Extended Radiocarbon Calibration in the Anglo-Saxon Period, AD395-485 and AD735-805

Radiocarbon dating has been used infrequently as a chronological tool for research in Anglo-Saxon archaeology. Primarily, this is because the uncertainty of calibrated dates provides little advantage over traditional archaeological dating in this period. Recent advances in Bayesian methodology in conjunction with high-precision 14C dating have, however, created the possibility of both testing and refining the established Anglo-Saxon chronologies based on typology of artifacts. The calibration process within such a confined age range, however, relies heavily on the structural accuracy of the calibration curve. We have previously reported decadal measurements on a section of the Irish oak chronology for the period AD 495–725 (McCormac et al. 2004). In this paper, we present decadal measurements for the periods AD 395–485 and AD 735–805,which extends the original calibration set.

Effective collision strengths for transitions in Fe XI

Collision strengths for transitions among the lowest 48 fine- structure levels belonging to the (1s(2)2s(2)2p(6)) 3s(2)3p(4), 3s3p(5), 3s(2)3p(3)3d and 3p(6) configurations of Fe XI have been calculated using the Dirac Atomic R-matrix Code (DARC) of Norrington & Grant (2003). Results are tabulated at energies above thresholds in the range 10 less than or equal to E less than or equal to 100 Ry, although resonances have been resolved in a fine energy mesh in the thresholds region. Effective collision strengths, obtained after integrating the collision strengths over a Maxwellian distribution of electron velocities, are also tabulated over a wide electron temperature range below 5 x 10(6) K. Comparisons with other available results are made, and the accuracy of the present data is assessed.

Glory and thresholds effects in H+D-2 reactive angular scattering

We analyse H + D-2 reactive angular scattering using the S- matrix elements obtained by Aoiz et al. and Althorpe et al. Enhancement of small angle scattering in the v' = 3

Radiocarbon peat chronologies and environmental change

Raised bog peat deposits form important archives for reconstructing past changes in climate. Precise and reliable age models are of vital importance for interpreting such archives. We propose enhanced, Markov chain Monte Carlo based methods for obtaining age models from radiocarbon-dated peat cores, based on the assumption of piecewise linear accumulation. Included are automatic choice of sections, a measure of the goodness of fit and outlier downweighting. The approach is illustrated by using a peat core from the Netherlands.

Densities and Derived Thermodynamic Properties of Imidazolium-, Pyridinium-, Pyrrolidinium-, and Piperidinium-Based Ionic Liquids

In the present work, experimental density measurements are reported along with the derived thermodynamic properties, such as the isothermal compressibility (?T), the isobaric expansivity (ap), and the thermal pressure coefficient (?v) for imidazolium-, pyridinium-, pyrrolidinium-, and piperidinium-based ionic liquids (ILs), namely, 1-ethyl-3-methylimidazolium trifluoromethanesulfonate [C2mim][CF3SO3], 3-methyl-1-propylpyridinium bis(trifluoromethylsulfonyl)imide [C3mpy][NTf2], 1-methyl-1-propylpyrrolidinium bis(trifluoromethylsulfonyl)imide [C3mpyr][NTf2], 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide [C4mpyr][NTf2], and 1-methyl-1-propylpiperidinium bis(trifluoromethylsulfonyl)imide [C3mpip][NTf2] in the pressure (0.10 <P/MPa <35.00) and temperature (293.15 <T/K <393.15) domains. These ILs were chosen to provide an understanding of the influence of the cation and anion on the properties under study. Experimental densities are correlated with the Tait equation with an average absolute relative deviation (AARD) better than 0.02 %. It is shown that experimental densities are in good agreement with the densities obtained by the predictive method previously proposed by us.

