Phenotypic diversity amongst strains of Pleurotus sajor-caju: implications for cultivation in and environments

In arid regions, biodiversity and biomass are limited by water availability, and this problem has been compounded by desertification associated with global climate change. The saprotrophic macrofungi that are indigenous to hot subtropical and tropical regions, such as Pleurotus spp., can play key roles in water sequestration, nutrient cycling, human nutrition, and bioremediation of waste materials. We studied 15 strains of Pleurotus sajor-caju, a widespread and phenotypically-diverse species, to establish variability in growth response and primordium development over a range of stress parameters: osmotic potential (-0.5 to -5 MPa), temperature (5-40 degrees C) and pH (2-12). The initiation of primordia precedes basidiome production and therefore represents a key stage in bioremediation strategies and fungi-driven nutrient cycles. Primordia were produced at low pH (4-6), at suboptimal growth temperatures (<or =25 degrees C), and under moderate water stress (-0.5 to -3.5 MPa). Although the growth windows for different strains were similar, their maximum growth rates and the optimum conditions for growth varied. We discuss the phenotypic diversity of Pleurotus strains and discuss their potential for cultivation, bioremediation and ecological regeneration.

Living to the range limit: consumer isotopic variation increases with environmental stress

Background: Theoretically, each species’ ecological niche is phylogenetically-determined and expressed spatially as the species’ range. However, environmental stress gradients may directly or indirectly decrease individual performance, such that the precise process delimiting a species range may not be revealed simply by studying abundance patterns. In the intertidal habitat the vertical ranges of marine species may be constrained by their abilities to tolerate thermal and desiccation stress, which may act directly or indirectly, the latter by limiting the availability of preferred trophic resources. Therefore, we expected individuals at greater shore heights to show greater variation in diet alongside lower indices of physiological condition.

Methods: We sampled the grazing gastropod Echinolittorina peruviana from the desert coastline of northern Chile at three shore heights, across eighteen regionally-representative shores. Stable isotope values (δ13C and δ15N) were extracted from E. peruviana and its putative food resources to estimate Bayesian ellipse area, carbon and nitrogen ranges and diet. Individual physiological condition was tracked by muscle % C and % N.

Results: There was an increase in isotopic variation at high shore levels, where E. peruviana’s preferred resource, tide-deposited particulate organic matter (POM), appeared to decrease in dietary contribution, and was expected to be less abundant. Both muscle % C and % N of individuals decreased with height on the shore.

Discussion: Individuals at higher stress levels appear to be less discriminating in diet, likely because of abiotic forcing, which decreases both consumer mobility and the availability of a preferred resource. Abiotic stress might be expected to increase trophic variation in other selective dietary generalist species. Where this coincides with a lower physiological condition, this may be a direct factor in setting their range limit.

Antioxidants and oxidative stress in BAL fluid of atopic asthmatic children

Earlier studies in adults have indicated that increased oxidative stress may occur in the blood and airways of asthmatic subjects. Therefore the aim of this study was to compare the concentrations of antioxidants and protein carbonyls in bronchoalveolar lavage fluid of clinically stable atopic asthmatic children (AA, n = 78) with our recently published reference intervals for nonasthmatic children (C, n = 124). Additionally, lipid peroxidation products (malondialdehyde) in bronchoalveolar lavage fluid and several antioxidants in plasma were determined. Bronchoalveolar lavage concentrations (median and interquartile range) of ascorbate [AA: 0.433 (0.294-0.678) versus C: 0.418 (0.253-0.646) micromol/L], urate [AA: 0.585 (0.412-0.996) versus C: 0.511 (0.372-0.687) micromol/L], alpha-tocopherol [AA: 0.025 (0.014-0.031) versus C: 0.017 (0.017-0.260) micromol/L], and oxidized proteins as reflected by protein carbonyls [AA: 1.222 (0.970-1.635) versus C: 1.243 (0.813-1.685) nmol/mg protein] were similar in both groups (p > 0.05 in all cases). The concentration of protein carbonyls correlated significantly with the number of eosinophils, mast cells, and macrophages in AA children only. Concentrations of oxidized proteins and lipid peroxidation products (malondialdehyde) correlated significantly in AA children (r = 0.614, n = 11, p = 0.044). Serum concentrations of ascorbate, urate, retinol, alpha-tocopherol, beta-carotene, and lycopene were similar in both groups whereas alpha-carotene was significantly reduced in asthmatics. Overall, increased bronchoalveolar lavage eosinophils indicate ongoing airway inflammation, which may increase oxidatively modified proteins as reflected by increased protein carbonyl concentrations.

