Rapid identification of precursor cDNAs encoding five structural classes of antimicrobial peptides from pickerel frog (Rana palustris) skin secretion by single step “shotgun” cloning.

The skin secretion of the North American pickerel frog (Rana palustris) has long been known to have pronounced noxious/toxic properties and to be highly effective in defence against predators and against other sympatric amphibians. As it consists largely of a complex mixture of peptides, it has been subjected to systematic peptidomic study but there has been little focus on molecular cloning of peptide-encoding cDNAs and by deduction, the biosynthetic precursors that they encode. Here, we demonstrate that the cDNAs encoding the five major structural families of antimicrobial peptides can be elucidated by a single step “shotgun” cloning approach using a cDNA library constructed from the source material of the peptidomic studies—the defensive skin secretion itself. Using a degenerate primer pool designed to a highly conserved nucleic acid sequence 5' to the initiation codon of known antimicrobial peptide precursor transcripts, we amplified cDNA sequences representing five major classes of antimicrobial peptides, such as esculentins, brevinins, ranatuerins, palustrins and temporins. Bioinformatic comparisons of precursor open-reading frames and nucleic acid sequences revealed high degrees of structural similarities between analogous peptides of R. palustris and the Chinese bamboo odorous frog, Rana versabilis. This approach thus constitutes a robust technique that can be used either alone or ideally, in parallel with peptidomic analysis of skin secretion, to rapidly extract primary structural information on amphibian skin secretion peptides and their biosynthetic precursors.

Light emission from scanning tunnelling microscope on polycrystalline Au films - what is happening at the single-grain level?

When operated with a metallic tip and sample the scanning tunnelling microscope constitutes a nanoscale, plasmonic light source yielding broadband emission up to a photon energy determined by the applied bias. The emission is due to tunnelling electron excitation and subsequent radiative decay of localized plasmon modes, which can be on the lateral scale of a single metal grain (similar to 25 nm) or less. For a Au-tip/Au-polycrystalline sample under ambient conditions it is found that the intensity and spectral content of the emitted light are not dependent on the lateral grain dimension, but are predominantly determined by the tip geometry. However, the intensity increases strongly with increasing film thickness (grain depth) up to 20-25 nm or approximately the skin depth of the Au film. Photon maps can show less emissive grains and two classes of this occurrence are distinguished. The first is geometrical in origin - a double-tip structure in this case - while the second is due to a contamination-induced lowering of the local work function that causes the tunnel gap to increase. It is suggested that differences in work-function lowering between grains presenting different crystalline facets, combined with an exponential decay in emitted light intensity with tip - sample distance, leads to grain contrast. These results are relevant to tip-enhanced Raman scattering and the fabrication of micro/nano-scale planar, light-emitting tunnel devices.

Investigating Hydraulically Active Fractures in A Shallow Meta-Sedimentary Bedrock Aquifer Using Single Well Tracer Testing, Mount Stewart, Northern Ireland

Knowledge of groundwater flow/mass transport, in poorly productive aquifers which underlie over 65% of the island of Ireland, is necessary for effective management of catchment water quality and aquatic ecology. This research focuses on a fractured low-grade Ordovician/Silurian greywacke sequence which underlies approximately 25% of the northern half of Ireland. Knowledge of the unit’s hydrogeological properties remain largely restricted to localised single well open hole “transmissivity” values. Current hydrogeological conceptual models of the Greywacke view the bulk of groundwater flowing through fractures in an otherwise impermeable bedrock mass.
Core analysis permits fracture characterisation, although not all identified fractures may be involved in groundwater flow. Traditional in-situ hydraulic characterisation relies on cumbersome techniques such as packer testing or geophysical borehole logging (e.g. flowmeters). Queen’s University Belfast is currently carrying out hydraulic characterization of 16 boreholes at its Greywacke Hydrogeological Research Site at Mount Stewart, Northern Ireland.
Development of dye dilution methods, using a recently-developed downhole fluorometer, provided a portable, user-friendly, and inexpensive means of detecting hydraulically active intervals in open boreholes. Measurements in a 55m deep hole, three days following fluorescent dye injection, demonstrated the ability of the technique to detect two discrete hydraulically active intervals corresponding to zones identified by caliper and heat-pulse flowmeter logs. High resolution acoustic televiewer logs revealed the zones to correspond to two steeply dipping fractured intervals. Results suggest the rock can have effective porosities of the order of 0.1%.
Study findings demonstrate dye dilution’s utility in characterizing groundwater flow in fractured aquifers. Tests on remaining holes will be completed at different times following injection to identify less permeable fractures and develop an improved understanding of the structural controls on groundwater flow in the uppermost metres of competent bedrock.

Levels and patterns of population genetic diversity in the red seaweed Chondrus crispus (Florideophyceae): a direct comparison of single nucleotide polymorphisms and microsatellites

Single nucleotide polymorphisms (SNPs) are predicted to supersede microsatellites as the marker of choice for population genetic studies in the near future. To date, however, very few studies have directly compared both marker systems in natural populations, particularly in non-model organisms. In the present study, we compared the utility of SNPs and microsatellites for population genetic analysis of the red seaweed Chondrus crispus (Florideophyceae). Six SNP loci yielded very different patterns of intrapopulation genetic diversity compared to those obtained using seven moderately (mean 5.2 alleles) polymorphic microsatellite loci, although Bayesian clustering analysis gave largely congruent results between the two marker classes. A weak but significant pattern of isolation-by-distance was observed across scales from a few hundred metres to approximately 200?km using the combined SNP and microsatellite data set of 13 loci. Over larger scales, however, there was little correlation between genetic divergence and geographical distance. Our findings suggest that even a moderate number of SNPs is sufficient to determine patterns of genetic diversity across natural populations, and also highlight the fact that patterns of genetic variation in seaweeds arise through a complex interplay of short- and long-term natural processes, as well as anthropogenic influence.

