So Why Did the Guns Fall Silent? How Interplay, not Stalemate, Explains the Northern Ireland Peace Process

The precise rationale for, and timing of, the Northern Ireland peace process of the 1990s and beyond, which developed after more than two decades of conflict, has yet to be fully explained. It has been a common assumption that it arose from a stalemate involving the Irish Republican Army (IRA), the 'regular' pro-state forces of the British Army and Royal Ulster Constabulary and the 'irregular/ultra' pro-state loyalist paramilitary groups of the Ulster Volunteer Force (UVF) and Ulster Defence Association (UDA). Under this interpretation, military/paramilitary deadlock led to ripeness for peace, amid reappraisals by all parties to the conflict of the utility of violence accompanied by reinterpretations of earlier political orthodoxies. The IRA could not remove the British sovereign claim to Northern Ireland; British forces could not militarily defeat the IRA and loyalists and republicans were engaged in a futile inter-communal sectarian war. This stalemate thesis has obvious attraction in explaining why a seemingly intractable war finally subsided, but is less convincing when subject to empirical testing among republican and loyalist participants in the conflict. This article moves away from 'top-down' generalist narratives of the onset of peace, which tend to argue the stalemate thesis, to assess 'bottom-up' interpretations from the actual combatants as to why they ceased fighting. It suggests an asymmetry, rather than mutuality, of perception that there was 'military' cessation by the armed non-state groups, with neither republican nor loyalist interpretations grounded in notions of stalemate. The article concludes by urging a wider consideration of the important and persistent interplay of the military and political in conflicts such as Northern Ireland.

Examination of the flow rheological and textural properties of polymer gels composed of poly(methylvinylether-co-maleic anhydride) and poly(vinylpyrrolidone): rheological and mathematical interpretation of textural parameters.

The purpose of this study was to mathematically characterize the effects of defined experimental parameters (probe speed and the ratio of the probe diameter to the diameter of sample container) on the textural/mechanical properties of model gel systems. In addition, this study examined the applicability of dimensional analysis for the rheological interpretation of textural data in terms of shear stress and rate of shear. Aqueous gels (pH 7) were prepared containing 15% w/w poly(methylvinylether-co-maleic anhydride) and poly(vinylpyrrolidone) (PVP) (0, 3, 6, or 9% w/w). Texture profile analysis (TPA) was performed using a Stable Micro Systems texture analyzer (model TA-XT 2; Surrey, UK) in which an analytical probe was twice compressed into each formulation to a defined depth (15 mm) and at defined rates (1, 3, 5, 8, and 10 mm s-1), allowing a delay period (15 s) between the end of the first and beginning of the second compressions. Flow rheograms were performed using a Carri-Med CSL2-100 rheometer (TA Instruments, Surrey, UK) with parallel plate geometry under controlled shearing stresses at 20.0°?±?0.1°C. All formulations exhibited pseudoplastic flow with no thixotropy. Increasing concentrations of PVP significantly increased formulation hardness, compressibility, adhesiveness, and consistency. Increased hardness, compressibility, and consistency were ascribed to enhanced polymeric entanglements, thereby increasing the resistance to deformation. Increasing probe speed increased formulation hardness in a linear manner, because of the effects of probe speed on probe displacement and surface area. The relationship between formulation hardness and probe displacement was linear and was dependent on probe speed. Furthermore, the proportionality constant (gel strength) increased as a function of PVP concentration. The relationship between formulation hardness and diameter ratio was biphasic and was statistically defined by two linear relationships relating to diameter ratios from 0 to 0.4 and from 0.4 to 0.563. The dramatically increased hardness, associated with diameter ratios in excess of 0.4, was accredited to boundary effects, that is, the effect of the container wall on product flow. Using dimensional analysis, the hardness and probe displacement in TPA were mathematically transformed into corresponding rheological parameters, namely shearing stress and rate of shear, thereby allowing the application of the power law (??=?k?n) to textural data. Importantly, the consistencies (k) of the formulations, calculated using transformed textural data, were statistically similar to those obtained using flow rheometry. In conclusion, this study has, firstly, characterized the relationships between textural data and two key instrumental parameters in TPA and, secondly, described a method by which rheological information may be derived using this technique. This will enable a greater application of TPA for the rheological characterization of pharmaceutical gels and, in addition, will enable efficient interpretation of textural data under different experimental parameters.