Co-melt fluidised bed granulation of pharmaceutical powders: Improvements in drug bioavailability

This study investigates the use of co-melt fluidised bed granulation for the agglomeration of model pharmaceutical powders, namely, lactose mono-hydrate, PEG 10000, poly-vinyl pyrolidone and ibuprofen as a model drug. Granulation within the co-melt system was found to follow a nucleationâ??steady growthâ??coating regime profile. Using high molecular weight PEG binder, the granulation mechanism and thus the extent of granulation was found to be significantly influenced by binder viscosity. The compression properties of the granulate within the hot fluidised bed were correlated using a novel high temperature experimental procedure. It was found that the fracture stress and fractural modulus of the materials under hot processing conditions were orders of magnitude lower than those measured under ambient conditions. A range of particle velocities within the granulator were considered based on theoretical models. After an initial period of nucleation, the Stokes deformation number analysis indicated that only velocities within the high shear region of the fluidised bed were sufficient to promote significant granule deformation and therefore, coalescence. The data also indicated that larger granules de-fluidised preventing agglomeration by coalescence. Furthermore, experimental data indicated that dissipation of the viscous molten binder to the surface was the most important factor in the latter stages of the granulation process. From a pharmaceutical perspective the inclusion of the model drug, ibuprofen, combined with PVP in the co-melt process proved to be highly significant. It was found that using DSC analysis on the formulations that the decrease in the heat of fusion associated with the melting of ibuprofen within the FHMG systems may be attributed to interaction between PVP and ibuprofen through inter-molecular hydrogen bonding. This interaction decreases the crystallinity of ibuprofen and facilitates solubilisation and bioavailability within the solid matrix.

Complex weathering in drylands: implications of 'stress' history for rock debris breakdown and sediment release

Weathering studies have often sought to explain features in terms of a prevailing set of environmental conditions. However, it is clear that in most present-day hot desert regions, the surface rock debris has been exposed to a range of weathering environments and processes. These different weathering conditions can arise in two ways, either from the effects of long-term climate change acting on debris that remains relatively static within the landscape or through the spatial relocation of debris from high to low altitude. Consequently, each fragment of rock may contain a unique weathering-related legacy of damage and alteration — a legacy that may greatly influence its response to present-day weathering activity. Experiments are described in which blocks of limestone, sandstone, granite and basalt are given ‘stress histories’ by subjecting them to varying numbers of heating and freezing cycles as a form of pre-treatment. These imposed stress histories act as proxies for a weathering history. Some blocks were used in a laboratory salt weathering simulation study while others underwent a 2 year field exposure trial at high, mid and low altitude sites in Death Valley, California. Weight loss and ultrasonic pulse velocity measurements suggest that blocks with stress histories deteriorate more rapidly than unstressed samples of the same rock type exposed to the same environmental conditions. Laboratory data also indicate that the result of imposing a known ‘weathering history’ on samples by pre-stressing them is an increase in the amount of fine sediment released during salt weathering over a given period of time in comparison to unstressed samples.

Stress resistance and disease resistance in seaweeds: The role of reactive oxygen metabolism

It has become clear over the last 15-20 years that the immediate effect of a wide range of environmental stresses, and of infection, on vascular plants is to increase the formation of reactive oxygen species (ROS) and to impose oxidative stress on the cells. Since 1994, sufficient examples of similar responses in a broad range of marine macroalgae have been described to show that reactive oxygen metabolism also underlies the mechanisms by which seaweeds respond (and become resistant) to stress and infection. Desiccation, freezing, low temperatures, high light, ultraviolet radiation, and heavy metals all tend to result in a gradual and continued buildup of ROS because photosynthesis is inhibited and excess energy results in the formation of singlet oxygen. The response to other stresses (infection or oligosaccharides which signal that infection is occurring, mechanical stress, hyperosmotic shock) is quite different-a more rapid and intense, but short-lived production of ROS, described as an

The role played by a range of psychological variables in nurses’ handwashing behaviour

Background: Psychological models of behaviour change are used to predict patients’ health behaviours but have rarely been used to explore healthcare professionals’ health-related behaviour. Aim: To explore the association between self-reported handwashing and a range of psychological variables in a sample of nurses in a large acute hospital. Results and discussion: Nurses in this study were more likely to wash their hands if they perceived it to be important and if they thought their workplace helped them in doing so. The best predictor of perceived importance was how strongly a nurse believed that poor handwashing practice contributes to spreading infection. Conclusion: In this study, psychological variables such as perception of importance, perception of workplace support, occupational stress and perception of risk were important predictors of handwashing behaviour.

