Genome-wide association studies in oesophageal adenocarcinoma and Barrett's oesophagus: a large-scale meta-analysis

Background: Esophageal adenocarcinoma (EA) is one of the fastest rising cancers in western countries. Barrett’s Esophagus (BE) is the premalignant precursor of EA. However, only a subset of BE patients develop EA, which complicates the clinical management in the absence of valid predictors. Genetic risk factors for BE and EA are incompletely understood. This study aimed to identify novel genetic risk factors for BE and EA.Methods: Within an international consortium of groups involved in the genetics of BE/EA, we performed the first meta-analysis of all genome-wide association studies (GWAS) available, involving 6,167 BE patients, 4,112 EA patients, and 17,159 representative controls, all of European ancestry, genotyped on Illumina high-density SNP-arrays, collected from four separate studies within North America, Europe, and Australia. Meta-analysis was conducted using the fixed-effects inverse variance-weighting approach. We used the standard genome-wide significant threshold of 5×10-8 for this study. We also conducted an association analysis following reweighting of loci using an approach that investigates annotation enrichment among the genome-wide significant loci. The entire GWAS-data set was also analyzed using bioinformatics approaches including functional annotation databases as well as gene-based and pathway-based methods in order to identify pathophysiologically relevant cellular pathways.Findings: We identified eight new associated risk loci for BE and EA, within or near the CFTR (rs17451754, P=4·8×10-10), MSRA (rs17749155, P=5·2×10-10), BLK (rs10108511, P=2·1×10-9), KHDRBS2 (rs62423175, P=3·0×10-9), TPPP/CEP72 (rs9918259, P=3·2×10-9), TMOD1 (rs7852462, P=1·5×10-8), SATB2 (rs139606545, P=2·0×10-8), and HTR3C/ABCC5 genes (rs9823696, P=1·6×10-8). A further novel risk locus at LPA (rs12207195, posteriori probability=0·925) was identified after re-weighting using significantly enriched annotations. This study thereby doubled the number of known risk loci. The strongest disease pathways identified (P<10-6) belong to muscle cell differentiation and to mesenchyme development/differentiation, which fit with current pathophysiological BE/EA concepts. To our knowledge, this study identified for the first time an EA-specific association (rs9823696, P=1·6×10-8) near HTR3C/ABCC5 which is independent of BE development (P=0·45).Interpretation: The identified disease loci and pathways reveal new insights into the etiology of BE and EA. Furthermore, the EA-specific association at HTR3C/ABCC5 may constitute a novel genetic marker for the prediction of transition from BE to EA. Mutations in CFTR, one of the new risk loci identified in this study, cause cystic fibrosis (CF), the most common recessive disorder in Europeans. Gastroesophageal reflux (GER) belongs to the phenotypic CF-spectrum and represents the main risk factor for BE/EA. Thus, the CFTR locus may trigger a common GER-mediated pathophysiology.

A Scalable General Purpose System for Large-Scale Graph Processing

Graph analytics is an important and computationally demanding class of data analytics. It is essential to balance scalability, ease-of-use and high performance in large scale graph analytics. As such, it is necessary to hide the complexity of parallelism, data distribution and memory locality behind an abstract interface. The aim of this work is to build a scalable graph analytics framework that does not demand significant parallel programming experience based on NUMA-awareness.
The realization of such a system faces two key problems:
(i)~how to develop a scale-free parallel programming framework that scales efficiently across NUMA domains; (ii)~how to efficiently apply graph partitioning in order to create separate and largely independent work items that can be distributed among threads.

A novel methodology for analysis of large scale interconnected power and gas systems

The European Union continues to exert a large influence on the direction of member states energy policy. The 2020 targets for renewable energy integration have had significant impact on the operation of current power systems, forcing a rapid change from fossil fuel dominated systems to those with high levels of renewable power. Additionally, the overarching aim of an internal energy market throughout Europe has and will continue to place importance on multi-jurisdictional co-operation regarding energy supply. Combining these renewable energy and multi-jurisdictional supply goals results in a complicated multi-vector energy system, where the understanding of interactions between fossil fuels, renewable energy, interconnection and economic power system operation is increasingly important. This paper provides a novel and systematic methodology to fully understand the changing dynamics of interconnected energy systems from a gas and power perspective. A fully realistic unit commitment and economic dispatch model of the 2030 power systems in Great Britain and Ireland, combined with a representative gas transmission energy flow model is developed. The importance of multi-jurisdictional integrated energy system operation in one of the most strategically important renewable energy regions is demonstrated.

