that support their development.
The case study herein describes Mechanical Engineering undergraduate student involvement in the manufacture and assembly of concept and functional prototypes of a folding bicycle.

Situation Background Assessment Recommendation (SBAR): Undergraduate Perspectives

Situation Background Assessment and Recommendation (SBAR): Undergraduate Perspectives C Morgan, L Adams, J Murray, R Dunlop, IK Walsh. Ian K Walsh, Centre for Medical Education, Queen’s University Belfast, Mulhouse Building, Royal Victoria Hospital, Grosvenor Road, Belfast BT12 6DP Background and Purpose: Structured communication tools are used to improve team communication quality.1,2 The Situation Background Assessment and Recommendation (SBAR) tool is widely adopted within patient safety.3 SBAR effectiveness is reportedly equivocal, suggesting use is not sustained beyond initial training.4-6 Understanding perspectives of those using SBAR may further improve clinical communication. We investigated senior medical undergraduate perspectives on SBAR, particularly when communicating with senior colleagues. Methodology: Mixed methods data collection was used. A previously piloted questionnaire with 12 five point Lickert scale questions and 3 open questions was given to all final year medical students. A subgroup also participated in 10 focus groups, deploying strictly structured audio-recorded questions. Selection was by convenience sampling, data gathered by open text questions and comments transcribed verbatim. In-vivo coding (iterative, towards data saturation) preceded thematic analysis. Results: 233 of 255 students (91%) completed the survey. 1. There were clearly contradictory viewpoints on SBAR usage. A recurrent theme was a desire for formal feedback and a relative lack of practice/experience with SBAR. 2. Students reported SBAR as having variable interpretation between individuals; limiting use as a shared mental model. 3. Brief training sessions are insufficient to embed the tool. 4. Most students reported SBAR helping effective communication, especially by providing structure in stressful situations. 5. Only 18.5% of students felt an alternative resource might be needed. Sub analysis of the themes highlighted: A. Lack of clarity regarding what information to include and information placement within the acronym, B. Senior colleague negative response to SBAR C. Lack of conciseness with the tool. Discussion and Conclusions: Despite a wide range of contradictory interpretation of SBAR utility, most students wish to retain the resource. More practice opportunities/feedback may enhance user confidence and understanding. References: (1) Leonard M, Graham S, Bonacum D. The human factor: the critical importance of effective teamwork and communication in providing safe care. Quality & Safety in Health Care 2004 Oct;13(Suppl 1):85-90. (2) d'Agincourt-Canning LG, Kissoon N, Singal M, Pitfield AF. Culture, communication and safety: lessons from the airline industry. Indian J Pediatr 2011 Jun;78(6):703-708. (3) Dunsford J. Structured communication: improving patient safety with SBAR. Nurs Womens Health 2009 Oct;13(5):384-390. (4) Compton J, Copeland K, Flanders S, Cassity C, Spetman M, Xiao Y, et al. Implementing SBAR across a large multihospital health system. Jt Comm J Qual Patient Saf 2012 Jun;38(6):261-268. (5) Ludikhuize J, de Jonge E, Goossens A. Measuring adherence among nurses one year after training in applying the Modified Early Warning Score and Situation-Background-Assessment-Recommendation instruments. Resuscitation 2011 Nov;82(11):1428-1433. (6) Cunningham NJ, Weiland TJ, van Dijk J, Paddle P, Shilkofski N, Cunningham NY. Telephone referrals by junior doctors: a randomised controlled trial assessing the impact of SBAR in a simulated setting. Postgrad Med J 2012 Nov;88(1045):619-626.