The Association Between Alcohol and Reflux Esophagitis, Barrett's Esophagus, and Esophageal Adenocarcinoma

Background & Aims: Alcohol consumption may increase gastroesophageal reflux symptoms, cause damage to the esophageal mucosa, and/or promote carcinogenesis. However, reports about the association between alcohol and reflux esophagitis, Barrett's esophagus, and esophageal adenocarcinoma are conflicting. Methods: Information relating to alcohol consumption, at age 21 and 5 years before the interview date, was collected from 230 reflux esophagitis, 224 Barrett's esophagus, and 227 esophageal adenocarcinoma patients and 260 frequency-matched population controls. Logistic regression analyses were used to compare alcohol consumption in the 3 case groups to controls with adjustment for potential confounders. Results: Population controls reporting gastroesophageal reflux symptoms were less likely than controls without symptoms to drink alcohol 5 years before the interview date (odds ratio [OR], 0.44, 0.20-0.99). No associations were observed between total alcohol consumption 5 years before the interview date and reflux esophagitis, Barrett's esophagus, or esophageal adenocarcinoma (OR, 1.26, 0.78-2.05; OR, 0.72, 0.43-1.21; and OR, 0.75, 0.46-1.22, respectively). Wine was inversely associated with reflux esophagitis (OR, 0.45, 0.27-0.75). Total alcohol consumption at age 21 years was significantly associated with reflux esophagitis (OR, 2.24, 1.35-3.74) but not with Barrett's esophagus or esophageal adenocarcinoma (OR, 1.06, 0.63-1.79 and OR, 1.27, 0.77-2.10, respectively). Conclusions: Alcohol consumption in early adulthood may lead to the development of reflux esophagitis. More recent alcohol consumption does not appear to confer any increased risk of reflux esophagitis, Barrett's esophagus, or esophageal adenocarcinoma. In fact, wine consumption may reduce the risk of these 3 esophageal disorders.

Germanium on sapphire

This paper explores the potential of germanium on sapphire (GeOS) wafers as a universal substrate for System on a Chip (SOC), mm wave integrated circuits (MMICs) and optical imagers. Ge has a lattice constant close to that of GaAs enabling epitaxial growth. Ge, GaAs and sapphire have relatively close temperature coefficients of expansion (TCE), enabling them to be combined without stress problems. Sapphire is transparent over the range 0.17 to 5.5 µm and has a very low loss tangent (a) for frequencies up to 72 GHz. Ge bonding to sapphire substrates has been investigated with regard to micro-voids and electrical quality of the Ge back interface. The advantages of a sapphire substrate for integrated inductors, coplanar waveguides and crosstalk suppression are also highlighted. MOS transistors have been fabricated on GeOS substrates, produced by the Smart-cut process, to illustrate the compatibility of the substrate with device processing. © 2008 World Scientific Publishing Company.

Effect of the incorporation of hydroxy-terminated liquid silicones on the cure characteristics, morphology, and release of a model protein from silicone elastomer-covered rods

Silicone elastomer systems have previously been shown to offer potential for the sustained release of protein therapeutics. However, the general requirement for the incorporation of large amounts of release enhancing solid excipients to achieve therapeutically effective release rates from these otherwise hydrophobic polymer systems can detrimentally affect the viscosity of the precure silicone elastomer mixture and its curing characteristics. The increase in viscosity necessitates the use of higher operating pressures in manufacture, resulting in higher shear stresses that are often detrimental to the structural integrity of the incorporated protein. The addition of liquid silicones increases the initial tan delta value and the tan delta values in the early stages of curing by increasing the liquid character (G '') of the silicone elastomer system and reducing its elastic character (G'), thereby reducing the shear stress placed on the formulation during manufacture and minimizing the potential for protein degradation. However, SEM analysis has demonstrated that if the liquid character of the silicone elastomer is too high, the formulation will be unable to fill the mold during manufacture. This study demonstrates that incorporation of liquid hydroxy-terminated polydimethylsiloxanes into addition-cure silicone elastomer-covered rod formulations can both effectively lower the viscosity of the precured silicone elastomer and enhance the release rate of the model therapeutic protein bovine serum albumin. (C) 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011