Detecting Positron-Atom Bound States through Resonant Annihilation

A method is proposed for detecting positron-atom bound states by observing enhanced positron annihilation due to electronic Feshbach resonances at electron-volt energies. The method is applicable to a range of open-shell transition-metal atoms which are likely to bind the positron: Fe, Co, Ni, Tc, Ru, Rh, Sn, Sb, Ta, W, Os, Ir, and Pt. Estimates of their binding energies are provided.

Systemic psychotherapy as an intervention for post-traumatic stress responses: an introduction, theoretical rationale and overview of developments in an emerging field of interest

The purpose of this article is to critically examine the literature to provide a rationale for including systemic family therapy (SFT) in the psycho-social treatment of people suffering the impact of post-traumatic stress (PTS). Attention is drawn to the relatively underdeveloped academic literature on PTS and the family. The impact of PTS is conceptualized within a psycho-social framework and the current evidence base for psycho-social interventions for PTS responses is described, highlighting the opportunity and need to undergird this area of daily practice. The impact of PTS on the family at multiple levels is identified, emphasizing its recursive nature. The case for SFT is articulated and a range of models of family intervention for PTS briefly reviewed, concluding with an emphasis on Walsh's key processes in family resilience as a framework for practice.

A review and psychometric evaluation of pregnancy-specific stress measures

Considerable evidence has accumulated on the association between pregnancy-specific stress and adverse birth outcomes with an increasing number of measures of pregnancy-specific stress being developed internationally. However, the introduction of these measures has not always been theoretically or psychometrically grounded, resulting in questions about the quality and direction of such research. This review summarizes evidence on the reliability and validity of pregnancy-specific stress measures identified between 1980 and October 2010. Fifteen pregnancy-specific stress measures were identified. Cronbach’s alpha coefficient ranged from 0.51–0.96 and predictive validity data on preterm birth were reported for five measures. Convergent validity data suggest that pregnancy-specific stress is related to, but distinct from, global stress. Findings from this review consolidate current knowledge on pregnancy-specific stress as a consistent predictor of premature birth. This review also advances awareness of the range of measures of pregnancy-specific stress and documents their strengths and limitations based on published reliability and validity data. Careful consideration needs to be given as to which measures to use in future research to maximize the development of stress theory in pregnancy and appropriate interventions for women who experience stress in pregnancy. An international, strategic collaboration is recommended to advance knowledge in this area of study.

Associations between maternal characteristics and pregnancy-related stress among low-risk mothers: An observational cross-sectional study

Background: Pregnancy is viewed as a major life event and, while the majority of healthy, low-risk women adapt well to pregnancy, there are those whose levels of stress are heightened by the experience.

Objectives: To determine the level of pregnancy-related stress experienced by a group of healthy, low-risk pregnant women and to relate the level of stress with a number of maternal characteristics.

Design: An observational cross-sectional study.

Setting: A large, urban maternity centre in Northern Ireland.

Participants: Of the 306 pregnant women who were invited to participate, 278 provided informed consent and were administered one self-complete questionnaire. Due to the withdrawal criteria, 15 questionnaires were removed from the analysis, resulting in a final sample of 263 healthy, low-risk pregnant women.

Methods: Levels of stress were measured using a self-report measure designed to assess specific worries and concerns relating to pregnancy. Maternal characteristics collected included age, marital status, social status, parity, obstetric history, perceived health status and 'wantedness' for the pregnancy. Regression analysis was undertaken using an ordinary linear regression model.

Results: The mean prenatal distress score in the sample was 15.1 (SD = 7.4; range 0-46). The regression model showed that women who had had previous pregnancies, with or without complications, had significantly lower mean prenatal distress scores than primiparous women (p < 0.01). Women reporting poorer physical health had higher mean prenatal distress scores than those who reported at least average health, while women aged 16-20 experienced a mean increase in the reported prenatal distress score (p < 0.05) in comparison to the reference group of 36 years and over.

Conclusions: This study brings to light the prevalence of pregnancy-related stress within a sample representative of healthy, low-risk women. Current antenatal care is ill-equipped to identify women suffering from high levels of stress; yet a growing body of research evidence links stress with adverse pregnancy outcomes. This study emphasises that healthy, low-risk women experience a range of pregnancy-related stress and identification of stress levels, either through the use of a simple stress measurement tool or through the associated factors identified within this research study, provides valuable data on maternal well-being. (C) 2010 Elsevier Ltd. All rights reserved.

