Simplified model for prediction of compressive strength of alkali-activated natural pozzolans

The assessment of pozzolanic activity is essential for estimating the reaction of a material as pozzolan. Natural pozzolans can be activated and condensed with sodium silicate in an alkaline environment to synthesize high performance cementitious construction materials with low environmental impact. In this paper, the pozzolanic activities of five natural pozzolans are studied. The correlation between type and chemical composition of natural pozzolan, which affects the formation of the geopolymer gel phase, both for the calcined and untreated natural pozzolans, have been reviewed. The improvement in pozzolanic properties was studied following heat treatment including calcinations and/or elevated curing temperature by using alkali solubility, and compressive strength tests. A model was developed to allow prediction of the alkali-activated pozzolan strength versus their chemical compositions, alkali solubility, and crystallinity.

Extended Energy Vector Prediction of Ambisonically Reproduced Image Direction at Off-Centre Listening Positions

This paper presents an extension to the energy vector, well known in the Ambisonics literature, to improve its predictions of localisation at off-centre listening positions. In determining the source direction, a perceptual weight is assigned to each loudspeaker gain, taking into account the relative arrival times, levels, and directions of the loudspeaker signals. The proposed model is evaluated alongside the original energy vector and two binaural models through comparison with the results of recent perceptual studies. The extended version was found to provide results that were at least 50% more accurate than the second best predictor for two experiments involving off-centre listeners with first- and third-order Ambisonics systems.

New Method for the Estimation of Viscosity of Pure and Mixtures of Ionic Liquids Based on the UNIFAC–VISCO Model

A modified UNIFAC–VISCO group contribution method was developed for the correlation and prediction of viscosity of ionic liquids as a function of temperature at 0.1 MPa. In this original approach, cations and anions were regarded as peculiar molecular groups. The significance of this approach comes from the ability to calculate the viscosity of mixtures of ionic liquids as well as pure ionic liquids. Binary interaction parameters for selected cations and anions were determined by fitting the experimental viscosity data available in literature for selected ionic liquids. The temperature dependence on the viscosity of the cations and anions were fitted to a Vogel–Fulcher–Tamman behavior. Binary interaction parameters and VFT type fitting parameters were then used to determine the viscosity of pure and mixtures of ionic liquids with different combinations of cations and anions to ensure the validity of the prediction method. Consequently, the viscosities of binary ionic liquid mixtures were then calculated by using this prediction method. In this work, the viscosity data of pure ionic liquids and of binary mixtures of ionic liquids are successfully calculated from 293.15 K to 363.15 K at 0.1 MPa. All calculated viscosity data showed excellent agreement with experimental data with a relative absolute average deviation lower than 1.7%.

Data-Driven Dynamic Prediction of Interrelated Heat and Electric Outputs of Microturbines

Microturbines are among the most successfully commercialized distributed energy resources, especially when they are used for combined heat and power generation. However, the interrelated thermal and electrical system dynamic behaviors have not been fully investigated. This is technically challenging due to the complex thermo-fluid-mechanical energy conversion processes which introduce multiple time-scale dynamics and strong nonlinearity into the analysis. To tackle this problem, this paper proposes a simplified model which can predict the coupled thermal and electric output dynamics of microturbines. Considering the time-scale difference of various dynamic processes occuring within microturbines, the electromechanical subsystem is treated as a fast quasi-linear process while the thermo-mechanical subsystem is treated as a slow process with high nonlinearity. A three-stage subspace identification method is utilized to capture the dominant dynamics and predict the electric power output. For the thermo-mechanical process, a radial basis function model trained by the particle swarm optimization method is employed to handle the strong nonlinear characteristics. Experimental tests on a Capstone C30 microturbine show that the proposed modeling method can well capture the system dynamics and produce a good prediction of the coupled thermal and electric outputs in various operating modes.

A Generalized Fuzzy Linguistic Model for Predicting Component Concentrations in an Optical Gas Sensing System

Motivated by environmental protection concerns, monitoring the flue gas of thermal power plant is now often mandatory due to the need to ensure that emission levels stay within safe limits. Optical based gas sensing systems are increasingly employed for this purpose, with regression techniques used to relate gas optical absorption spectra to the concentrations of specific gas components of interest (NOx, SO2 etc.). Accurately predicting gas concentrations from absorption spectra remains a challenging problem due to the presence of nonlinearities in the relationships and the high-dimensional and correlated nature of the spectral data. This article proposes a generalized fuzzy linguistic model (GFLM) to address this challenge. The GFLM is made up of a series of “If-Then” fuzzy rules. The absorption spectra are input variables in the rule antecedent. The rule consequent is a general nonlinear polynomial function of the absorption spectra. Model parameters are estimated using least squares and gradient descent optimization algorithms. The performance of GFLM is compared with other traditional prediction models, such as partial least squares, support vector machines, multilayer perceptron neural networks and radial basis function networks, for two real flue gas spectral datasets: one from a coal-fired power plant and one from a gas-fired power plant. The experimental results show that the generalized fuzzy linguistic model has good predictive ability, and is competitive with alternative approaches, while having the added advantage of providing an interpretable model.

