A multiconfigurational time-dependent Hartree-Fock method for excited electronic states. I. General formalism and application to open-shell states

The solution of the time-dependent Schrodinger equation for systems of interacting electrons is generally a prohibitive task, for which approximate methods are necessary. Popular approaches, such as the time-dependent Hartree-Fock (TDHF) approximation and time-dependent density functional theory (TDDFT), are essentially single-configurational schemes. TDHF is by construction incapable of fully accounting for the excited character of the electronic states involved in many physical processes of interest; TDDFT, although exact in principle, is limited by the currently available exchange-correlation functionals. On the other hand, multiconfigurational methods, such as the multiconfigurational time-dependent Hartree-Fock (MCTDHF) approach, provide an accurate description of the excited states and can be systematically improved. However, the computational cost becomes prohibitive as the number of degrees of freedom increases, and thus, at present, the MCTDHF method is only practical for few-electron systems. In this work, we propose an alternative approach which effectively establishes a compromise between efficiency and accuracy, by retaining the smallest possible number of configurations that catches the essential features of the electronic wavefunction. Based on a time-dependent variational principle, we derive the MCTDHF working equation for a multiconfigurational expansion with fixed coefficients and specialise to the case of general open-shell states, which are relevant for many physical processes of interest. (C) 2011 American Institute of Physics. [doi: 10.1063/1.3600397]

A PEPTIDE FROM THE CAUDAL NEUROSECRETORY-SYSTEM OF THE DOGFISH SCYLIORHINUS-CANICULA THAT IS STRUCTURALLY RELATED TO UROTENSIN-I

Using reversed-phase HPLC in combination with a radioimmunoassay for ovine corticotropin-releasing hormone (CRH), a peptide with CRH-like immunoreactivity was isolated in pure form from an extract of the caudal spinal cord region of the spotted dogfish, Scyliorhinus canicula. The primary structure of the peptide was established as Pro-Ala-Glu-Thr-Pro-Asn-Ser-Leu-Asp-Leu(10)-Thr-Phe-His-Leu-Leu-Arg-Glu-Met-Ile-Glu(20)-Ile-Ala-Lys-His-Glu-Asn-Gln-Gln-Met-Gln(30)-Ala-Asp-Ser-Asn-Arg-Arg-Ile-Met-Asp-Thr(40)-Ile . NH2. This amino acid sequence shows moderate structural similarity to Catostomus urotensin I (51%) and to human CRH (56%). The data provide, therefore, chemical evidence to support the conclusions of earlier immunohistochemical studies that the diffuse caudal neurosecretory system of elasmobranchs produces a peptide that is immunochemically related to teleost urotensin I peptides. However, the primary structure of urotensin I has been poorly conserved during evolution. (C) 1995 Academic Press, Inc.

Troponin I and cardiovascular risk prediction in the general population: the BiomarCaRE consortium

AIMS: Our aims were to evaluate the distribution of troponin I concentrations in population cohorts across Europe, to characterize the association with cardiovascular outcomes, to determine the predictive value beyond the variables used in the ESC SCORE, to test a potentially clinically relevant cut-off value, and to evaluate the improved eligibility for statin therapy based on elevated troponin I concentrations retrospectively.

METHODS AND RESULTS: Based on the Biomarkers for Cardiovascular Risk Assessment in Europe (BiomarCaRE) project, we analysed individual level data from 10 prospective population-based studies including 74 738 participants. We investigated the value of adding troponin I levels to conventional risk factors for prediction of cardiovascular disease by calculating measures of discrimination (C-index) and net reclassification improvement (NRI). We further tested the clinical implication of statin therapy based on troponin concentration in 12 956 individuals free of cardiovascular disease in the JUPITER study. Troponin I remained an independent predictor with a hazard ratio of 1.37 for cardiovascular mortality, 1.23 for cardiovascular disease, and 1.24 for total mortality. The addition of troponin I information to a prognostic model for cardiovascular death constructed of ESC SCORE variables increased the C-index discrimination measure by 0.007 and yielded an NRI of 0.048, whereas the addition to prognostic models for cardiovascular disease and total mortality led to lesser C-index discrimination and NRI increment. In individuals above 6 ng/L of troponin I, a concentration near the upper quintile in BiomarCaRE (5.9 ng/L) and JUPITER (5.8 ng/L), rosuvastatin therapy resulted in higher absolute risk reduction compared with individuals <6 ng/L of troponin I, whereas the relative risk reduction was similar.

CONCLUSION: In individuals free of cardiovascular disease, the addition of troponin I to variables of established risk score improves prediction of cardiovascular death and cardiovascular disease.