The effect of melt viscosity on thermal efficiency for single screw extrusion of HDPE

In this work, a highly instrumented single screw extruder has been used to study the effect of polymer rheology on the thermal efficiency of the extrusion process. Three different molecular weight grades of high density polyethylene (HDPE) were extruded at a range of conditions. Three geometries of extruder screws were used at several set temperatures and screw rotation speeds. The extruder was equipped with real-time quantification of energy consumption; thermal dynamics of the process were examined using thermocouple grid sensors at the entrance to the die. Results showed that polymer rheology had a significant effect on process energy consumption and thermal homogeneity of the melt. Highest specific energy consumption and poorest homogeneity was observed for the highest viscosity grade of HDPE. Extruder screw geometry, set extrusion temperature and screw rotation speed were also found to have a direct effect on energy consumption and melt consistency. In particular, specific energy consumption was lower using a barrier flighted screw compared to single flighted screws at the same set conditions. These results highlight the complex nature of extrusion thermal dynamics and provide evidence that rheological properties of the polymer can significantly influence the thermal efficiency of the process.

Radium-223 and concomitant therapies in patients with metastatic castration-resistant prostate cancer: an international, early access, open-label, single-arm phase 3b trial

BACKGROUND: In the previously reported ALSYMPCA trial in patients with castration-resistant prostate cancer and symptomatic bone metastases, overall survival was significantly longer in patients treated with radium-223 dichloride (radium-223) than in patients treated with placebo. In this study, we investigated safety and overall survival in radium-223 treated patients in an early access programme done after the ALSYMPCA study and before regulatory approval of radium-223.

METHODS: We did an international, prospective, interventional, open-label, single-arm, phase 3b study. Enrolled patients were aged 18 years or older with histologically or cytologically confirmed progressive bone-predominant metastatic castration-resistant prostate cancer with two or more skeletal metastases on imaging (with no restriction as to whether they were symptomatic or asymptomatic; without visceral disease but lymph node metastases were allowed). Patients received intravenous injections of radium-223, 50 kBq/kg (current recommendation 55 kBq/kg after implementation of National Institute of Standards and Technology update on April 18, 2016) every 4 weeks for up to six injections. Other concomitant anticancer therapies were allowed. Primary endpoints were safety and overall survival. The safety and efficacy analyses were done on all patients who received at least one dose of the study drug. The study has been completed, and we report the final analysis here. This study is registered with ClinicalTrials.gov, number NCT01618370, and the European Union Clinical Trials Register, EudraCT number 2012-000075-16.

FINDINGS: Between July 22, 2012, and Dec 19, 2013, 839 patients were enrolled from 113 sites in 14 countries. 696 patients received one or more doses of radium-223; 403 (58%) of these patients had all six planned injections. Any-grade treatment-emergent adverse events occurred in 523 (75%) of 696 patients; any-grade treatment-emergent adverse events deemed to be related to treatment were reported in 281 (40%) patients. The most common grade 3 or worse treatment-related treatment-emergent adverse events were anaemia in 32 (5%) patients, thrombocytopenia in 15 (2%) patients, neutropenia in ten (1%) patients, and leucopenia in nine (1%) patients. Any grade of serious adverse events were reported in 243 (35%) patients. Median follow-up was 7·5 months (IQR 5-11) and 210 deaths were reported; median overall survival was 16 months (95% CI 13-not available [NA]). In an exploratory analysis of overall survival with predefined factors, median overall survival was longer for: patients with baseline alkaline phosphatase concentration less than the upper limit of normal (ULN; median NA, 95% CI 16 months-NA) than for patients with an alkaline phosphatase concentration equal to or greater than the ULN (median 12 months, 11-15); patients with baseline haemoglobin levels 10 g/dL or greater (median 17 months, 14-NA) than for patients with haemoglobin levels less than 10 g/dL (median 10 months, 8-14); patients with a baseline Eastern Cooperative Oncology Group performance status (ECOG PS) of 0 (median NA, 17 months-NA) than for patients with an ECOG PS of 1 (median 13 months, 11-NA) or an ECOG PS of 2 or more (median 7 months, 5-11); and for patients with no reported baseline pain (median NA, 16 months-NA) than for those with mild pain (median 14 months, 13-NA) or moderate-severe pain (median 11 months, 9-13). Median overall survival was also longer in patients who received radium-223 plus abiraterone, enzalutamide, or both (median NA, 95% CI 16 months-NA) than in those who did not receive these agents (median 13 months, 12-16), and in patients who received radium-223 plus denosumab (median NA, 15 months-NA) than in patients who received radium-223 without denosumab (median 13 months, 12-NA).

INTERPRETATION: Our findings show that radium-223 can be safely combined with abiraterone or enzalutamide, which are now both part of the standard of care for patients with metastatic castration-resistant prostate cancer. Furthermore, our findings extend to patients who were asymptomatic at baseline, unlike those enrolled in the pivotal ALSYMPCA study. The findings of prolonged survival in patients treated with concomitant abiraterone, enzalutamide, or denosumab require confirmation in prospective randomised trials.

FUNDING: Pharmaceutical Division of Bayer.