Troponin I and cardiovascular risk prediction in the general population: the BiomarCaRE consortium

AIMS: Our aims were to evaluate the distribution of troponin I concentrations in population cohorts across Europe, to characterize the association with cardiovascular outcomes, to determine the predictive value beyond the variables used in the ESC SCORE, to test a potentially clinically relevant cut-off value, and to evaluate the improved eligibility for statin therapy based on elevated troponin I concentrations retrospectively.

METHODS AND RESULTS: Based on the Biomarkers for Cardiovascular Risk Assessment in Europe (BiomarCaRE) project, we analysed individual level data from 10 prospective population-based studies including 74 738 participants. We investigated the value of adding troponin I levels to conventional risk factors for prediction of cardiovascular disease by calculating measures of discrimination (C-index) and net reclassification improvement (NRI). We further tested the clinical implication of statin therapy based on troponin concentration in 12 956 individuals free of cardiovascular disease in the JUPITER study. Troponin I remained an independent predictor with a hazard ratio of 1.37 for cardiovascular mortality, 1.23 for cardiovascular disease, and 1.24 for total mortality. The addition of troponin I information to a prognostic model for cardiovascular death constructed of ESC SCORE variables increased the C-index discrimination measure by 0.007 and yielded an NRI of 0.048, whereas the addition to prognostic models for cardiovascular disease and total mortality led to lesser C-index discrimination and NRI increment. In individuals above 6 ng/L of troponin I, a concentration near the upper quintile in BiomarCaRE (5.9 ng/L) and JUPITER (5.8 ng/L), rosuvastatin therapy resulted in higher absolute risk reduction compared with individuals <6 ng/L of troponin I, whereas the relative risk reduction was similar.

CONCLUSION: In individuals free of cardiovascular disease, the addition of troponin I to variables of established risk score improves prediction of cardiovascular death and cardiovascular disease.

An energy based force prediction method for UD-CFRP orthogonal machining

The machining of carbon fiber reinforced polymer (CFRP) composite presents a significant challenge to the industry, and a better understanding of machining mechanism is the essential fundament to enhance the machining quality. In this study, a new energy based analytical method was developed to predict the cutting forces in orthogonal machining of unidirectional CFRP with fiber orientations ranging from 0° to 75°. The subsurface damage in cutting was also considered. Thus, the total specific energy for cutting has been estimated along with the energy consumed for forming new surfaces, friction, fracture in chip formation and subsurface debonding. Experiments were conducted to verify the validity of the proposed model.

Common polygenic variation enhances risk prediction for Alzheimer's disease.

The identification of subjects at high risk for Alzheimer’s disease is important for prognosis and early intervention. We investigated the polygenic architecture of Alzheimer’s disease and the accuracy of Alzheimer’s disease prediction models, including and excluding the polygenic component in the model. This study used genotype data from the powerful dataset comprising 17 008 cases and 37 154 controls obtained from the International Genomics of Alzheimer’s Project (IGAP). Polygenic score analysis tested whether the alleles identified to associate with disease in one sample set were significantly enriched in the cases relative to the controls in an independent sample. The disease prediction accuracy was investigated in a subset of the IGAP data, a sample of 3049 cases and 1554 controls (for whom APOE genotype data were available) by means of sensitivity, specificity, area under the receiver operating characteristic curve (AUC) and positive and negative predictive values. We observed significant evidence for a polygenic component enriched in Alzheimer’s disease (P = 4.9 × 10−26). This enrichment remained significant after APOE and other genome-wide associated regions were excluded (P = 3.4 × 10−19). The best prediction accuracy AUC = 78.2% (95% confidence interval 77–80%) was achieved by a logistic regression model with APOE, the polygenic score, sex and age as predictors. In conclusion, Alzheimer’s disease has a significant polygenic component, which has predictive utility for Alzheimer’s disease risk and could be a valuable research tool complementing experimental designs, including preventative clinical trials, stem cell selection and high/low risk clinical studies. In modelling a range of sample disease prevalences, we found that polygenic scores almost doubles case prediction from chance with increased prediction at polygenic extremes.

Model reduction for nonlinear aeroelasticity using the Discrete Empirical Interpolation Method

A novel surrogate model is proposed in lieu of computational fluid dynamic (CFD) code for fast nonlinear aerodynamic modeling. First, a nonlinear function is identified on selected interpolation points defined by discrete empirical interpolation method (DEIM). The flow field is then reconstructed by a least square approximation of flow modes extracted by proper orthogonal decomposition (POD). The proposed model is applied in the prediction of limit cycle oscillation for a plunge/pitch airfoil and a delta wing with linear structural model, results are validate against a time accurate CFD-FEM code. The results show the model is able to replicate the aerodynamic forces and flow fields with sufficient accuracy while requiring a fraction of CFD cost.