Challenge of culture, conscience, and contract to general practitioners' care of their own health: qualitative study

Objective: To explore general practitioners' perceptions of the effects of their profession and training on their attitudes to illness in themselves and colleagues. Design: Qualitative study using focus groups and indepth interviews. Setting: Primary care in Northern Ireland. Participants: 27 general practitioners, including six recently appointed principals and six who also practised occupational medicine part time. Main outcome measures: Participants' views about their own and colleagues' health. Results: Participants were concerned about the current level of illness within the profession. They described their need to portray a healthy image to both patients and colleagues. This hindered acknowledgement of personal illness and engaging in health screening. Embarrassment in adopting the role of a patient and concerns about confidentiality also influenced their reactions to personal illness. Doctors' attitudes can impede their access to appropriate health care for themselves, their families, and their colleagues. A sense of conscience towards patients and colleagues and the working arrangements of the practice were cited as reasons for working through illness and expecting colleagues to do likewise. Conclusions: General practitioners perceive that their professional position and training adversely influence their attitudes to illness in themselves and their colleagues. Organisational changes within general practice, including revalidation, must take account of barriers experienced by general practitioners in accessing health care. Medical education and culture should strive to promote appropriate self care among doctors.

A randomised study of two training programmes for general practitioners in the techniques of shoulder injection

Training on patients in addition to conventional mannequins increased GPs shoulder injection activity and their level of confidence.Hospital injection clinicsa may provide a suitable setting in which to train GPs interested in developing their shoulder joint injection skills

General rules for predicting where a catalytic reaction should occur on metal surfaces: A density functional theory study of C-H and C-O bond breaking/making on flat, stepped, and kinked metal surfaces

To predict where a catalytic reaction should occur is a fundamental issue scientifically. Technologically, it is also important because it can facilitate the catalyst's design. However, to date, the understanding of this issue is rather limited. In this work, two types of reactions, CH4 CH3 + H and CO C + 0 on two transition metal surfaces, were chosen as model systems aiming to address in general where a catalytic reaction should occur. The dissociations of CH4 - CH3 + H and CO --> C + O and their reverse reactions on flat, stepped, and kinked Rh and Pd surfaces were studied in detail. We find the following: First, for the CH4 Ch(3) + H reaction, the dissociation barrier is reduced by similar to0.3 eV on steps and kinks as compared to that on flat surfaces. On the other hand, there is essentially no difference in barrier for the association reaction of CH3 + H on the flat surfaces and the defects. Second, for the CO C + 0 reaction, the dissociation barrier decreases dramatically (more than 0.8 eV on Rh and Pd) on steps and kinks as compared to that on flat surfaces. In contrast to the CH3 + H reaction, the C + 0 association reaction also preferentially occurs on steps and kinks. We also present a detailed analysis of the reaction barriers in which each barrier is decomposed quantitatively into a local electronic effect and a geometrical effect. Our DFT calculations show that surface defects such as steps and kinks can largely facilitate bond breaking, while whether the surface defects could promote bond formation depends on the individual reaction as well as the particular metal. The physical origin of these trends is identified and discussed. On the basis of our results, we arrive at some simple rules with respect to where a reaction should occur: (i) defects such as steps are always favored for dissociation reactions as compared to flat surfaces; and (ii) the reaction site of the association reactions is largely related to the magnitude of the bonding competition effect, which is determined by the reactant and metal valency. Reactions with high valency reactants are more likely to occur on defects (more structure-sensitive), as compared to reactions with low valency reactants. Moreover, the reactions on late transition metals are more likely to proceed on defects than those on the early transition metals.

The diversity of extradiol dioxygenase (<i>edoi>) genes in cresol degrading rhodococci from a creosote-contaminated site that express a wide range of degradative abilities.

Analysis of the bacterial population of soil surface samples from a creosote-contaminated site showed that up to 50% of the culturable micro-organisms detected were able to utilise a mixture of cresols. From fifty different microbial isolates fourteen that could utilise more than one cresol isomer were selected and identified by 16S rRNA analysis. Eight isolates were Rhodococcus strains and six were Pseudomonas strains. In general, the Rhodococcus strains exhibited a broader growth substrate range than the Pseudomonas strains. The distribution of various extradiol dioxygenase (edo) genes, previously associated with aromatic compound degradation in rhodococci, was determined for the Rhodococcus strains by PCR detection and Southern-blot hybridization. One strain, Rhodococcus sp. I1 exhibited the broadest growth substrate range and possessed five different edo genes. Gene disruption experiments indicated that two genes (edoC and edoD) were associated with isopropylbenzene and naphthalene catabolism respectively. The other Rhodococcus strains also possessed some of the edo genes and one (edoB) was present in all of the Rhodococcus strains analysed. None of the rhodococcal edo genes analysed were present in the Pseudomonas strains isolated from the site. It was concluded that individual strains of Rhodococcus possess a wide degradative ability and may be very important in the degradation of complex mixtures of substrates found in creosote.