Energy efficiency optimization in hardware-constrained large-scale MIMO systems

Large-scale multiple-input multiple-output (MIMO) communication systems can bring substantial improvement in spectral efficiency and/or energy efficiency, due to the excessive degrees-of-freedom and huge array gain. However, large-scale MIMO is expected to deploy lower-cost radio frequency (RF) components, which are particularly prone to hardware impairments. Unfortunately, compensation schemes are not able to remove the impact of hardware impairments completely, such that a certain amount of residual impairments always exists. In this paper, we investigate the impact of residual transmit RF impairments (RTRI) on the spectral and energy efficiency of training-based point-to-point large-scale MIMO systems, and seek to determine the optimal training length and number of antennas which maximize the energy efficiency. We derive deterministic equivalents of the signal-to-noise-and-interference ratio (SINR) with zero-forcing (ZF) receivers, as well as the corresponding spectral and energy efficiency, which are shown to be accurate even for small number of antennas. Through an iterative sequential optimization, we find that the optimal training length of systems with RTRI can be smaller compared to ideal hardware systems in the moderate SNR regime, while larger in the high SNR regime. Moreover, it is observed that RTRI can significantly decrease the optimal number of transmit and receive antennas.

Graphene-MoS2 Hybrid Technology for Large-Scale Two-Dimensional Electronics

Two-dimensional (2D) materials have generated great interest in the last few years as a new toolbox for electronics. This family of materials includes, among others, metallic graphene, semiconducting transition metal dichalcogenides (such as MoS2) and insulating Boron Nitride. These materials and their heterostructures offer excellent mechanical flexibility, optical transparency and favorable transport properties for realizing electronic, sensing and optical systems on arbitrary surfaces. In this work, we develop several etch stop layer technologies that allow the fabrication of complex 2D devices and present for the first time the large scale integration of graphene with molybdenum disulfide (MoS2) , both grown using the fully scalable CVD technique. Transistor devices and logic circuits with MoS2 channel and graphene as contacts and interconnects are constructed and show high performances. In addition, the graphene/MoS2 heterojunction contact has been systematically compared with MoS2-metal junctions experimentally and studied using density functional theory. The tunability of the graphene work function significantly improves the ohmic contact to MoS2. These high-performance large-scale devices and circuits based on 2D heterostructure pave the way for practical flexible transparent electronics in the future. The authors acknowledge financial support from the Office of Naval Research (ONR) Young Investigator Program, the ONR GATE MURI program, and the Army Research Laboratory. This research has made use of the MI.

The large- and small-scale Ca IIK structure of the Milky Way from observations of Galactic and Magellanic sightlines

Aims. The large and small-scale (pc) structure of the Galactic interstellar medium can be investigated by utilising spectra of early-type stellar probes of known distances in the same region of the sky. This paper determines the variation in line strength of Ca ii at 3933.661 Å as a function of probe separation for a large sample of stars, including a number of sightlines in the Magellanic Clouds. 

Methods. FLAMES-GIRAFFE data taken with the Very Large Telescope towards early-type stars in 3 Galactic and 4 Magellanic open clusters in Ca ii are used to obtain the velocity, equivalent width, column density, and line width of interstellar Galactic calcium for a total of 657 stars, of which 443 are Magellanic Cloud sightlines. In each cluster there are between 43 and 111 stars observed. Additionally, FEROS and UVES Ca ii K and Na i D spectra of 21 Galactic and 154 Magellanic early-type stars are presented and combined with data from the literature to study the calcium column density - parallax relationship. 

Results. For the four Magellanic clusters studied with FLAMES, the strength of the Galactic interstellar Ca ii K equivalent width on transverse scales from ∼0.05-9 pc is found to vary by factors of ∼1.8-3.0, corresponding to column density variations of ∼0.3-0.5 dex in the optically-thin approximation. Using FLAMES, FEROS, and UVES archive spectra, the minimum and maximum reduced equivalent widths for Milky Way gas are found to lie in the range ∼35-125 mÅ and ∼30-160 mÅ for Ca ii K and Na i D, respectively. The range is consistent with a previously published simple model of the interstellar medium consisting of spherical cloudlets of filling factor ∼0.3, although other geometries are not ruled out. Finally, the derived functional form for parallax (π) and Ca ii column density (N_CaII) is found to be π(mas) = 1 / (2.39 × 10^-13 × N_CaII (cm^-2) + 0.11). Our derived parallax is ∼25 per cent lower than predicted by Megier et al. (2009, A&A, 507, 833) at a distance of ∼100 pc and ∼15 percent lower at a distance of ∼200 pc, reflecting inhomogeneity in the Ca ii distribution in the different sightlines studied.

The reliability and factorial validity of the Adolescent Alcohol Involvement Scale in a large sample in the United Kingdom

The assessment of adolescent drinking behavior is a complex task, complicated by variability in drinking patterns, the transitory and developmental nature of the behavior and the reliance (for large scale studies) on self-report questionnaires. The Adolescent Alcohol Involvement Scale (Mayer & Filstead, 1979) is a 14-item screening tool designed to help to identify alcohol misusers or more problematic drinkers. The present study utilized a large sample (n = 4066) adolescents from Northern Ireland. Results of Confirmatory Factor Analyses and reliability estimates revealed that the 14-items share sufficient common variance that scores can be considered to be reliable and that the 14 items can be scored to provide a composite alcohol use score.