The influence of socio-demographic, psychological and knowledge-related variables alongside perceived cooking and food skills abilities in the prediction of diet quality in adults: a nationally representative cross-sectional study

Background: Interventions to increase cooking skills (CS) and food skills (FS) as a route to improving overall diet are popular within public health. This study tested a comprehensive model of diet quality by assessing the influence of socio-demographic, knowledge- and psychological-related variables alongside perceived CS and FS abilities. The correspondence of two measures of diet quality further validated the Eating Choices Index (ECI) for use in quantitative research.
Methods: A cross-sectional survey was conducted in a quota-controlled nationally representative sample of 1049 adults aged 20–60 years drawn from the Island of Ireland. Surveys were administered in participants’ homes via computer-assisted personal interviewing (CAPI) assessing a range of socio-demographic, knowledge- and psychological-related variables alongside perceived CS and FS abilities. Regression models were used to model factors influencing diet quality. Correspondence between 2 measures of diet quality was assessed using chi-square and Pearson correlations.
Results: ECI score was significantly negatively correlated with DINE Fat intake (r = -0.24, p < 0.001), and ECI score was significantly positively correlated with DINE Fibre intake (r = 0.38, p < 0.001), demonstrating a high agreement. Findings indicated that males, younger respondents and those with no/few educational qualifications scored significantly lower on both CS and FS abilities. The relative influence of socio-demographic, knowledge, psychological variables and CS and FS abilities on dietary outcomes varied, with regression models explaining 10–20 % of diet quality variance. CS ability exerted the strongest relationship with saturated fat intake (β = -0.296, p < 0.001) and was a significant predictor of fibre intake (β = -0.113, p < 0.05), although not for healthy food choices (ECI) (β = 0.04, p > 0.05).
Conclusion: Greater CS and FS abilities may not lead directly to healthier dietary choices given the myriad of other factors implicated; however, CS appear to have differential influences on aspects of the diet, most notably in relation to lowering saturated fat intake. Findings suggest that CS and FS should not be singular targets of interventions designed to improve diet; but targeting specific sub-groups of the population e.g. males, younger adults, those with limited education might be more fruitful. A greater understanding of the interaction of factors influencing cooking and food practices within the home is needed.

Assessment of turbulence model predictions for a centrifugal compressor simulation

Steady-state computational fluid dynamics (CFD) simulations are an essential tool in the design process of centrifugal compressors. Whilst global parameters, such as pressure ratio and efficiency, can be predicted with reasonable accuracy, the accurate prediction of detailed compressor flow fields is a much more significant challenge. Much of the inaccuracy is associated with the incorrect selection of turbulence model. The need for a quick turnaround in simulations during the design optimisation process, also demands that the turbulence model selected be robust and numerically stable with short simulation times.
In order to assess the accuracy of a number of turbulence model predictions, the current study used an exemplar open CFD test case, the centrifugal compressor ‘Radiver’, to compare the results of three eddy viscosity models and two Reynolds stress type models. The turbulence models investigated in this study were (i) Spalart-Allmaras (SA) model, (ii) the Shear Stress Transport (SST) model, (iii) a modification to the SST model denoted the SST-curvature correction (SST-CC), (iv) Reynolds stress model of Speziale, Sarkar and Gatski (RSM-SSG), and (v) the turbulence frequency formulated Reynolds stress model (RSM-ω). Each was found to be in good agreement with the experiments (below 2% discrepancy), with respect to total-to-total parameters at three different operating conditions. However, for the off-design conditions, local flow field differences were observed between the models, with the SA model showing particularly poor prediction of local flow structures. The SST-CC showed better prediction of curved rotating flows in the impeller. The RSM-ω was better for the wake and separated flow in the diffuser. The SST model showed reasonably stable, robust and time efficient capability to predict global and local flow features.

A generalized fuzzy linguistic model for predicting component concentrations in an optical gas sensing system

Motivated by environmental protection concerns, monitoring the flue gas of thermal power plant is now often mandatory due to the need to ensure that emission levels stay within safe limits. Optical based gas sensing systems are increasingly employed for this purpose, with regression techniques used to relate gas optical absorption spectra to the concentrations of specific gas components of interest (NO_x, SO₂ etc.). Accurately predicting gas concentrations from absorption spectra remains a challenging problem due to the presence of nonlinearities in the relationships and the high-dimensional and correlated nature of the spectral data. This article proposes a generalized fuzzy linguistic model (GFLM) to address this challenge. The GFLM is made up of a series of “If-Then” fuzzy rules. The absorption spectra are input variables in the rule antecedent. The rule consequent is a general nonlinear polynomial function of the absorption spectra. Model parameters are estimated using least squares and gradient descent optimization algorithms. The performance of GFLM is compared with other traditional prediction models, such as partial least squares, support vector machines, multilayer perceptron neural networks and radial basis function networks, for two real flue gas spectral datasets: one from a coal-fired power plant and one from a gas-fired power plant. The experimental results show that the generalized fuzzy linguistic model has good predictive ability, and is competitive with alternative approaches, while having the added advantage of providing an interpretable model.