Increased Exposure to Rigid Routines can Lead to Increased Challenging Behavior Following Changes to Those Routines

Several neurodevelopmental disorders are associated with preference for routine and challenging behavior following changes to routines. We examine individuals with Prader–Willi syndrome, who show elevated levels of this behavior, to better understand how previous experience of a routine can affect challenging behavior elicited by disruption to that routine. Play based challenges exposed 16 participants to routines, which were either adhered to or changed. Temper outburst behaviors, heart rate and movement were measured. As participants were exposed to routines for longer before a change (between 10 and 80 min; within participants), more temper outburst behaviors were elicited by changes. Increased emotional arousal was also elicited, which was indexed by heart rate increases not driven by movement. Further study will be important to understand whether current intervention approaches that limit exposure to changes, may benefit from the structured integration of flexibility to ensure that the opportunity for routine establishment is also limited.

Simulation of coupled heat and moisture transfer in air-conditioned buildings

The simultaneous heat and moisture transfer in the building envelope has an important influence on the indoor environment and the overall performance of buildings. In this paper, a model for predicting whole building heat and moisture transfer was presented. Both heat and moisture transfer in the building envelope and indoor air were simultaneously considered; their interactions were modeled. The coupled model takes into account most of the main hygrothermal effects in buildings. The coupled system model was implemented in MATLAB-Simulink, and validated by using a series of published testing tools. The new program was applied to investigate the moisture transfer effect on indoor air humidity and building energy consumption under different climates. The results show that the use of more detailed simulation routines can result in improvements to the building's design for energy optimisation through the choice of proper hygroscopic materials, which would not be indicated by simpler calculation techniques.

"All Have to Live in Me...": A Study of the Use of English Alongside Other African Languages in a Kenyan School

The purpose of this paper, which builds on an earlier paper published in this Journal (Vol. 20, No. 6), is to develop the discussion around how English has been taught, used and perceived in Kenya, using data gathered from a small second-level English-medium school in Kenya. The complex relationships between language and identity are at work in the everyday routines of both staff and pupils within such a context. The paper seeks to set out a clear methodology for gathering data which could help describe these relationships with more clarity while also subjecting the data to analysis informed by the growing body of research and theory that focuses on language policy in post-colonial and neo-colonial settings. Finally, these pieces of data are used as the basis of a further exploration of the implications for classroom practice in teaching English in this environment.

An exploratory study of Principal Investigator roles in UK University Proof-of-Concept processes: an Absorptive capacity perspective

The increasing emphasis on academic entrepreneurship, technology transfer and research commercialisation within UK universities is predicated on basic research being developed by academics into commercial entities such as university spin-off companies or licensing arrangements. However, this process is fraught with challenges and risks, given the degree of uncertainty regarding future returns. In an attempt to minimise such risks, the Proof-of-Concept (PoC) process has been developed within University Science Park Incubators (USIs) to test the technological, business and market potential of embryonic technology. The key or the pivotal stakeholder within the PoC is the Principal Investigator (PI), who is usually the lead academic responsible for the embryonic technology. Within the current literature, there appears to be a lack of research pertaining to the role of the PI in the PoC process. Moreover, Absorptive Capacity (ACAP) has emerged within the literature as a theoretical framework or lens for exploring the development and application of new knowledge and technology, where the USI is the organisation considered in the current study. Therefore, the aim of this paper is to explore the role and influence of the PI in the PoC process within a USI setting using an ACAP perspective. The research involved a multiple case analysis of PoC applications within a UK university USI. The results demonstrate the role of the PI in developing practices and routines within the PoC process. These practices and processes were initially tacit and informal in nature but became more explicit and formal over time so that knowledge was retained within the USI after the PIs had completed the PoC process. © 2010 The Authors. R&D Management © 2010 Blackwell Publishing Ltd.

Absorbing new knowledge in small and medium-sized enterprises: A multiple case analysis of Six Sigma

The primary aim of this article is to critically analyse the development of Six Sigma theory and practice within small and medium-sized enterprises (SMEs) using a multiple case study approach. The article also explores the subsequent development of Lean Six Sigma as a means of addressing the perceived limitations of the efficacy of Six Sigma in this context. The overarching theoretical framework is that of absorptive capacity, where Six Sigma is conceptualized as new knowledge to be absorbed by smaller firms. The findings from a multiple case study involving repeat interviews and focus groups informed the development of an analytical model demonstrating the dynamic underlying routines for the absorptive capacity process and the development of a number of summative propositions relating the characteristics of SMEs to Six Sigma and Lean Six Sigma implementation.

