Flash-Sintering and Characterization of La0.8Sr0.2Ga0.8Mg0.2O3-δ Electrolytes for Solid Oxide Fuel Cells

La_0.8Sr_0.2Ga_0.8Mg_0.2O_3-δ (LSGM), a promising electrolyte material for intermediate temperature solid oxide fuel cells, can be sintered to a fully dense state by a flash-sintering technique. In this work, LSGM is sintered by the current-limiting flash-sintering process at 690°C under an electric field of 100 V cm^-1, in comparison with up to 1400°C or even higher temperature in conventional furnace sintering. The resultant LSGM samples are investigated by scanning electron microscopy, X-ray diffraction, and electrochemical impedance spectroscopy. The SEM images exhibit well-densified microstructures while XRD results show that the perovskite structure after flash-sintering does not changed. EIS results show that the conductivity of LSGM sintered by the current-limiting flash-sintering process increases with sintering current density value. The conductivity of samples sintered at 120 mA mm^-2 reaches 0.049 σ cm^-1 at 800°C, which is approximate to the value of conventional sintered LSGM samples at 1400°C. Additionally, the flash-sintering process is interpreted by Joule heating theory. Therefore, the current-limiting flash-sintering technique is proved to be an energy-efficient and eligible approach for the densification of LSGM and other materials requiring high sintering temperature.

The peculiar Type Ia supernova iPTF14atg: Chandrasekhar-mass explosion or violent merger?

iPTF14atg, a subluminous peculiar Type Ia supernova (SN Ia) similar to SN 2002es, is the first SN Ia for which a strong UV flash was observed in the early-time light curves. This has been interpreted as evidence for a single-degenerate (SD) progenitor system, where such a signal is expected from interactions between the SN ejecta and the non-degenerate companion star. Here, we compare synthetic observables of multidimensional state-of-the-art explosion models for different progenitor scenarios to the light curves and spectra of iPTF14atg. From our models, we have difficulties explaining the spectral evolution of iPTF14atg within the SD progenitor channel. In contrast, we find that a violent merger of two carbon-oxygen white dwarfs with 0.9 and 0.76 M⊙, respectively, provides an excellent match to the spectral evolution of iPTF14atg from 10 d before to several weeks after maximum light. Our merger model does not naturally explain the initial UV flash of iPTF14atg. We discuss several possibilities like interactions of the SN ejecta with the circumstellar medium and surface radioactivity from an He-ignited merger that may be able to account for the early UV emission in violent merger models.

Is there really "nothing you can do"? Pathways to enhanced flood-risk preparedness

Whilst policy makers have tended to adopt an ‘information-deficit model’ to bolster levels of flood-risk preparedness primarily though communication strategies promoting awareness, the assumed causal relation between awareness and preparedness is empirically weak. As such, there is a growing interest amongst scholars and policy makers alike to better understand why at-risk individuals are underprepared. In this vein, empirical studies, typically employing quantitative methods, have tended to focus on exploring the extent to which flood-risk preparedness levels vary depending not only on socio-demographic variables, but also (and increasingly so) the perceptual factors that influence flood risk preparedness. This study builds upon and extends this body of research by offering a more solution-focused approach that seeks to identify how pathways to flood-risk preparedness can be opened up. Specifically, through application of a qualitative methodology, we seek to explore how the factors that negatively influence flood-risk preparedness can be addressed to foster a shift towards greater levels of mitigation behaviour. In doing so, we focus our analysis on an urban community in Ireland that is identified as ‘at risk’ of flash flooding and is currently undergoing significant flood relief works. In this regard, the case study offers an interesting laboratory to explore how attitudes towards flood-risk preparedness at the individual level are being influenced within the context of a flood relief scheme that is only partially constructed. In order to redress the dearth of theoretically informed qualitative studies in this field, we draw on Protection Motivation Theory (PMT) to help guide our analysis and make sense of our results. Our findings demonstrate that flood-risk preparedness can be undermined by low levels of efficacy amongst individuals in terms of the preparedness measures available to them and their own personal capacity to implement them. We also elucidate that the ‘levee effect’ can occur before engineered flood defences are fully constructed as the flood relief works within our case study are beginning to affect people’s perception of flood risk in the case study area. We conclude by arguing that 1) individuals’ coping appraisals need to be enhanced through communication strategies and other interventions which highlight that future floods may not replicate past events; and 2) the concept of residual risk needs to be communicated at all stages of a flood relief scheme, not just upon completion.