Measurement and interpretation of the mid-infrared properties of single crystal and polycrystalline gold

The contribution of electron-phonon scattering and grain boundary scattering to the mid-IR (lambda = 3.392 mum) properties of An has been assessed by examining both bulk, single crystal samples-Au(1 1 1) and Au(1 1 0)-and thin film, polycrystalline An samples at 300 K and 100 K by means of surface plasmon polariton excitation. The investigation constitutes a stringent test for the in-vacuo Otto-configuration prism coupler used to perform the measurements, illustrating its strengths and limitations. Analysis of the optical response is guided by a physically based interpretation of the Drude model. Relative to the reference case of single crystal Au at 100 K (epsilon = - 568 + i17.5), raising the temperature to 300 K causes increased electron-phonon scattering that accounts for a reduction of similar to40 nm in the electron mean free path. Comparison of a polycrystalline sample to the reference case determines a mean free path due to grain boundary scattering of similar to 17 nm, corresponding to about half the mean grain size as determined from atomic force microscopy and indicating a high reflectance coefficient for the An grain boundaries. An analysis combining consideration of grain boundary scattering and the inclusion of a small percentage of voids in the polycrystalline film by means of an effective medium model indicates a value for the grain boundary reflection coefficient in the range 0.55-0.71. (C) 2005 Elsevier B.V. All rights reserved.

Electrode field penetration: A new interpretation of tunneling currents in barium strontium titanate (BST) thin films

This paper shows that penetration of the applied electric field into the electrodes of a ferroelectric thin film capacitor produces both an interfacial capacitance and an effective mechanism for electron tunneling. The model predictions are compared with experimental results on Au-BST-SrRuO3 capacitors of varying thicknesses, and the agreement is excellent.

Resolution of an ancient surface science anomaly: Work function change induced by N adsorption on W{100}

For many decades it has been assumed that an adsorbate centered above a metal surface and with a net negative charge should increase the work function of the surface. However, despite their electronegativity, N adatoms on W{100} cause a significant work function decrease. Here we present a resolution of this anomaly. Using density functional theory, we demonstrate that while the N atom carries a negative charge, of overriding importance is a reduction in the surface overspill electron density into the vacuum, when that charge is engaged in bonding to the adatom. This novel interpretation is fundamentally important in the general understanding of work function changes induced by atomic adsorbates.

An absorptive capacity interpretation of Six Sigma

Purpose – The Six Sigma approach to business improvement has emerged as a phenomenon in both the practitioner and academic literature with potential for achieving increased competitiveness and contributing. However, there is a lack of critical reviews covering both theory and practice. Therefore, the purpose of this paper is to critically review the literature of Six Sigma using a consistent theoretical perspective, namely absorptive capacity.

Design/methodology/approach – The literature from peer-reviewed journals has been critically reviewed using the absorptive capacity framework and dimensions of acquisition, assimilation, transformation, and exploitation.

Findings – There is evidence of emerging theoretical underpinning in relation to Six Sigma borrowing from an eclectic range of organisational theories. However, this theoretical development lags behind practice in the area. The development of Six Sigma in practice is expanding mainly through more rigorous studies and applications in service-based environments (profit and not for profit). The absorptive capacity framework is found to be a useful overarching framework within which to situate existing theoretical and practice studies.

Research limitations/implications – Agendas for further research from the critical review, in relation to both theory and practice, have been established in relation to each dimension of the absorptive capacity framework.