A virtual inspection framework for precision manufacturing of aerofoil components

The finite element method plays an extremely important role in forging process design as it provides a valid means to quantify forging errors and thereby govern die shape modification to improve the dimensional accuracy of the component. However, this dependency on process simulation could raise significant problems and present a major drawback if the finite element simulation results were inaccurate. This paper presents a novel approach to assess the dimensional accuracy and shape quality of aeroengine blades formed from finite element hot-forging simulation. The proposed virtual inspection system uses conventional algorithms adopted by modern coordinate measurement processes as well as the latest free-form surface evaluation techniques to provide a robust framework for virtual forging error assessment. Established techniques for the physical registration of real components have been adapted to localise virtual models in relation to a nominal Design Coordinate System. Blades are then automatically analysed using a series of intelligent routines to generate measurement data and compute dimensional errors. The results of a comparison study indicate that the virtual inspection results and actual coordinate measurement data are highly comparable, validating the approach as an effective and accurate means to quantify forging error in a virtual environment. Consequently, this provides adequate justification for the implementation of the virtual inspection system in the virtual process design, modelling and validation of forged aeroengine blades in industry.

An automated hybrid procedure for capturing mode-jumping in postbuckling composite stiffened structures

This paper presents a robust finite element procedure for modelling the behaviour of postbuckling structures undergoing mode-jumping. Current non-linear implicit finite element solution schemes, found in most finite element codes, are discussed and their shortcomings highlighted. A more effective strategy is presented which combines a quasi-static and a pseudo-transient routine for modelling this behaviour. The switching between these two schemes is fully automated and therefore eliminates the need for user intervention during the solution process. The quasi-static response is modelled using the are-length constraint while the pseudo-transient routine uses a modified explicit dynamic routine, which is more computationally efficient than standard implicit and explicit dynamic schemes. The strategies for switching between the quasi-static and pseudo-transient routines are presented

The marginal willingness-to-pay for attributes of a hypothetical HIV vaccine

This paper estimates the marginal willingness-to-pay for attributes of a hypothetical HIV vaccine using discrete choice modeling. We use primary data from 326 respondents from Bangkok and Chiang Mai, Thailand, in 2008–2009, selected using purposive, venue-based sampling across two strata. Participants completed a structured questionnaire and full rank discrete choice modeling task administered using computer-assisted personal interviewing. The choice experiment was used to rank eight hypothetical HIV vaccine scenarios, with each scenario comprising seven attributes (including cost) each of which had two levels. The data were analyzed in two alternative specifications: (1) best-worst; and (2) full-rank, using logit likelihood functions estimated with custom routines in Gauss matrix programming language. In the full-rank specification, all vaccine attributes are significant predictors of probability of vaccine choice. The biomedical attributes of the hypothetical HIV vaccine (efficacy, absence of VISP, absence of side effects, and duration of effect) are the most important attributes for HIV vaccine choice. On average respondents are more than twice as likely to accept a vaccine with 99% efficacy, than a vaccine with 50% efficacy. This translates to a willingness to pay US$383 more for a high efficacy vaccine compared with the low efficacy vaccine. Knowledge of the relative importance of determinants of HIV vaccine acceptability is important to ensure the success of future vaccination programs. Future acceptability studies of hypothetical HIV vaccines should use more finely grained biomedical attributes, and could also improve the external validity of results by including more levels of the cost attribute.

PLUMED 2: New feathers for an old bird

Enhancing sampling and analyzing simulations are central issues in molecular simulation. Recently, we introduced PLUMED, an open-source plug-in that provides some of the most popular molecular dynamics (MD) codes with implementations of a variety of different enhanced sampling algorithms and collective variables (CVs). The rapid changes in this field, in particular new directions in enhanced sampling and dimensionality reduction together with new hardware, require a code that is more flexible and more efficient. We therefore present PLUMED 2 here a,complete rewrite of the code in an object-oriented programming language (C++). This new version introduces greater flexibility and greater modularity, which both extends its core capabilities and makes it far easier to add new methods and CVs. It also has a simpler interface with the MD engines and provides a single software library containing both tools and core facilities. Ultimately, the new code better serves the ever-growing community of users and contributors in coping with the new challenges arising in the field.

Program summary

Program title: PLUMED 2

Catalogue identifier: AEEE_v2_0

Program summary URL: http://cpc.cs.qub.ac.uk/summaries/AEEE_v2_0.html

Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland

Licensing provisions: Yes

No. of lines in distributed program, including test data, etc.: 700646

No. of bytes in distributed program, including test data, etc.: 6618136

Distribution format: tar.gz

Programming language: ANSI-C++.