Use of a lux-marked rhizobacterium as a biosensor to assess changes in rhizosphere C flow due to pollutant stress

The flow of carbon from plant roots into soil supports a range of microbial processes and is therefore critical to ecosystem function and health. Pollution-induced stress, which influences rhizosphere C flow is of considerable potential importance, and therefore needs to be evaluated. This paper reports on a method, based on reporter gene technology, for quantifying pollutant effects on rhizosphere C flow. The method uses the lux-marked rhizobacterium Pseudomonas fluorescens, where bioluminescence output of this biosensor is directly correlated with the metabolic activity and reports on C flow in root exudate. Plantago lanceolata was treated with paraquat (representing a model pollutant stress) in a simple microcosm system. The lux-biosensor response correlated closely with C concentrations in the exudate and demonstrated that the pollutant stress increased the C flow from the plantago roots, 24 h after application of the herbicide. The lux-reporter system therefore potentially offers a technique for use in assessing the impact of pollutant stress on rhizosphere C flow through the soil microbial biomass.

Stress, Positive Psychology and the National Student Survey

The aim was to explore the predictive ability of sources of stress and a range of dispositional and coping behaviours on student satisfaction and motivation. Most research exploring sources of stress and coping in students construes stress as psychological distress, with little attempt to consider positive experiences of stress. A questionnaire was administered to 120 first-year UK psychology students. Questions were asked which measured sources of stress when rated as likely to contribute to distress (a hassle) and likely to help one achieve (an uplift). The sources of stress were amended from the UK National Student Survey (NSS, 2011). Support, control, self-efficacy, personality and coping style were also measured, along with their potential affect on
course satisfaction, motivation and feeling part of a learning community. The sources of stress likely to lead to distress were more often significant than sources of stress likely to lead to positive, eustress states. Ironically,
factors one would consider would help students, such as the university support facilities, only did so when rated as a hassle, not as an uplift. Published university league tables draw heavily on student course satisfaction but this negatively correlated with intellectual motivation and feeling part of a learning
community. This suggests course satisfaction alone reveals an incomplete picture of the student experience. Course educators need to consider how course experiences contribute not just to potential distress but to
potential eustress. Teaching quality, effective support and work-life balance are key to student satisfaction and motivation. How educators interact with their students and the opportunities they create in and outside the class to promote peer support are likely to enhance satisfaction and motivation.

Stress processes in caring for an end-of-life family member:Application of a theoretical model

Objectives: Family caregivers play a vital role in maintaining the lives of individuals with advanced illness living in the community. However, the responsibility of caregiving for an end-of-life family member can have profound consequences on the psychological, physical and financial well-being of the caregiver. While the literature has identified caregiver stress or strain as a complex process with multiple contributing factors, few comprehensive studies exist. This study examined a wide range of theory-driven variables contributing to family caregiver stress. Method: Data variables from interviews with primary family caregivers were mapped onto the factors within the Stress Process Model theoretical framework. A hierarchical multiple linear regression analysis was used to determine the strongest predictors of caregiver strain as measured by a validated composite index, the Caregiver Strain Index. Results: The study included 132 family caregivers across south-central/western Ontario, Canada. About half of these caregivers experienced high strain, the extent of which was predicted by lower perceived program accessibility, lower functional social support, greater weekly amount of time caregivers committed to the care recipient, younger caregiver age and poorer caregiver self-perceived health. Conclusion: This study examined the influence of a multitude of factors in the Stress Process Model on family caregiver strain, finding stress to be a multidimensional construct. Perceived program accessibility was the strongest predictor of caregiver strain, more so than intensity of care, highlighting the importance of the availability of community resources to support the family caregiving role.

Constitutive model for localized Lüders-like stress-induced martensitic transformation and super-elastic behaviors of laser-welded NiTi wires

The application of the shape memory alloy NiTi in micro-electro-mechanical-systems (MEMSs) is extensive nowadays. In MEMS, complex while precise motion control is always vital. This makes the degradation of the functional properties of NiTi during cycling loading such as the appearance of residual strain become a serious problem to study, in particular for laser micro-welded NiTi in real applications. Although many experimental efforts have been put to study the mechanical properties of laser welded NiTi, surprisingly, up to the best of our understanding, there has not been attempts to quantitatively model the laser-welded NiTi under mechanical cycling in spite of the accurate prediction required in applications and the large number of constitutive models to quantify the thermo-mechanical behavior of shape memory alloys. As the first attempt to fill the gap, we employ a recent constitutive model, which describes the localized SIMT in NiTi under cyclic deformation; with suitable modifications to model the mechanical behavior of the laser welded NiTi under cyclic tension. The simulation of the model on a range of tensile cyclic deformation is consistent with the results of a series of experiments. From this, we conclude that the plastic deformation localized in the welded regions (WZ and HAZs) of the NiTi weldment can explain most of the extra amount of residual strain appearing in welded NiTi compared to the bare one. Meanwhile, contrary to common belief, we find that the ability of the weldment to memorize its transformation history, sometimes known as ‘return point memory’, still remains unchanged basically though the effective working limit of this ability reduces to within 6% deformation.