Practical implications – The paper shows that Six Sigma is both a strategic and operational issue and that focussing solely on define, measure, analyse, improve control-based projects can limit the strategic effectiveness of the approach within organisations.

Originality/value – Despite the increasing volume of Six Sigma literature and organisational applications, there is a paucity of critical reviews which cover both theory and practice and which suggest research agendas derived from such reviews.

Light emission from gold and silver thin films in a scanning tunneling microscope: role of contamination and interpretation of grain structure in photon maps

Scanning tunnelling microscope (STM) tip-induced light emission from Au and Ag has been studied. Thin film samples similar to100nm thick were prepared by thermal evaporation at 0.5nm/s onto a room-temperature glass substrate to produce grains of 20-50nm in lateral dimension at the surface. Light emission from the samples in the STM was quasi-simultaneously recorded with the topography, at 1.8V tip bias and 3-40nA current, alternating pixel by pixel at the same bias. Typically, a surface scan range of 150 nm x 150 nm was surveyed. Au, W and PtIr tips were used.

Nonconservative current-induced forces: A physical interpretation

We give a physical interpretation of the recently demonstrated non-conservative nature of interatomic forces in current-carrying nanostructures. We start from the analytical expression for the curl of these forces, and evaluate it for a point defect in a current-carrying system. We obtain a general definition of the capacity of electrical current flow to exert a non-conservative force, and thus do net work around closed paths, by a formal non-invasive test procedure. Second, we show that the gain in atomic kinetic energy in time, generated by non-conservative current-induced forces, is equivalent to the uncompensated stimulated emission of directional phonons. This connection with electron-phonon interactions quantifies explicitly the intuitive notion that non-conservative forces work by angular momentum transfer.

Human Dignity and judicial Interpretation of Human Rights

The Universal Declaration on Human Rights was pivotal in popularizing the use of 'dignity' or 'human dignity' in human rights discourse. This article argues that the use of 'dignity', beyond a basic minimum core, does not provide a universalistic, principled basis for judicial decision-making in the human rights context, in the sense that there is little common understanding of what dignity requires substantively within or across jurisdictions. The meaning of dignity is therefore context-specific, varying significantly from jurisdiction to jurisdiction and (often) over time within particular jurisdictions. Indeed, instead of providing a basis for principled decision-making, dignity seems open to significant judicial manipulation. increasing rather than decreasing judicial discretion. That is one of its significant attractions to both judges and litigators alike. Dignity provides a convenient language for the adoption of substantive interpretations of human rights guarantees which appear to be intentionally, not just coincidentally. highly contingent on local circumstances. Despite that, however, I argue that the concept of 'human dignity' plays an important role in the development of human rights adjudication, not in providing an agreed content to human rights but in contributing to particular methods of human rights interpretation and adjudication.

Regenerative Medicine and New Labour Life Science Policy: Rhetorics of Success, Narratives of Sustainability and Survival

Advances in stem cell science and tissue engineering are being turned into applications and products through a novel medical paradigm known as regenerative medicine. This paper begins by examining the vulnerabilities and risks encountered by the regenerative medicine industry during a pivotal moment in its scientific infancy: the 2000s. Under the auspices of New Labour, British medical scientists and life science innovation firms associated with regenerative medicine, received demonstrative rhetorical pledges of support, aligned with the publication of a number of government initiated reports presaged by Bioscience 2015: Improving National Health, Increasing National Wealth. The Department of Health and the Department of Trade and Industry (and its successors) held industry consultations to determine the best means by which innovative bioscience cultures might be promoted and sustained in Britain. Bioscience 2015 encapsulates the first chapter of this sustainability narrative. By 2009, the tone of this storyline had changed to one of survivability. In the second part of the paper, we explore the ministerial interpretation of the ‘bioscience discussion cycle’ that embodies this narrative of expectation, using a computer-aided content analysis programme. Our analysis notes that the ministerial interpretation of these reports has continued to place key emphasis upon the distinctive and exceptional characteristics of the life science industries, such as their ability to perpetuate innovations in regenerative medicine and the optimism this portends – even though many of the economic expectations associated with this industry have remained unfulfilled.

