53 resultados para Paper industry workers
Resumo:
Recovery of cellulose fibres from paper mill effluent has been studied using common polysaccharides or biopolymers such as Guar gum, Xanthan gum and Locust bean gum as flocculent. Guar gum is commonly used in sizing paper and routinely used in paper making. The results have been compared with the performance of alum, which is a common coagulant and a key ingredient of the paper industry. Guar gum recovered about 3.86 mg/L of fibre and was most effective among the biopolymers. Settling velocity distribution curves demonstrated that Guar gum was able to settle the fibres faster than the other biopolymers; however, alum displayed the highest particle removal rate than all the biopolymers at any of the settling velocities. Alum, Guar gum, Xanthan gum and Locust bean gum removed 97.46%, 94.68%, 92.39% and 92.46% turbidity of raw effluent at a settling velocity of 0.5 cm/min, respectively. The conditions for obtaining the lowest sludge volume index such as pH, dose and mixing speed were optimised for guar gum which was the most effective among the biopolymers. Response surface methodology was used to design all experiments, and an optimum operational setting was proposed. The test results indicate similar performance of alum and Guar gum in terms of floc settling velocities and sludge volume index. Since Guar gum is a plant derived natural substance, it is environmentally benign and offers a green treatment option to the paper mills for pulp recycling.
Resumo:
Despite concern about the harmful effects of substances contained in various
plastic consumer products, little attention has focused on the more heavily
exposed women working in the plastics industry. Through a review of the
toxicology, industrial hygiene, and epidemiology literatures in conjunction
with qualitative research, this article explores occupational exposures in producing
plastics and health risks to workers, particularly women, who make up
a large part of the workforce. The review demonstrates that workers are
exposed to chemicals that have been identified as mammary carcinogens and
endocrine disrupting chemicals, and that the work environment is heavily
contaminated with dust and fumes. Consequently, plastics workers have a
body burden that far exceeds that found in the general public.
Resumo:
Knowledge on the life span of the riveting dies used in the automotive industry is sparse. It is often the case that only when faulty products are produced are workers aware that their tool needs to be changed. This is of course costly both in terms of time and money. Responding to this challenge, this paper proposes a methodology which integrates wear and stress analysis to quantify the life of a riveting die. Experiments are carried out to measure the applied load required to split a rivet. The obtained results (i.e. force curves) are used to validate the wear mechanisms of the die observed using scanning electron microscopy. Sliding, impact, and adhesive wears are observed on the riveting die after a certain number of riveting cycles. The stress distribution on the die during riveting is simulated using a finite element (FE) approach. In order to confirm the accuracy of the FE model, the experimental force results are compared with the ones produced from FE simulation. The maximum and minimum von Mises' stresses generated from the FE model are input into a Goodman diagram and an S-N curve to compute the life of the riveting die. It is found that the riveting die is predicted to run for 4 980 000 cycles before failure.
Resumo:
This paper examines the debate surrounding local versus international sourcing of retail products, particularly food and flowers, in light of the emerging carbon imperative. It begins by examining the Fairtrade market and then examines food miles and carbon impact. The complexity of sourcing decisions when considering both international development issues and the emerging carbon agenda is considered using the case of the cut flower industry
Resumo:
This paper investigates the use of supply chains as a source of knowledge transfer to manufacturing businesses in South Yorkshire and the effect this can have on improving economic performance. It also looks at where assistance originates from, what factors influence who gets the assistance, and what the benefits are.
Resumo:
This paper examines the routine practice of Approved Social Workers (ASWs) in adult mental health services in Northern Ireland. It begins with a review of existing literature on the ASW role before describing how a retrospective audit, using a mixed methods approach, was used to collect data on eighty-four assessments carried out to determine whether compulsory admission to hospital was needed. Respondents were also asked to consider how such assessments might be affected by proposed changes to the law in this field. The key findings highlighted a number of areas of practice that may be improved. There were inconsistencies in how the assessments were recorded and an uneven distribution of workloads across ASWs. Some problems were identified with interagency working and, in a quarter of the assessments, the ASW reported having felt afraid or at risk. The authors make a number of recommendations, which include: the use of a standard reporting procedure; that organisations should consider how to deliver a more even distribution of ASW workload; that protocols should be developed that ensure that ASWs are not left alone in potentially risky situations; and that joint assessments with General Practitioners should be required, rather than just recommended.
Resumo:
Increasingly, mental health social workers in the United Kingdom and elsewhere in the world are employing coercive interventions with clients. This paper explores this trend in the context of community-based settings, using national and international research literature on this subject. It begins with a discussion about the complex, contested nature of ideas on coercion. The authors then explore debates about how coercion is perceived and applied in practice. They choose two forms of coercion*/informal types of leverage, and the legally mandated use of Community Treatment Orders*/to highlight the range of ethical problems and dilemmas that confront practitioners in this field. The authors conclude by developing a tentative, explanatory model to explain how and why mental health social workers should consider a more holistic, situated approach to help deal with ethical concerns about the use of coercion.