'Trusting the numbers': mineral prospecting, raising finance and the governance of knowledge

Mineral prospecting and raising finance for ‘junior’ mining firms has historically been regarded as a speculative activity. For the regulators of securities markets upon which ‘junior’ mining companies seek to raise capital, a perennial problem has been handling not only the indeterminacy of scientific claims, but also the social basis of epistemic practices. This paper examines the production of a system of public warrant and associated knowledge practices intended to enable investors to differentiate between ‘destructive’ and ‘productive’ varieties of financial speculation. It traces the use of the notion of ‘disclosure’ in constructing and legitimizing the ‘juniors’ market in Canada. It argues that though the work of ‘economics’ may be necessary in the construction of markets, it is by no means sufficient. Attention must also be given to the ways in which legal models of ‘the free-market’ can be translated and constantly re-worked across the sites and spaces of regulatory practice, animating the geographies of markets.

'Trusting the numbers': mineral prospecting, raising finance and the governance of knowledge

Mineral prospecting and raising finance for ‘junior’ mining firms has historically been regarded as a speculative activity. For the regulators of securities markets upon which ‘junior’ mining companies seek to raise capital, a perennial problem has been handling not only the indeterminacy of scientific claims, but also the social basis of epistemic practices. This paper examines the production of a system of public warrant and associated knowledge practices intended to enable investors to differentiate between ‘destructive’ and ‘productive’ varieties of financial speculation. It traces the use of the notion of ‘disclosure’ in constructing and legitimizing the ‘juniors’ market in Canada. It argues that though the work of ‘economics’ may be necessary in the construction of markets, it is by no means sufficient. Attention must also be given to the ways in which legal models of ‘the free-market’ can be translated and constantly re-worked across the sites and spaces of regulatory practice, animating the geographies of markets.

Modelling the nonlinear behaviour and fracture process of AS4/PEKK thermoplastic composite under shear loading

The accurate determination of non-linear shear behaviour and fracture toughness of continuous carbon-fibre/polymer composites remains a considerable challenge. These measurements are often necessary to generate material parameters for advanced computational damage models. In particular, there is a dearth of detailed shear fracture toughness characterisation for thermoplastic composites which are increasingly generating renewed interest within the aerospace and automotive sectors. In this work, carbon fibre (AS4)/ thermoplastic Polyetherketoneketone (PEKK) composite V-notched cross-ply specimens were manufactured to investigate their non-linear response under pure shear loading. Both monotonic and cyclic loading were applied to study the shear modulus degradation and progressive failure. For the first time in the reported literature, we use the essential work of fracture approach to measure the shear fracture toughness of continuous fibre reinforced composite laminates. Excellent geometric similarity in the load-displacement curves was observed for ligament-scaled specimens. The laminate fracture toughness was determined by linear regression, of the specific work of fracture values, to zero ligament thickness, and verified with computational models. The matrix intralaminar fracture toughness (ply level fracture toughness), associated with shear loading was determined by the area method. This paper also details the numerical implementation of a new three-dimensional phenomenological model for carbon fibre thermoplastic composites using the measured values, which is able to accurately represent the full non-linear mechanical response and fracture process. The constitutive model includes a new non-linear shear profile, shear modulus degradation and load reversal. It is combined with a smeared crack model for representing ply-level damage initiation and propagation. The model is shown to accurately predict the constitutive response in terms of permanent plastic strain, degraded modulus as well as load reversal. Predictions are also shown to compare favourably with the evolution of damage leading to final fracture.

What counts and what is being counted – The social organization of knowledge on the front lines of emergency medical services.

Paramedics are trained to use specialized medical knowledge and a variety of medical procedures and pharmaceutical interventions to “save patients and prevent further damage” in emergency situations, both as members of “health-care teams” in hospital emergency departments (Swanson, 2005: 96) and on the streets – unstandardized contexts “rife with chaotic, dangerous, and often uncontrollable elements” (Campeau, 2008: 3). The paramedic’s unique skill-set and ability to function in diverse situations have resulted in the occupation becoming ever more important to health care systems (Alberta Health and Wellness, 2008: 12).
Today, prehospital emergency services, while varying, exist in every major city and many rural areas throughout North America (Paramedics Association of Canada, 2008) and other countries around the world (Roudsari et al., 2007). Services in North America, for instance, treat and/or transport 2 million Canadians (over 250,000 in Alberta alone ) and between 25 and 30 million Americans annually (Emergency Medical Services Chiefs of Canada, 2006; National EMS Research Agenda, 2001). In Canada, paramedics make up one of the largest groups of health care professionals, with numbers exceeding 20,000 (Pike and Gibbons, 2008; Paramedics Association of Canada, 2008). However, there is little known about the work practices of paramedics, especially in light of recent changes to how their work is organized, making the profession “rich with unexplored opportunities for research on the full range of paramedic work” (Campeau, 2008: 2).