Comparison of consumer perception and acceptability for steaks cooked to different endpoints: Validation of photographic approach

Photographs have been used to enhance consumer reporting of preference of meat doneness, however, the use of photographs has not been validated for this purpose. This study used standard cooking methods to produce steaks of five different degrees of doneness (rare medium, medium well, well done and very well done) to study the consumer’s perception of doneness, from both the external and internal surface of the cooked steak and also from corresponding photographs of each sample. Consumers evaluated each surface of the cooked steaks in relation to doneness for acceptability, ‘just about right’ and perception of doneness. Data were analysed using a split plot ANOVA and least significant test. Perception scores (for both external and internal surfaces) between different presentation methods (steak samples and corresponding photos), were not significantly different (p > 0.05). The result indicates that photographs can be used as a valid approach for assessing preference for meat doneness.

Source as a controlling factor on the quality and interpretation of sediment magnetic records from the northern North Atlantic

Magnetic properties of eight particle size ranges from nine locations in Iceland and 26 locations in southern Greenland reveal the importance of source variation for our understanding of paleomagnetic and environmental magnetic records in the marine environment. These terrestrial samples show varying degrees of particle size dependence with all samples showing that the silt fraction possesses greater concentrations of ferrimagnetic minerals than either clay or sand. Fine pseudo-single domain (PSD) size magnetic grains dominate the magnetic assemblage of all Icelandic fractions. In contrast, Greenlandic samples possess greater variation in magnetic grain size; only fine silt and clay are as magnetically fine as the Icelandic PSD grains, while Greenlandic silts and sands are dominated by coarser PSD and multi-domain grains. These observations from potential marine sediment sources suggest that the silt size fraction is a likely driver for much of the concentration-dependent parameters derived from bulk magnetic records and that the magnetic grain size of the silt fraction can be used to discriminate between Icelandic and Greenlandic sources. Using these results to examine magnetic grain size records from marine sediment cores collected across the northern North Atlantic suggests that source, not just transport-controlled physical grain-size, has a significant impact on determining the magnetic grain size at a particular location. Homogeneity of magnetic grain size in Icelandic sediments at least partially explains the consistent quality of paleomagnetic records derived from cores surrounding Iceland and their ability to buffer large environmental changes. © 2013 Elsevier B.V.

The Science of a Lost Medieval Graveyard: The Ballyhanna Research Project

he Science of Lost Medieval Gaelic Graveyard tells the story of the discovery in 2003 of a graveyard and the foundations of a small forgotten stone church at Ballyhanna, in Ballyshannon, Co. Donegal, as part of the N15 Bundoran–Ballyshannon Bypass archaeological works. This led to the excavation of one of the largest collections of medieval burials ever undertaken on this island. Over 1,200 individuals were excavated from the site at Ballyhanna during the winter of 2003–4, representing 1,000 years of burial through the entire Irish medieval period. The discovery led to the establishment of a cross-border research collaboration—the Ballyhanna Research Project—between Queen’s University Belfast and the Institute of Technology, Sligo, which has brought to life this lost Gaelic graveyard.

This book shows how cutting-edge scientific research may aid our understanding and interpretation of archaeology and reveal new insights into past societies. For example, the use of ancient DNA analysis represented the first biomolecular archaeological evaluation of a medieval population to date and provided evidence that cystic fibrosis was much less prevalent in the medieval period than today. The Science of Lost Medieval Gaelic Graveyard is about a community who lived in Gaelic Ireland, about their lifestyles, health and diet. It tells us of their deaths and of their burial traditions, and through examining all of these aspects, it reveals the ebb and flow of their lives.

The book is accompanied by a CD-ROM which includes supplementary information from the Ballyhanna Research Project and the original excavation and survey reports for all of the archaeological sites on the N15 Bundoran–Ballyshannon Bypass.