The cost of water from an autonomous wave-powered desalination plant

A techno-economic model of an autonomous wave-powered desalination plant is developed and indicates that fresh water can be produced for as little as £0.45/m3. The advantages of an autonomous wave-powered desalination plant are also discussed indicating that the real value of the system is enhanced due to its flexibility for deployment and reduced environmental impact. The modelled plant consists of the Oyster wave energy converter, conventional reverse osmosis membranes and a pressure exchanger–intensifier for energy recovery. A time-domain model of the plant is produced using wave-tank experimentation to calibrate the model of Oyster, manufacturer's data for the model of the reverse osmosis membranes and a hydraulic model of the pressure exchanger–intensifier. The economic model of the plant uses best-estimate cost data which are reduced to annualised costs to facilitate the calculation of the cost of water. Finally, the barriers to the deployment of this technology are discussed, but they are not considered insurmountable.

The cost of treating severe refractory asthma in the UK: an economic analysis from the British Thoracic Society Difficult Asthma Registry

Severe refractory asthma poses a substantial burden in terms of healthcare costs but relatively little is known about the factors which drive these costs. This study uses data from the British Thoracic Society Difficult Asthma Registry (n=596) to estimate direct healthcare treatment costs from an National Health Service perspective and examines factors that explain variations in costs. Annual mean treatment costs among severe refractory asthma patients were £2912 (SD £2212) to £4217 (SD £2449). Significant predictors of costs were FEV1% predicted, location of care, maintenance oral corticosteroid treatment and body mass index. Treating individuals with severe refractory asthma presents a substantial cost to the health service.

The Cost of Drug Use in Adolescence: Young People, Money and Substance Abuse.

It is now common for young people in full-time compulsory education to hold part-time jobs. However, whilst the 1990s experienced a rise in illicit drug use particularly among young people and an increase in the level of interest for identifying factors associated with drug use, little attention has been paid to the influence of the money young people have to spend and its potential links with drug use. Four thousand five hundred and twenty-four young people living in Northern Ireland completed a questionnaire in school year 10 (aged 13/14 years). The findings suggested there was a positive association between the amount of money (and its source) young people received and higher rates of drug use. The study concludes that money, and how it is spent by young people, may be an important factor for consideration when investigating drug use during adolescence. The findings may help inform drug prevention strategies particularly through advice on money management, and taking responsibility for their own money.

Once a Criminal, Always a Criminal?: ‘Redeemability’ and the Psychology of Punitive Public Attitudes

Several studies have sought to link punitive public attitudes to attribution style and/or lay theories of crime. This research finds that those who believe criminal acts are the result of freely chosen and willful behavior are more likely to be punitive than those who feel crime is the result of external circumstances and constraints. These analyses focus on only one dimension of attributions: locus of control (internal/external). In this analysis, we include a second dimension, thought to be a better predictor of attitudes in social psychological research: stability/instability. In addition to measuring lay theories of crime causation, we also test for “belief in redeemability” (or beliefs about the ability of deviants to change their ways). Our hypothesis is that this other dimension of personal attributions (stability/instability) may be as critical in explaining support for highly punitive criminal justice policies as beliefs about criminal responsibility. We find evidence supportive of this model in an analysis of data from postal survey of residents of six areas in England.

Climate change and the cost of conserving species in Madagascar

We examined the cost of conserving species as climate changes using Madagascar as an example. We used a Maxent species distribution model to predict the ranges of 74 plant species endemic to the forests of Madagascar from 2000-2080 in three climate scenarios. We set a conservation target of achieving 10,000 hectares of forest cover for each species, and calculated the cost of achieving this target under each climate scenario. We interviewed natural forest restoration project managers and conducted a literature review to obtain the net present cost per hectare of management actions to maintain or establish forest cover. For each species we added hectares of land from lowest to highest cost per additional year of forest cover until the conservation target was achieved throughout the time period. Climate change was predicted to reduce the size of species’ ranges, the overlap between species’ ranges and existing or planned protected areas, and the overlap between species’ ranges and existing forest. As a result, climate change increased the cost of achieving the conservation target by necessitating successively more costly management actions: additional management within existing protected areas (US$0-60/ha), avoidance of forest degradation (loss of biomass) in community-managed areas ($160-576/ha), avoidance of deforestation in unprotected areas ($252-1069/ha), and establishment of forest on non-forested land within protected areas ($802-2710/ha), in community-managed areas ($962-3226/ha), and in unprotected areas ($1054-3719/ha). Our results suggest that though forest restoration may be required for the conservation of some species as climate changes, it is more cost-effective to maintain existing forest wherever possible.