This presentation reports on findings from an institutional ethnography that explored the work of paramedics and different technologies of knowledge and governance that intersect with and organize their work practices. More specifically, my tentative focus of this presentation is on discussing some of the ruling discourses central to many of the technologies used on the front lines of EMS in Alberta and the consequences of such governance practices for both the front line workers and their patients. In doing so, I will demonstrate how IE can be used to answer Rankin and Campbell’s (2006) call for additional research into “the social organization of information in health care and attention to the (often unintended) ways ‘such textual products may accomplish…ruling purposes but otherwise fail people and, moreover, obscure that failure’ (p. 182)” (cited in McCoy, 2008: 709).

The Region between State and Nation: British and Irish conceptions of Northern Ireland as a European Region

This article investigates the concept of regionalism in the EU and its relationship to changing conceptions of the nation-statehood in Ireland and Britain. More specifically, it examines how the notion of regionalism has developed in official discourse during states' adaptation to both internal challenges and the process of European integration. I explore this question through an analysis of the British and Irish state elites approaches to the Northern Ireland conflict and their perceptions of European regionalism in this context. In identifying the differences and, indeed, similarities between these states' approaches to European and regional dynamics, I develop new perspective on post-Agreement Northern Ireland and the concept of multilevel governance.

Process of debonding in RC beams shear-strengthened with FRP U-strips or side strips

Reinforced concrete (RC) beams may be strengthened for shear using externally bonded fiber reinforced polymer (FRP) composites in the form of side bonding, U-jacketing or complete wrapping. The shear failure of almost all RC beams shear-strengthened with side bonded FRP and the majority of those strengthened with FRP U-jackets, is due to debonding of the FRP. The bond behavior between the externally-bonded FRP reinforcement (referred to as FRP strips for simplicity) and the concrete substrate therefore plays a crucial role in the failure process of these beams. Despite extensive research in the past decade, there is still a lack of understanding of how debonding of FRP strips in such a beam propagates and how the debonding process affects its shear behavior. This paper presents an analytical study on the progressive debonding of FRP strips in such strengthened beams. The complete debonding process is modeled and the contribution of the FRP strips to the shear capacity of the beam is quantified. The validity of the analytical solution is verified by comparing its predictions with numerical results from a finite element analysis. This analytical treatment represents a significant step forward in understanding how interaction between FRP strips, steel stirrups and concrete affects the shear resistance of RC beams shear-strengthened with FRP strips.

Video Activism and the Ambiguities of Counter-Surveillance

This paper examines the use of visual technologies by political activists in protest situations to monitor police conduct. Using interview data with Australian video activists, this paper seeks to understand the motivations, techniques and outcomes of video activism, and its relationship to counter-surveillance and police accountability. Our data also indicated that there have been significant transformations in the organization and deployment of counter-surveillance methods since 2000, when there were large-scale protests against the World Economic Forum meeting in Melbourne accompanied by a coordinated campaign that sought to document police misconduct. The paper identifies and examines two inter-related aspects of this: the act of filming and the process of dissemination of this footage. It is noted that technological changes over the last decade have led to a proliferation of visual recording technologies, particularly mobile phone cameras, which have stimulated a corresponding proliferation of images. Analogous innovations in internet communications have stimulated a coterminous proliferation of potential outlets for images Video footage provides activists with a valuable tool for safety and publicity. Nevertheless, we argue, video activism can have unintended consequences, including exposure to legal risks and the amplification of official surveillance. Activists are also often unable to control the political effects of their footage or the purposes to which it is used. We conclude by assessing the impact that transformations in both protest organization and media technologies might have for counter-surveillance techniques based on visual surveillance.