Early-type stars observed in the ESO UVES Paranal Observatory Project - I. Interstellar NaIUV, TiII and CaIIKobservations

We present an analysis of interstellar NaI (lambda(air) = 3302.37 and 3302.98 angstrom), TiII (lambda(air) = 3383.76 angstrom) and CaII K (lambda(air) = 3933.66 angstrom) absorption features for 74 sightlines towards O- and B-type stars in the Galactic disc. The data were obtained from the Ultraviolet and Visual Echelle Spectrograph Paranal Observatory Project, at a spectral resolution of 3.75 km s(-1) and with mean signal-to-noise ratios per pixel of 260, 300 and 430 for the NaI, TiII and CaII observations, respectively. Interstellar features were detected in all but one of the TiII sightlines and all of the CaII sightlines. The dependence of the column density of these three species with distance, height relative to the Galactic plane, HI column density, reddening and depletion relative to the solar abundance has been investigated. We also examine the accuracy of using the NaI column density as an indicator of that for HI. In general, we find similar strong correlations for both Ti and Ca, and weaker correlations for Na. Our results confirm the general belief that Ti and Ca occur in the same regions of the interstellar medium ( ISM) and also that the TiII/CaII ratio is constant over all parameters. We hence conclude that the absorption properties of Ti and Ca are essentially constant under the general ISM conditions of the Galactic disc.

Is the General Public Licence a Rational Choice?

Open source projects are networks of developers, distributors and end-users of non-proprietary created knowledge goods. It has been argued that this form of organization has some advantages over the firm or market coordination. I show that for sufficiently convex and modular projects proprietary licences are not able to sustain sequential knowledge production which, however, can be carried out if the project is run on the open source basis.

Structural and chemical embrittlement of grain boundaries by impurities: A general theory and first-principles calculations for copper

First-principles calculations of the Sigma 5(310)[001] symmetric tilt grain boundary in Cu with Bi, Na, and Ag substitutional impurities provide evidence that in the phenomenon of Bi embrittlement of Cu grain boundaries electronic effects do not play a major role; on the contrary, the embrittlement is mostly a structural or "size" effect. Na is predicted to be nearly as good an embrittler as Bi, whereas Ag does not embrittle the boundary in agreement with experiment. While we reject the prevailing view that "electronic" effects (i.e., charge transfer) are responsible for embrittlement, we do not exclude the role of chemistry. However, numerical results show a striking equivalence between the alkali metal Na and the semimetal Bi, small differences being accounted for by their contrasting "size" and "softness" (defined here). In order to separate structural and chemical effects unambiguously if not uniquely, we model the embrittlement process by taking the system of grain boundary and free surfaces through a sequence of precisely defined gedanken processes; each of these representing a putative mechanism. We thereby identify three mechanisms of embrittlement by substitutional impurities, two of which survive in the case of embrittlement or cohesion enhancement by interstitials. Two of the three are purely structural and the third contains both structural and chemical elements that by their very nature cannot be further unraveled. We are able to take the systems we study through each of these stages by explicit computer simulations and assess the contribution of each to the net reduction in intergranular cohesion. The conclusion we reach is that embrittlement by both Bi and Na is almost exclusively structural in origin; that is, the embrittlement is a size effect.

General insight into CO oxidation: A density functional theory study of the reaction mechanism on platinum oxides

CO oxidation on PtO2(110) has been studied using density functional theory calculations. Four possible reaction mechanisms were investigated and the most feasible one is the following: (i) the O at the bridge site of PtO2(110) reacts with CO on the coordinatively unsaturated site (CUS) with a negligible barrier; (ii) O-2 adsorbs on the bridge site and then interacts with CO on the CUS to form an OO-CO complex; (iii) the bond of O-OCO breaks to produce CO2 with a small barrier (0.01 eV). The CO oxidation mechanisms on metals and metal oxides are rationalized by a simple model: The O-surface bonding determines the reactivity on surfaces; it also determines whether the atomic or molecular mechanism is preferred. The reactivity on metal oxides is further found to be related to the 3rd ionization energy of the metal atom.

General trends in the barriers of catalytic reactions on transition metal surfaces

A catalyst preparation by design is one of the ultimate goals in chemistry. The first step towards this goal is to understand the origin of reaction barriers. In this study, we have investigated several catalytic reactions on some transition metal surfaces, using density functional theory. All the reaction barriers have been determined. By detailed analyses we obtain some insight into the reaction barrier. Each barrier is related to (i) the potential energy surface of reactants on the surface, (ii) the total chemisorption energy of reactants, and (iii) the metal d orbital occupancy and the reactant valency. (C) 2001 American Institute of Physics.