Computer: Any computer capable of running an executable produced by a C++ compiler.

Operating system: Linux operating system, Unix OSs.

Has the code been vectorized or parallelized?: Yes, parallelized using MPI.

RAM: Depends on the number of atoms, the method chosen and the collective variables used.

Classification: 3, 7.7, 23. Catalogue identifier of previous version: AEEE_v1_0.

Journal reference of previous version: Comput. Phys. Comm. 180 (2009) 1961.

External routines: GNU libmatheval, Lapack, Bias, MPI. (C) 2013 Elsevier B.V. All rights reserved.

The relationship between specific cognitive impairment and behaviour in Prader-Willi syndrome

Background

Individuals with Prader-Willi syndrome (PWS) have been shown to demonstrate a particular cognitive deficit in attention switching and high levels of preference for routine and temper outbursts. This study assesses whether a specific pathway between a cognitive deficit and behaviour via environmental interaction can exist in individuals with PWS.

Methods

Four individuals with PWS participated in a series of three single-case experiments including laboratory-based and natural environment designs. Cognitive (computer-based) challenges placed varying demands on attention switching or controlled for the cognitive demands of the tasks while placing no demands on switching. Unexpected changes to routines or expectations were presented in controlled games, or imposed on participants' natural environments and compared with control conditions during which no unexpected changes occurred. Behaviour was observed and heart rate was measured.

Results

Participants showed significantly increased temper outburst related behaviours during cognitive challenges that placed demands on attention switching, relative to the control cognitive challenges. Participants showed significantly increased temper outburst related behaviours when unexpected changes occurred in an experimental or the natural environment compared with when no changes occurred.

Conclusions

Difficult behaviours that could be triggered reliably in an individual by a specific cognitive demand could also be triggered via manipulation of the environment. Results suggest that a directional relationship between a specific cognitive deficit and behaviour, via environmental interaction, can exist in individuals with PWS.

SIMLA: Simulating particle dynamics in intense laser and other electromagnetic fields via classical and quantum electrodynamics

We present the Fortran program SIMLA, which is designed for the study of charged particle dynamics in laser and other background fields. The dynamics can be determined classically via the Lorentz force and Landau–Lifshitz equations or, alternatively, via the simulation of photon emission events determined by strong-field quantum-electrodynamics amplitudes and implemented using Monte-Carlo routines. Multiple background fields can be included in the simulation and, where applicable, the propagation direction, field type (plane wave, focussed paraxial, constant crossed, or constant magnetic), and time envelope of each can be independently specified.

Network Connectivity Proxy: Architecture, Implementation, and Performance Analysis

Several studies in the last decade have pointed out that many devices, such as computers, are often left powered on even when idle, just to make them available and reachable on the network, leading to large energy waste. The concept of network connectivity proxy (NCP) has been proposed as an effective means to improve energy efficiency. It impersonates the presence of networked devices that are temporally unavailable, by carrying out background networking routines on their behalf. Hence, idle devices could be put into low-power states and save energy. Several architectural alternatives and the applicability of this concept to different protocols and applications have been investigated. However, there is no clear understanding of the limitations and issues of this approach in current networking scenarios. This paper extends the knowledge about the NCP by defining an extended set of tasks that the NCP can carry out, by introducing a suitable communication interface to control NCP operation, and by designing, implementing, and evaluating a functional prototype.

Metallosupramolecular Materials for Electronic Applications: Molecular Boolean Computation

It is an exciting era for molecular computation because molecular logic gates are being pushed in new directions. The use of sulfur rather than the commonplace nitrogen as the key receptor atom in metal ion sensors is one of these directions; plant cells coming within the jurisdiction of fluorescent molecular thermometers is another, combining photochromism with voltammetry for molecular electronics is yet another. Two-input logic gates benefit from old ideas such as rectifying bilayer electrodes, cyclodextrin-enhanced room-temperature phosphorescence, steric hindrance, the polymerase chain reaction, charge transfer absorption of donor–acceptor complexes and lectin–glycocluster interactions. Furthermore, the concept of photo-uncaging enables rational ways of concatenating logic gates. Computational concepts are also applied to potential cancer theranostics and to the selective monitoring of neurotransmitters in situ. Higher numbers of inputs are also accommodated with the concept of functional integration of gates, where complex input–output patterns are sought out and analysed. Molecular emulation of computational components such as demultiplexers and parity generators/checkers are achieved in related ways. Complexity of another order is tackled with molecular edge detection routines.