Modelling lay-up automation and production rate interaction on the cost of large stiffened panel components

This paper presents an integrated design and costing method for large stiffened panels for the purpose of investigating the influence and interaction of lay-up technology and production rate on manufacturing cost. A series of wing cover panels (≈586kg, 19·9m2) have been sized with realistic requirements considering manual and automated lay-up routes. The integrated method has enabled the quantification of component unit cost sensitivity to changes in annual production rate and employed equipment maximum deposition rate. Moreover the results demonstrate the interconnected relationship between lay-up process and panel design, and unit cost. The optimum unit cost solution when using automated lay-up is a combination of the minimum deposition rate and minimum number of lay-up machines to meet the required production rate. However, the location of the optimum unit cost, at the boundaries between the number of lay-up machines required, can make unit cost very sensitive to small changes in component design, production rate, and equipment maximum deposition rate. - See more at: http://aerosociety.com/News/Publications/Aero-Journal/Online/1941/Modelling-layup-automation-and-production-rate-interaction-on-the-cost-of-large-stiffened-panel-components#sthash.0fLuu9iG.dpuf

The Characteristics of Wave Impacts on an Oscillating Wave Surge Converter

Wave impacts on an oscillating wave surge converter are examined using experimental and numerical methods. The mechanics of the impact event are identified experimentally with the use of images recorded with a high-speed camera. It is shown that it is the device that impacts the wave rather than a breaking wave impacting the device. Numerical simulations using two different approaches are used to further understand the issue. Good agreement is shown between numerical simulations and experimental measurements at 25th scale.

The Characteristics of Wave Impacts on an Oscillating Wave Surge Converter

Wave impacts on an Oscillating Wave Surge Converter are examined using experimental and numerical methods. The mechanics of the impact event are identified experimentally with the use of images recorded with a high speed camera. It is shown that it is the device which impacts the wave rather than a breaking wave impacting the device. Numerical simulations using two different approaches are used to further understand the issue. Good agreement is shown between numerical simulations and experimental measurements at 25th scale.

Effects of tip structure on the generation of metal clusters by an STM tip: a way to control the orientation of nanocrystallites?

The role of the crystalline orientation of the STM tip in the generation of metal clusters is studied by atom dynamics simulations. When a (111) facet is facing the surface, the process is accompanied by a perturbation of the surface stronger than that observed for more open tip structures. This implies a technological application: the possibility of orienting a nanocrystallite deposited on a tip according to the changes observed in the force on the tip.

The Cost of Sustainability Capital and the Creation of Sustainable Value by Companies

We develop and apply a valuation methodology to calculate the cost of sustainability capital, and, eventually, sustainable value creation of companies. Sustainable development posits that decisions must take into account all forms of capital rather than just economic capital. We develop a methodology that allows calculation of the costs that are associated with the use of different forms of capital. Our methodology borrows the idea from financial economics that the return on capital has to cover the cost of capital. Capital costs are determined as opportunity costs, that is, the forgone returns that would have been created by alternative investments. We apply and extend the logic of opportunity costs to the valuation not only of economic capital but also of other forms of capital. This allows (a) integrated analysis of use of different forms of capital based on a value-based aggregation of different forms of capital, (b) determination of the opportunity cost of a bundle of different forms of capital used in a company, called cost of sustainability capital, (c) calculation of sustainability efficiency of companies, and (d) calculation of sustainable value creation, that is, the value above the cost of sustainability capital. By expanding the well-established logic of the valuation of economic capital in financial markets to cover other forms of capital, we provide a methodology that allows determination of the most efficient allocation of sustainability capital for sustainable value creation in companies. We demonstrate the practicability of the methodology by the valuation of the sustainability performance of British Petroleum (BP).

Understandings of citizenship education in Northern Ireland and the Republic of Ireland: Public discourses among stakeholders in the public and private sectors

Internationally, citizenship education has come to the fore in the past decade. It may be particularly importantwithin the context of societies with a legacy of political conflict, such as Northern Ireland and the Republic of Ireland, where it is being implemented as part of the statutory curriculum. This article explores understandingsof citizenship education among stakeholders in the private and public sectors in Northern Ireland and the Republic of Ireland with the aim to compare these with curricular conceptualizations of citizenship inboth contexts. Semi-structured interviews were conducted in both societies involving non-governmentalorganizations, political parties, trade unions and the police. Results indicated that levels of awareness aboutcitizenship education varied substantially and understandings mainly reflected current theory and curriculumpractice in citizenship. Commonalities emerged as in both societies similar key concepts were identified whiledifferences transpired over issues relating to national identity and political conflict, which may raise questionsfor history and citizenship education in both societies.