Fixed-boundary constituencies and the principle of equal representation in Ireland

The process of constituency boundary revision in Ireland, designed to satisfy what is perceived as a rigid requirement that a uniform deputy-population ratio be maintained across constituencies, has traditionally consumed a great deal of the time of politicians and officials. For almost two decades after a High Court ruling in 1961, the process was a political one, was highly contentious, and was marked by serious allegations of ministerial gerrymandering. The introduction in 1979 of constituency commissions made up of officials neutralised, for the most part, charges that the system had become too politicised, but it continued the process of micro-management of constituency boundaries. This article suggests that the continuing problems caused by this system – notably, the permanently changing nature of constituency boundaries and resulting difficulties of geographical identification – could be resolved by reversion to the procedure that is normal in proportional representation systems: periodic post-census allocation of seats to constituencies whose boundaries are based on those of recognised local government units and which are stable over time. This reform, replacing the principle of redistricting by the principle of reapportionment, would result in more recognisable constituencies, more predictable boundary trajectories over time, and a more efficient, fairer, and speedier process of revision.

'What say you to [this] book? Is it yours?'::Oral and Collaborative Narrative Trajectories in the Mediated Writings of Anna Trapnel

This article argues that, when a printed page is initially orally generated and then transcribed, either at the time or on a subsequent occasion by a listener or an interlocutor, there are important critical implications for the “I” of the account. It takes as a case study Anna Trapnel's first published works. Appearing within a few weeks of each other in 1654, The Cry of a Stone and Strange and Wonderful News are both mediated texts, large parts of which depend on the agency of a relater. The article begins by examining the textual traces of the relater, arguing for the centrality of his role and other agencies in the shaping of the works which bear Trapnel's name. Situating itself in relation to a current orientation in feminist autobiographical theory that places emphasis on the external requirement to narrate one's life, rather than on the spontaneous production of autobiography by an inner self, the article emphasizes notions of coaxing, witnessing and intersubjectivity to point up an appreciation of women's life writing as a species of cultural production in which various historical actors—male and female—participate. This dialogic process, which persists into the afterlife of transcription, owes part of its genesis to the political vagaries of 1654 and precipitates two contrasting—but equally “authentic”—versions of Trapnel's life and self. Mapping this movement, discussion concentrates on the ways in which a critical confrontation with women's oral narrative is as much an activity of disentangling as it is of reconstructing, an activity which is revealing of the extent to which a spectrum of social and cultural networks participates in and facilitates the female writing act.

The determinants of knowledge transfer within collaborative new product development projects

Purpose – This paper explores the factors which determine the degree of knowledge transfer in inter-firm new product development projects. We test a theoretical model exploring how inter-firm knowledge transfer is enabled or hindered by a buyer’s learning intent, the degree of supplier protectiveness, inter-firm knowledge ambiguity, and absorptive capacity. Design/methodology/approach – A sample of 153 R&D intensive manufacturing firms in the UK automotive, aerospace, pharmaceutical, electrical, chemical, and general manufacturing industries were used to test the framework. Two-step structural equation modeling in AMOS 7.0 was used to analyse the data. Findings – Our results indicate that a buyer’s learning intent increases inter-firm knowledge transfer, but also acts as an incentive for suppliers to protect their knowledge. Such defensive measures increase the degree of inter-firm knowledge ambiguity, encouraging buyer firms to invest in absorptive capacity as a means to interpret supplier knowledge, but also increase the degree of knowledge transfer. Practical implications – Our paper illustrates the effects of focusing on acquisition, rather than accessing, supplier technological knowledge. We show that an overt learning strategy can be detrimental to knowledge transfer between buyer-supplier, as supplier’s react by restricting the flow of information. Organisations are encouraged to consider this dynamic when engaging in multi-organisational new product development projects. Originality/value – This paper examines the dynamics of knowledge transfer within inter-firm NPD projects, showing how transfer is influenced by the buyer firm’s learning intention, supplier’s response, characteristics of the relationship and knowledge to be transferred.

International perspectives on the influence of structure and process of weaning from mechanical ventilation.

Background 
Recently, clinical and research attention has been focused on refining weaning processes to improve outcomes for critically ill patients who require mechanical ventilation. One such process, use of a weaning protocol, has yielded conflicting results, arguably because of the influence of existing context and processes.

Objective 
To compare international data to assess differences in context and processes in intensive care units that could influence weaning.  

Methods 
Review of existing national data on provision of care for critically ill patients, including structure, staffing, skill mix, education, roles, and responsibilities for weaning in intensive care units of selected countries.

Results 
Australia, New Zealand, Denmark, Norway, Sweden, and the United Kingdom showed similarities in critical care provision, structure, skill mix, and staffing ratios in intensive care units. Weaning in these countries is generally a collaborative process between nurses and physicians. Notable differences in intensive care units in the United States were the frequent use of an open structure and inclusion of respiratory therapists on the intensive care unit’s health care team. Nurses may be excluded from direct management of ventilator weaning in some institutions, as this role is primarily assumed by respiratory therapists guided by medical directives. Availability of critical care beds was highest in the United States and lowest in the United Kingdom.

Conclusion 
Context and processes of care that could influence ventilator weaning outcomes varied considerably across countries. Further quantification of these contextual influences should be considered when translating research findings into local clinical practice and when designing randomized, controlled trials.

Waste Management and Sustainability during the Design Phase of a Construction Project: A Qualitative Review

Waste management and sustainability are two core underlying philosophies that the construction sector must acknowledge and implement; however, this can prove difficult and time consuming. To this end, the aim of this paper is to examine waste management strategies and the possible benefits, advantages and disadvantages to their introduction and use, while also to examine any inter-relationship with sustainability, particularly at the design stage. The purpose of this paper is to gather, examine and review published works and investigate factors which influence economic decisions at the design phase of a construction project. In addressing this aim, a three tiered sequential research approach is adopted; in-depth literature review, interviews/focus groups and qualitative analysis. The resulting data is analyzed, discussed, with potential conclusions identified; paying particular attention to implications for practice within architectural firms. This research is of importance, particularly to the architectural sector, as it can add to the industry’s understanding of the design process, while also considering the application and integration of waste management into the design procedure. Results indicate that the researched topic had many advantages but also had inherent disadvantages. It was found that the potential advantages outweighed disadvantages, but uptake within industry was still slow and that better promotion and their benefits to; sustainability, the environment, society and the industry were required.

Measuring horizontal integration among health care providers in the community: An examination of a collaborative process within a palliative care network

In many countries formal or informal palliative care networks (PCNs) have evolved to better integrate community-based services for individuals with a life-limiting illness. We conducted a cross-sectional survey using a customized tool to determine the perceptions of the processes of palliative care delivery reflective of horizontal integration from the perspective of nurses, physicians and allied health professionals working in a PCN, as well as to assess the utility of this tool. The process elements examined were part of a conceptual framework for evaluating integration of a system of care and centred on interprofessional collaboration. We used the Index of Interdisciplinary Collaboration (IIC) as a basis of measurement. The 86 respondents (85% response rate) placed high value on working collaboratively and most reported being part of an interprofessional team. The survey tool showed utility in identifying strengths and gaps in integration across the network and in detecting variability in some factors according to respondent agency affiliation and profession. Specifically, support for interprofessional communication and evaluative activities were viewed as insufficient. Impediments to these aspects of horizontal integration may be reflective of workload constraints, differences in agency operations or an absence of key structural features.

Building Information Modelling (BIM) Software Interoperability: A Review of the Construction Sector

Building Information Modelling (BIM) is continuing to evolve and develop as the construction industry progresses towards level 2 maturity. However, one of the core barriers in this progression is the aspect of interoperability between software packages. This research and paper stems from a Knowledge Transfer Partnership (KTP) where both industry and academia come together to address this shortcoming within the sector. One of the core objectives of this partnership and the aim of this study is investigating potential solutions to this barrier, while also developing best working practices to be applied in industry. Using one of the case studies from this partnership (a temporary steel structure), this paper demonstrates a potential solution to addressing interoperability within structural analysis and detailing packages, MasterSeries and Revit respectively. The findings of the research indicate that a process based approach rather than that of additional software coding as being the preferred solution. The results of this preliminary research will aid in the development of the topic of interoperability within the sector, while also developing the knowledge and competencies of the parties within the KTP. The findings are explored further, by providing an overview of the resolution process adopted in this case study, in overcoming the interoperability that arose as the project progressed. It is envisaged that this study will assist the construction sector and its adoption of BIM technologies, while also addressing the critical aspect of operability between software.